HEGA-301 humidity measuring instrument
Article number: 27199
Listed in category: Measurement / Wire and Cables > HEGA-301 humidity measuring instrument from brakensiek.de
HEGA-301 humidity measuring instrument
For solids such as
Wood, veneer, Häcksel, shred, Mörtel, plaster, gypsum, lime sandstone, concrete, screed, Unterlagsböden, etc.
Wooden hygrometer and building material hygrometer with measuring value memory:
Scope of supply HEGA-301:
Measuring instrument with 9V-battery, short points 5 mm, top cover and operating instructions
Preface
The humidity measuring instruments HEGA are of schweizer high-class products which are for over 40 years with carpenters, carpenters, in Sagereien, on the construction, with architects, Bodenlegern, plasterers, Schadensanierern, in veneer works, schools, etc. in use application. Thanks to the easy service, the excellent quality and the favorable price / achievement relation these measuring instruments are liked with practical people very much and are introduced worldwide.
HEGA-301 is equipped with a microcontroller and misses the humidity in solids fast and very exactly. The measured humidity value is indicated digitally. Because the device on wood was calibrated, the humidity of the other solids must be determined by means of conversion tables.
Introduction
HEGA-301 misses the humidity in wood, gypsum *, concrete *, plaster *, Unterlagsböden *, etc. fast and very exactly. More than two electrodes the material to be measured is put on electric power on. The electric conductivity of the Pr Ents. Of solid changes according to moist salary, the moist values can be read as a digital numerical value. To the forest plantation area of the battery the measuring instrument switches off itself after approx. 5 min. automatically. The moist divergences with different species of wood are given in correction tables.
The measuring probes can be very simply exchanged. With a fork wrench or a flat-nose plier they can be solved and be screwed by hand. Different measuring probes are available (see accessories below): With the level probes non destructive measurements can be carried out, also veneers and very thin materials can be measured. With the short points the humidity is measured in a depth of approx. 5 mm. With the long points can be measured till a depth of 40 mm. Here should be prebored or be prepunched.
Technical data:
Measuring area: 6% - 39% in wood (optionally 15% - 99%), in building materials from 0.3% with conversion tables
Measuring depth: 0 - 40 mm (according to measuring probe)
Dimensions: 94/159/34 mm
LCD display: 60/15 mm
Weight: 400 gr.
Cable length: approx. 65 cm
Temperature compensation incl.
Memory for 100 measuring values
Computer interface: RS 232
Average value calculation
Battery: 9 volts
Guarantee: 1 year
Technical changes reserve
For solids such as
Wood, veneer, Häcksel, shred, Mörtel, plaster, gypsum, lime sandstone, concrete, screed, Unterlagsböden, etc.
Wooden hygrometer and building material hygrometer with measuring value memory:
Scope of supply HEGA-301:
Measuring instrument with 9V-battery, short points 5 mm, top cover and operating instructions
Preface
The humidity measuring instruments HEGA are of schweizer high-class products which are for over 40 years with carpenters, carpenters, in Sagereien, on the construction, with architects, Bodenlegern, plasterers, Schadensanierern, in veneer works, schools, etc. in use application. Thanks to the easy service, the excellent quality and the favorable price / achievement relation these measuring instruments are liked with practical people very much and are introduced worldwide.
HEGA-301 is equipped with a microcontroller and misses the humidity in solids fast and very exactly. The measured humidity value is indicated digitally. Because the device on wood was calibrated, the humidity of the other solids must be determined by means of conversion tables.
Introduction
HEGA-301 misses the humidity in wood, gypsum *, concrete *, plaster *, Unterlagsböden *, etc. fast and very exactly. More than two electrodes the material to be measured is put on electric power on. The electric conductivity of the Pr Ents. Of solid changes according to moist salary, the moist values can be read as a digital numerical value. To the forest plantation area of the battery the measuring instrument switches off itself after approx. 5 min. automatically. The moist divergences with different species of wood are given in correction tables.
The measuring probes can be very simply exchanged. With a fork wrench or a flat-nose plier they can be solved and be screwed by hand. Different measuring probes are available (see accessories below): With the level probes non destructive measurements can be carried out, also veneers and very thin materials can be measured. With the short points the humidity is measured in a depth of approx. 5 mm. With the long points can be measured till a depth of 40 mm. Here should be prebored or be prepunched.
Technical data:
Measuring area: 6% - 39% in wood (optionally 15% - 99%), in building materials from 0.3% with conversion tables
Measuring depth: 0 - 40 mm (according to measuring probe)
Dimensions: 94/159/34 mm
LCD display: 60/15 mm
Weight: 400 gr.
Cable length: approx. 65 cm
Temperature compensation incl.
Memory for 100 measuring values
Computer interface: RS 232
Average value calculation
Battery: 9 volts
Guarantee: 1 year
Technical changes reserve
Contact:
Your contact person: Tim Brakensiek
new products
last update:
21.05.2012
