basICColor control
Article number: 31504
Listed in category: Software / Colormanagement > basICColor control from brakensiek.de
basICColor control
Are you familiar with that problem: You have a proof print in your hands and you do not know how accurate it is? Does the proof match the offset standard or it is just a ”colorful" inkjet print?
With basICColor control the uncertainty is history.
basICColor control comes with a complete set of reference values for all printing conditions standardized in ISO 12647-2. You just measure an Ugra/ FOGRA media wedge that has been included in the proof print and you get an unbiased evaluation based on four criteria defined by FOGRA: paper simulation, average and maximum deviation of all color patches and maximum deviation of the four process inks. The results are visible at one glance – with a simple red/green "traffic light" system. If your customer is more demanding than the standard, you can add customers' criteria, which show a yellow traffic light, if exceeded. In order to proof to your printer´s that the proof print is OK, you get a detailed report that you staple to the proof. No open questions and no more misunderstanding! Of course basICColor control can be used with all targets, supported by basICColor catch, e.g. basICColor RGB control wedge for QC of film recorders and minilabs.
basICColor control – and you are in control.
Features:
- Quality control module for basICColor catch
- Supports all common printing targets and control wedges
- FOGRA Reference data for CMYK Media Wedge 1.x and 2.0 included
- Creates Individual reference files from ICC profiles or measurement values
- Detailed QC report
- Pass/Fail information with simple traffic light system
- Seamless integration and full automation through XML control files
Are you familiar with that problem: You have a proof print in your hands and you do not know how accurate it is? Does the proof match the offset standard or it is just a ”colorful" inkjet print?
With basICColor control the uncertainty is history.
basICColor control comes with a complete set of reference values for all printing conditions standardized in ISO 12647-2. You just measure an Ugra/ FOGRA media wedge that has been included in the proof print and you get an unbiased evaluation based on four criteria defined by FOGRA: paper simulation, average and maximum deviation of all color patches and maximum deviation of the four process inks. The results are visible at one glance – with a simple red/green "traffic light" system. If your customer is more demanding than the standard, you can add customers' criteria, which show a yellow traffic light, if exceeded. In order to proof to your printer´s that the proof print is OK, you get a detailed report that you staple to the proof. No open questions and no more misunderstanding! Of course basICColor control can be used with all targets, supported by basICColor catch, e.g. basICColor RGB control wedge for QC of film recorders and minilabs.
basICColor control – and you are in control.
Features:
- Quality control module for basICColor catch
- Supports all common printing targets and control wedges
- FOGRA Reference data for CMYK Media Wedge 1.x and 2.0 included
- Creates Individual reference files from ICC profiles or measurement values
- Detailed QC report
- Pass/Fail information with simple traffic light system
- Seamless integration and full automation through XML control files
new products
last update:
21.05.2012
