FOGRA-ACET testing device
Article number: 31431
Listed in category: Forga measuring device > FOGRA-ACET testing device
from brakensiek.de
FOGRA-ACET testing device
Test device for determining the resistance of UV curable layers to solvents fogra-ACET
The print converting department within FOGRA often deals with UV curable varnishes and inks, and has to deliver many expert opinions dealing with that subject. A main source for complaints lies in an insufficient cure of UV curable varnishes which is very often caused by a dose of UV radiation that is too small or a setting of the production speed that is too high. Printing inks absorb the UV radiation to a different degree and thus do exert a direct influence on the curing process of the varnish coat lying on the ink film. The varnish layer remains sticky because of uncured molecules. These molecules cause blocking of stacks and can spoil the complete job. This example illustrates the importance of a reliable test method that documents the state of curing to the print finisher. Such a simple method is the manual acetone test. The test can easily be performed in the print shop: A piece of cloth is soaked with acetone and wiped over the varnish layer. Acetone is an aggressive solvent, it can dissolve the components of the varnish layer that are not completely cured. Uncured UV varnish is readily dissolved in acetone, whereas polymerized UV varnish is not. lf the varnish layer is badly cured, the varnish will be removed together with the printing ink lying underneath and the white paper will become visible. The higher the degree of polymerization, the more difficult is the dissolution of the varnish by solvents. This means that in this case you have to rub the soaked cloth more often over the surface in order to wipe off the printing inks. The results of this manual test, however, are very much influenced by the person carrying out the test. Because of this FOGRA developed a test device that enables the user to perform this test under defined conditions. The FOGRA test device for determining the resistance of UV curable layers to solvents (FOGRA ACET) offers easy handling and yields reproducible and comparable results:
• an amount of solvent is portioned with a pipette and a felt pad soaked with it.
• the pressure that the felt pad applies onto the sample is held constant by a spring after the lid has been closed.
• After closing of the lid the contact time of solvent and sample is measured and the sample pulled out of the device after a given time. FOGRA ACET offers the following features:
• low weight
• small dimensions
• sturdy construction
• hardly any maintainance
• reproducible results
• usable for most UV curable varnishes and inks
FOGRA ACET enables the user to easily and cost savingly forecast whether a UV curable layer is properly cured. With the results of this test in mind it is possible to take appropriate measures, e.g. increase the dose of UV radiation, to avoid costly complaints.
Test device for determining the resistance of UV curable layers to solvents fogra-ACET
The print converting department within FOGRA often deals with UV curable varnishes and inks, and has to deliver many expert opinions dealing with that subject. A main source for complaints lies in an insufficient cure of UV curable varnishes which is very often caused by a dose of UV radiation that is too small or a setting of the production speed that is too high. Printing inks absorb the UV radiation to a different degree and thus do exert a direct influence on the curing process of the varnish coat lying on the ink film. The varnish layer remains sticky because of uncured molecules. These molecules cause blocking of stacks and can spoil the complete job. This example illustrates the importance of a reliable test method that documents the state of curing to the print finisher. Such a simple method is the manual acetone test. The test can easily be performed in the print shop: A piece of cloth is soaked with acetone and wiped over the varnish layer. Acetone is an aggressive solvent, it can dissolve the components of the varnish layer that are not completely cured. Uncured UV varnish is readily dissolved in acetone, whereas polymerized UV varnish is not. lf the varnish layer is badly cured, the varnish will be removed together with the printing ink lying underneath and the white paper will become visible. The higher the degree of polymerization, the more difficult is the dissolution of the varnish by solvents. This means that in this case you have to rub the soaked cloth more often over the surface in order to wipe off the printing inks. The results of this manual test, however, are very much influenced by the person carrying out the test. Because of this FOGRA developed a test device that enables the user to perform this test under defined conditions. The FOGRA test device for determining the resistance of UV curable layers to solvents (FOGRA ACET) offers easy handling and yields reproducible and comparable results:
• an amount of solvent is portioned with a pipette and a felt pad soaked with it.
• the pressure that the felt pad applies onto the sample is held constant by a spring after the lid has been closed.
