DuPont Cyrel 3000 P
Article number: 31322
We are looking to purchase this item.
We do not have this item on stock.
We do not have this item on stock.
Listed in category: Plateprocessors > DuPont Cyrel 3000 P from brakensiek.de
DuPont Cyrel 3000 P
State-of-the-art incremental solvent processor.
DuPont™ Cyrel® 3000 P is capable of processing highest quality photopolymer plates up to a nominal format of 132 cm x 200 cm - 52 inch x 80 inch.
The unit is easy to support and maintain, simple to operate,
extremely reliable and robust and cheep to run.
An innovative washout concept consisting of six flat brushes transverse to each other and contra-rotating round brushes wash out the nonpolymerised (non-exposed) parts of the plate. The solvent reaches the brushes directly via brush holders and bore holes. This completely renewed washout system warrants the best plate quality.
High dot resolution, excellent line definition, deep reverses and clean
floor are achieved to meet the highest Flexo standard irrespective of whether thick, thin, narrow or large plates are being washed.
The solvent temperature is programmable between 20°C - 68°F and 40°C - 104°F to handle the different type and brands of solvents available in
the industry.
Constants processing conditions and reduced solvent consumption are
warranted by the replenishment system. In fact, solvent replenishment is done only when needed; i.e. the integration with new solvent is controlled by a viscometer, which is constantly monitoring the solvent saturation during the entire process.
The unit is operated and controlled trough a large intuitive colour touch screen panel. The computer control board may store up to twentyone
different wash-out plate programs where all the individual processing
parameter can be customised to reach excellent wash-out quality that can be consistently repeated from plate to plate. The plate processing speed can also be pre-set and adapted to the individual plate types.
Removal of solvent and final cleaning of the plate takes place through contra-rotating round brushes moistened with fresh solvent.
The processor is delivered in one piece and a standard configuration includes:
full technical documentation, CE Certification, 3 Pin bars, 1 Heater, 1 Chiller, 1 Catch tray, 1 Barrel pump (fresh solvent), 1 float switch for fresh solvent drum, 1 float switch for dirty solvent drum, 2 x 3 m solvent resistant hose, 2 x 2 m hoses for connection to the Heater/Chiller, 3 m exhaust tube.
After transportation to its final location, no adjustments are necessary.
State-of-the-art incremental solvent processor.
DuPont™ Cyrel® 3000 P is capable of processing highest quality photopolymer plates up to a nominal format of 132 cm x 200 cm - 52 inch x 80 inch.
The unit is easy to support and maintain, simple to operate,
extremely reliable and robust and cheep to run.
An innovative washout concept consisting of six flat brushes transverse to each other and contra-rotating round brushes wash out the nonpolymerised (non-exposed) parts of the plate. The solvent reaches the brushes directly via brush holders and bore holes. This completely renewed washout system warrants the best plate quality.
High dot resolution, excellent line definition, deep reverses and clean
floor are achieved to meet the highest Flexo standard irrespective of whether thick, thin, narrow or large plates are being washed.
The solvent temperature is programmable between 20°C - 68°F and 40°C - 104°F to handle the different type and brands of solvents available in
the industry.
Constants processing conditions and reduced solvent consumption are
warranted by the replenishment system. In fact, solvent replenishment is done only when needed; i.e. the integration with new solvent is controlled by a viscometer, which is constantly monitoring the solvent saturation during the entire process.
The unit is operated and controlled trough a large intuitive colour touch screen panel. The computer control board may store up to twentyone
different wash-out plate programs where all the individual processing
parameter can be customised to reach excellent wash-out quality that can be consistently repeated from plate to plate. The plate processing speed can also be pre-set and adapted to the individual plate types.
Removal of solvent and final cleaning of the plate takes place through contra-rotating round brushes moistened with fresh solvent.
The processor is delivered in one piece and a standard configuration includes:
full technical documentation, CE Certification, 3 Pin bars, 1 Heater, 1 Chiller, 1 Catch tray, 1 Barrel pump (fresh solvent), 1 float switch for fresh solvent drum, 1 float switch for dirty solvent drum, 2 x 3 m solvent resistant hose, 2 x 2 m hoses for connection to the Heater/Chiller, 3 m exhaust tube.
After transportation to its final location, no adjustments are necessary.
Contact:
Please only contact us via our registration form and only if you are a business person yourself.
We do not have an online shop. In order to avoid spam-mail, we had to introduce an established validation system.
This might be a little bit more work for you but it guarantees that we are able to supply you with an offer as quick and safe as possible.
As a basic principle, we do not make offers on the phone. As we receive more than 100 offers a day, we have up to 11 employees working making offers by mail.
To make it clear, you will not get offers generated by a system, but by our employees.
Offers for high-prized products take a little longer because they have to be approved by our managing director.
If the stoplight is red, we do not have the product on stock anymore, but we wish to purchase it.
If you fill out the registration form for this product, we will inform you as soon as the product or a similar product is available again.
Your contact person: Tim Brakensiek
Action Packs:
Here you will find our PDF product information for "SilverFast for Heidelberg Highend Scanners" and our action packs
Product information for SilverFast for Heidelberg Highend Scanners
Product overview for "SilverFast for Heidelberg Highend Scanners" from Gerhard Wolf,
Product overview for SilverFast for Heidelberg Highend Scanners
Important improvements to High-End Scanner: SilverFast 6.6
Product information for SilverFast for Heidelberg Highend Scanners
Product overview for "SilverFast for Heidelberg Highend Scanners" from Gerhard Wolf,
Product overview for SilverFast for Heidelberg Highend Scanners
Important improvements to High-End Scanner: SilverFast 6.6
Customers who viewed
DuPont Cyrel 3000 P
also viewed:
