FOGRA-HEX-Instrument (Heat Exhausting)
Article number: 31440
Listed in category: Measurement / Fogra Testformes, Test and Control Devices > FOGRA-HEX-Instrument (Heat Exhausting) from brakensiek.de
FOGRA-HEX-Instrument (Heat Exhausting)
Laboratory tool for investigating:
-the drying tendencies of Papers
subjected to thermal stress
-formaldehyde release during thermal
transfer printing (textile industry)
-the amount of residual toluene in
gravure printed products (with additional
detector).
Device description
The key element in the device is a heated plate. A sample of the material is moved over this plate and is in direct contact with it. The volatile substances given off by the material pass upwards and are condensed
by a cooler. The collected condensate can then be chemically analysed as required.
Technical Specifications
Device dimensions: 420 mm X 165 mm 600 mm
Processing speed for material samples: 0 to 99 mmls
SurFace temperature of the heating plate: Max 299 "C
Width of sample: 46 mm
Thickness of sample: 0.5 mm
Power supply: 220 V150 Hz, 5Al1.1 kW
Laboratory tool for investigating:
-the drying tendencies of Papers
subjected to thermal stress
-formaldehyde release during thermal
transfer printing (textile industry)
-the amount of residual toluene in
gravure printed products (with additional
detector).
Device description
The key element in the device is a heated plate. A sample of the material is moved over this plate and is in direct contact with it. The volatile substances given off by the material pass upwards and are condensed
by a cooler. The collected condensate can then be chemically analysed as required.
Technical Specifications
Device dimensions: 420 mm X 165 mm 600 mm
Processing speed for material samples: 0 to 99 mmls
SurFace temperature of the heating plate: Max 299 "C
Width of sample: 46 mm
Thickness of sample: 0.5 mm
Power supply: 220 V150 Hz, 5Al1.1 kW
Contact:
Your contact person: Tim Brakensiek
purchase list
last update:
21.05.2012
