X-Rite i1iO Scantable
Article number: 27168
Listed in category: Measurement / Automatic Chart Scanning > X-Rite i1iO Scantable from brakensiek.de
GretagMacbeth Eye-One iO scan table
Qualities:
Automatic measuring table for all i1Pro measuring instruments
- allows constant and reliable measuring results
- avoids manual measuring mistakes
- if the productiveness increases
Measuring speed up to 500 fields per minute (depending on the type
used i1Pro)
Suitable for substrates up to 10 mm of thickness
Automatic holding on of the substrate by electrostatic loading of her
Measuring surface
For quick scanning measuring special test charts are required,
the following parametres keep:
- Testchartgröße to 32 cm * 23 cm possibly
- Field size minimally 5 mm * 5 mm
- Colour distance between two fields ΔE> 10 or
- 1 mm of gaps between the fields (black or knows)
Files to the expression of test charts and their authoritative files are in him
to respective software programmes available, also the control of the device
permit.
In the single measuring mode every current Testchart is measurable (5 mm * 5 mm of fields).
technical data:
i1Pro (spectral measuring head)
Measuring geometry: 45 °/0 °-ring optics (circular lighting)
Source of light: gas-filled wolfram lamp, light kind A
Screen diameter: 4.5 mm
Measuring area: 380 nm - 730 nm, reflexion from 0 to 200%
Spectral resolution: Inside: 3.5 nm, issue: 10 nm
Device divergence: middle ΔE94 <= 0.4 (more than 12 tiles BCRA)
Repeat exactness: ΔE94 = 0.1 (on white ceramics)
Measuring surface/-unterlage:weiss after ISO 12647 / defined base possibly
Physical filters: No or UV cut (not changeable)
Interface: USB 1.1
Qualities:
Automatic measuring table for all i1Pro measuring instruments
- allows constant and reliable measuring results
- avoids manual measuring mistakes
- if the productiveness increases
Measuring speed up to 500 fields per minute (depending on the type
used i1Pro)
Suitable for substrates up to 10 mm of thickness
Automatic holding on of the substrate by electrostatic loading of her
Measuring surface
For quick scanning measuring special test charts are required,
the following parametres keep:
- Testchartgröße to 32 cm * 23 cm possibly
- Field size minimally 5 mm * 5 mm
- Colour distance between two fields ΔE> 10 or
- 1 mm of gaps between the fields (black or knows)
Files to the expression of test charts and their authoritative files are in him
to respective software programmes available, also the control of the device
permit.
In the single measuring mode every current Testchart is measurable (5 mm * 5 mm of fields).
technical data:
i1Pro (spectral measuring head)
Measuring geometry: 45 °/0 °-ring optics (circular lighting)
Source of light: gas-filled wolfram lamp, light kind A
Screen diameter: 4.5 mm
Measuring area: 380 nm - 730 nm, reflexion from 0 to 200%
Spectral resolution: Inside: 3.5 nm, issue: 10 nm
Device divergence: middle ΔE94 <= 0.4 (more than 12 tiles BCRA)
Repeat exactness: ΔE94 = 0.1 (on white ceramics)
Measuring surface/-unterlage:weiss after ISO 12647 / defined base possibly
Physical filters: No or UV cut (not changeable)
Interface: USB 1.1
new products
last update:
21.05.2012
