MatchFlow achievement supervision and analysis of the Netzbtriebes
Article number: 20656
Listed in category: Service / Communicate-Control-Confirm > MatchFlow achievement supervision and analysis of the Netzbtriebes from brakensiek.de
Under the name Matchflow performance monitoring and analysis of the Net company we offer a service which is a building block for ensuring the availability of your IT environment is.
Since most network protocols so-called "conflict networks" have problems with the data packets are sent again and the reaction may, for example Excessive cascading deterioration in a network so dramatic that it is a total failure.
We placed this e.g. the Wavetek LT8600 one.
Item ID: LT8600TSP
Name: Category 6 LAN Cable Certifier
Features: Tests up to 300 MHz exceeding the requirement for emerging CAT 6/Class E standards
ETL Certified Level III Accuracy
Performs all advanced Power Sum measurements up to 300 MHz
Built in TDR capability
Options for single mode and multimode fiber optic testing
LT-Record Manager software supports all record keeping, reporting and certification requirements
Most Advanced Instrument In The IDEAL LT8000 Cable Certifier LAN Series Of
Supports emerging CAT 6/Class E standards and more!
Ships in hard-shell carrying case!
LT 8600T ships with a soft carrying case
The LT and LT 8600TSP 8600T are 300 MHz Level III high-performance cable certifiers that exceed the requirements for emerging CAT 6/Class E testing standards.
The competitive nature of the cable installation market demands that you are prepared to complete testing activities for every type of network design. The LT and LT 8600T 8600TSP allow you to perform all required tests, including tests on emerging CAT 6/Class E standards, helping you keep pace with new business opportunities.
Tests up to 300 MHz exceeding the requirement for emerging CAT 6/Class E standards
Vendor Specific adapters required for testing CAT 6 systems, see accessory page for listing of available adapters
Performs all advanced Power Sum measurements up to 300 MHz
Supports up to 15 different tests individually or in a test suite
Built in TDR capability
Options for single mode and multimode fiber optic testing
Talkset capability
LT-Record Manager software supports all record keeping, reporting and certification requirements
Easy-to-use button interface
Backed by IDEAL's world class customer service
The replacement of many individual switches cascaded by one or more than 10 Gigabit "stacked" D-Link DXS-3350SR is currently the cheapest and most powerful solution for an operation when he works with high-resolution data.
This Layer 3 Switch from D-Link Business Enterprise Series offers extensive scalability, high Gigabit port densities by the possibility of stacking to form a ring or star on two fixed 10 Gigabit stacking ports.
X-Stack thus stands for performance and secure connection in the backbone area of an enterprise network. This is confirmed by a test of the Real World Labs, here, the DXS-3350SR winner. The DXS-3350SR features with its 44x 10/100/1000 TP (RJ-45) ports already as a stand alone device with a high Gigabit port densities. Four other 1000Mbit TP (RJ-45) combo ports can be used either as a Gigabit copper port, or converted by Mini GBIC Module for Gigabit Fiber Optic ports. Thus, the switch offers 48 pre-installed Gigabit TP ports and a non-blocking switch fabric of 176Gbit.
The DXS-3350SR can still be connected to up to eight devices to a ring stack or up to six devices at a star-stack. The star of the DGS-3324SRi is from the already successful Layer3 Gigabit Stack Switch series as a master.
The achieved here Gigabit port number is in the ring 384, 312th in the star
After installing the separately sold are 10 Gigabit uplink module and the corresponding XFP transceivers, two other optional 10 gigabit ports are available and connect the stack with another stack or the parent backbone switches.
Besides the possibility of the DXS-3250SR supports stacking the single IP management and enables the management of up to 32 devices over a single IP address. This technology of "virtual stacking" multiple devices to an administration unit are grouped together. This means a considerable relief of the administration, because distance barriers between devices play no role. All x-stack devices have to increase the reliability a connection for an optional redundant power supply.
The X-Stack Switch family is a solution-oriented network so that all claims of justice: An X-Stack offers high port density for easier administration, flexible connectivity and bandwidth that ensures reliable use of its features.
The DXS-3350SR is just one of several devices of our latest enterprise business technology. It is part of an entire product group, which covers all the needs in the high end range. Other units of the xStack DGS-series are the 3324SRi, DGS-3324SR, DXS-3326GSR.