• After closing of the lid the contact time of solvent and sample is measured and the sample pulled out of the device after a given time. FOGRA ACET offers the following features:
• low weight
• small dimensions
• sturdy construction
• hardly any maintainance
• reproducible results
• usable for most UV curable varnishes and inks
FOGRA ACET enables the user to easily and cost savingly forecast whether a UV curable layer is properly cured. With the results of this test in mind it is possible to take appropriate measures, e.g. increase the dose of UV radiation, to avoid costly complaints.
Contact:
Please only contact us via our registration form and only if you are a business person yourself.
We do not have an online shop. In order to avoid spam-mail, we had to introduce an established validation system.
This might be a little bit more work for you but it guarantees that we are able to supply you with an offer as quick and safe as possible.
As a basic principle, we do not make offers on the phone. As we receive more than 100 offers a day, we have up to 11 employees working making offers by mail.
To make it clear, you will not get offers generated by a system, but by our employees.
Offers for high-prized products take a little longer because they have to be approved by our managing director.
If the stoplight is red, we do not have the product on stock anymore, but we wish to purchase it.
If you fill out the registration form for this product, we will inform you as soon as the product or a similar product is available again.
Your contact person: Tim Brakensiek
Action Packs:
Here you will find our PDF product information for "SilverFast for Heidelberg Highend Scanners" and our action packs
Product information for SilverFast for Heidelberg Highend Scanners
Product overview for "SilverFast for Heidelberg Highend Scanners" from Gerhard Wolf,
Product overview for SilverFast for Heidelberg Highend Scanners
The new advantages of: SilverFast 6.5
Product information for SilverFast for Heidelberg Highend Scanners
Product overview for "SilverFast for Heidelberg Highend Scanners" from Gerhard Wolf,
Product overview for SilverFast for Heidelberg Highend Scanners
The new advantages of: SilverFast 6.5
Customers who viewed
FOGRA-ACET testing device
also viewed:
- Abnahmehandbücher für Bogenoffset- und Akzidenz Rollenoffsetmaschinen
- FOGRA-ACET testing device
- Altona Test Suite – Anwendungspaket (Basis)
- FOGRA-HEX-Instrument (Heat Exhausting)
- DIN-Taschenbuch 367 – Normen für die Druck- und Medienindustrie
- Duplication testing system
- FOGRA Folding Device FI
- Farbraumerweiterung mit Intensivskalen
- FAX Fogra Aktuell 113
- Fehlerkatalog Papier, Druck und Druckweiterverarbeitung
- Fingerwischprüfgerät
- Ugra / Fogra Digital Print Scale
- FOGRA Measuring Bar (FMB)
- Ugra light indicator and Ugra metamerism card
- Ugra/FOGRA Reproduction Test Chart
- FOGRA Testform für digitaldrucksysteme
- fogra-CtP-Testform V1.1
- Ugra/FOGRA Digital Print Control Strip - Newsprint
- FOGRA Print Control Strip DKL
- The FOGRA test device for determining the adhesion of varnish layers
- FOGRA Vernier Scale FNM
- FOGRA-prozessor-Testform
- FOGRA rub off and carbonating test device
- FOGRA Contact Control Strip KKS
- Control Aids for Continuous Stationery Printing
- Kosten- und Leistungskatalog Druckweiterverarbeitung
- FOGRA Perforation Measurement Device
- Leitfaden Rating und Kreditverhandlungen
- Messen in Vorstufe und Druck – Farben, Dichten, Tonwerte
- Prinect/FOGRA-Dipco 2.0 colour measurement strip
- ProzessStandard Offsetdruck
- ProzessStandard Offsetdruck – Eine Einführung
- Ugra Display Analysis and Certification Tool (UDACT)
- Ugra fogra Medienkeil CMYK v2
- Ugra Fogra PostScript Control Strip
- Ugra/FOGRA Digital Plate Wedge
- UGRA Plate Control Wedge 1982
- Ugra/FOGRA Media Wedge CIELAB
- Ugra/FOGRA Digital Print Control Strip (PCS)