For this unit, we offer a limited lifetime warranty. For more information, click here
Since most network protocols so-called "conflict networks" have problems with the data packets are sent again and the reaction may, for example Excessive cascading deterioration in a network so dramatic that it is a total failure.
We placed this e.g. the Wavetek LT8600 one.
Item ID: LT8600TSP
Name: Category 6 LAN Cable Certifier
Features: Tests up to 300 MHz exceeding the requirement for emerging CAT 6/Class E standards
ETL Certified Level III Accuracy
Performs all advanced Power Sum measurements up to 300 MHz
Built in TDR capability
Options for single mode and multimode fiber optic testing
LT-Record Manager software supports all record keeping, reporting and certification requirements
Most Advanced Instrument In The IDEAL LT8000 Cable Certifier LAN Series Of
Supports emerging CAT 6/Class E standards and more!
Ships in hard-shell carrying case!
LT 8600T ships with a soft carrying case
The LT and LT 8600TSP 8600T are 300 MHz Level III high-performance cable certifiers that exceed the requirements for emerging CAT 6/Class E testing standards.
The competitive nature of the cable installation market demands that you are prepared to complete testing activities for every type of network design. The LT and LT 8600T 8600TSP allow you to perform all required tests, including tests on emerging CAT 6/Class E standards, helping you keep pace with new business opportunities.
Tests up to 300 MHz exceeding the requirement for emerging CAT 6/Class E standards
Vendor Specific adapters required for testing CAT 6 systems, see accessory page for listing of available adapters
Performs all advanced Power Sum measurements up to 300 MHz
Supports up to 15 different tests individually or in a test suite
Built in TDR capability
Options for single mode and multimode fiber optic testing
Talkset capability
LT-Record Manager software supports all record keeping, reporting and certification requirements
Easy-to-use button interface
Backed by IDEAL's world class customer service
The replacement of many individual switches cascaded by one or more than 10 Gigabit "stacked" D-Link DXS-3350SR is currently the cheapest and most powerful solution for an operation when he works with high-resolution data.
This Layer 3 Switch from D-Link Business Enterprise Series offers extensive scalability, high Gigabit port densities by the possibility of stacking to form a ring or star on two fixed 10 Gigabit stacking ports.
X-Stack thus stands for performance and secure connection in the backbone area of an enterprise network. This is confirmed by a test of the Real World Labs, here, the DXS-3350SR winner. The DXS-3350SR features with its 44x 10/100/1000 TP (RJ-45) ports already as a stand alone device with a high Gigabit port densities. Four other 1000Mbit TP (RJ-45) combo ports can be used either as a Gigabit copper port, or converted by Mini GBIC Module for Gigabit Fiber Optic ports. Thus, the switch offers 48 pre-installed Gigabit TP ports and a non-blocking switch fabric of 176Gbit.
The DXS-3350SR can still be connected to up to eight devices to a ring stack or up to six devices at a star-stack. The star of the DGS-3324SRi is from the already successful Layer3 Gigabit Stack Switch series as a master.
The achieved here Gigabit port number is in the ring 384, 312th in the star
After installing the separately sold are 10 Gigabit uplink module and the corresponding XFP transceivers, two other optional 10 gigabit ports are available and connect the stack with another stack or the parent backbone switches.
Besides the possibility of the DXS-3250SR supports stacking the single IP management and enables the management of up to 32 devices over a single IP address. This technology of "virtual stacking" multiple devices to an administration unit are grouped together. This means a considerable relief of the administration, because distance barriers between devices play no role. All x-stack devices have to increase the reliability a connection for an optional redundant power supply.
The X-Stack Switch family is a solution-oriented network so that all claims of justice: An X-Stack offers high port density for easier administration, flexible connectivity and bandwidth that ensures reliable use of its features.
The DXS-3350SR is just one of several devices of our latest enterprise business technology. It is part of an entire product group, which covers all the needs in the high end range. Other units of the xStack DGS-series are the 3324SRi, DGS-3324SR, DXS-3326GSR.
For this unit, we offer a limited lifetime warranty. For more information, click here
Contact:
Your contact person: Tim Brakensiek
services
last update:
07.02.2012
