Heidelberg Primesetter 102
Article number: 31590
We are looking to purchase this item.
We do not have this item on stock.
We do not have this item on stock.
Listed in category: Imagesetters > Heidelberg Primesetter 102
from brakensiek.de
Heidelberg PrimeSetter 102
Not-New, without packacking, ex works
Max. imaging format 770x1070mm (30.3x42.1 inch)
Year of manufacture: December 2000
Inclusive Glunz & Jensen OLP processor (Model 125HS, Baujahr 02/01)
Inclusive Heidelberg Delta Tower
Inclusive Heidelberg Delta RIP version 8.x
Inclusive transport boxes for shipping from Germany to US
Imaging principle: Indrum principal, laser beam deflected by a rotating, air-cushioned prism
Light source: Laser diode emitting at 658 nm ±10, laser class 1
Scanning line length: 770 mm (internal drum circumference)
Resolution: Metric/inch
Spot sizes: Matched to the selected resolution of the Primesetter, minimum 12 µm, maximum 20 µm
Max. screen frequency: Film imaging: up to 120 lines/cm (305 lpi), Polyester printing plates: up to 70 lines/cm ( 187 lpi)
Repeat accuracy: ±5 µm over full format and eight films (color set) imaged in direct succession and ignoring distortion of photographic
material caused by changes in temperature and humidity
Output options: Positive, negative, right-reading and wrong-reading; Duplo, Double-Duplo and Quadro
Photographic material: Film, polyester printing plates 0.1 – 0.3mm, in roll form: thick; sensitive to light emissions at 650 – 670 nm
Material specifications: Core diameter 72mm with special side flanges; emulsion outside; special packaging for inserting into the supply cassette during daylight operation
Capacity of supply cassette: Max. 75 m of 0.10mm-thick photographic material, dependent on material
Interfaces: SpeedWayR interface
Voltage: 115 or 230VAC
Power consumption: 0.7 kW at 115 and 230 V
Ambient temperature: +18°C to +28°C
Humidity: 45 – 80%, non-condensing
Not-New, without packacking, ex works
Max. imaging format 770x1070mm (30.3x42.1 inch)
Year of manufacture: December 2000
Inclusive Glunz & Jensen OLP processor (Model 125HS, Baujahr 02/01)
Inclusive Heidelberg Delta Tower
Inclusive Heidelberg Delta RIP version 8.x
Inclusive transport boxes for shipping from Germany to US
Imaging principle: Indrum principal, laser beam deflected by a rotating, air-cushioned prism
Light source: Laser diode emitting at 658 nm ±10, laser class 1
Scanning line length: 770 mm (internal drum circumference)
Resolution: Metric/inch
Spot sizes: Matched to the selected resolution of the Primesetter, minimum 12 µm, maximum 20 µm
Max. screen frequency: Film imaging: up to 120 lines/cm (305 lpi), Polyester printing plates: up to 70 lines/cm ( 187 lpi)
Repeat accuracy: ±5 µm over full format and eight films (color set) imaged in direct succession and ignoring distortion of photographic
material caused by changes in temperature and humidity
Output options: Positive, negative, right-reading and wrong-reading; Duplo, Double-Duplo and Quadro
Photographic material: Film, polyester printing plates 0.1 – 0.3mm, in roll form: thick; sensitive to light emissions at 650 – 670 nm
Material specifications: Core diameter 72mm with special side flanges; emulsion outside; special packaging for inserting into the supply cassette during daylight operation
Capacity of supply cassette: Max. 75 m of 0.10mm-thick photographic material, dependent on material
Interfaces: SpeedWayR interface
Voltage: 115 or 230VAC
Power consumption: 0.7 kW at 115 and 230 V
Ambient temperature: +18°C to +28°C
Humidity: 45 – 80%, non-condensing
Contact:
Please only contact us via our registration form and only if you are a business person yourself.
We do not have an online shop. In order to avoid spam-mail, we had to introduce an established validation system.
This might be a little bit more work for you but it guarantees that we are able to supply you with an offer as quick and safe as possible.
As a basic principle, we do not make offers on the phone. As we receive more than 100 offers a day, we have up to 11 employees working making offers by mail.
To make it clear, you will not get offers generated by a system, but by our employees.
Offers for high-prized products take a little longer because they have to be approved by our managing director.
If the stoplight is red, we do not have the product on stock anymore, but we wish to purchase it.
If you fill out the registration form for this product, we will inform you as soon as the product or a similar product is available again.
Your contact person: Tim Brakensiek
Action Packs:
Here you will find our PDF product information for "SilverFast for Heidelberg Highend Scanners" and our action packs
Product information for SilverFast for Heidelberg Highend Scanners
Product overview for "SilverFast for Heidelberg Highend Scanners" from Gerhard Wolf,
Product overview for SilverFast for Heidelberg Highend Scanners
The new advantages of: SilverFast 6.5
Product information for SilverFast for Heidelberg Highend Scanners
Product overview for "SilverFast for Heidelberg Highend Scanners" from Gerhard Wolf,
Product overview for SilverFast for Heidelberg Highend Scanners
The new advantages of: SilverFast 6.5
Customers who viewed
Heidelberg Primesetter 102
also viewed:
- Agfa
- Agfa Accuset 800
- Agfa Avantra 25
- Agfa Avantra 25E
- Agfa Avantra 25E Online
- Agfa Avantra 44
- Agfa Avantra 44S
- Agfa Avantra 44S B1
- Agfa Multistar RIP
- AGFA PCI to APIS Board PC
- Agfa Phoenix 2250
- Agfa ProSet 9800
- AGFA SelectSet 7000 with punch
- AGFA SelectSet Avantra 25E + Viper 3 RIP + Glunz & Jensen Multiline Pro 55 Offline
- Agfa Apogee Viper 3 04 Dongle
- Agfa Viper 3 01 Dongle
- Agfa Apogee PDF-Workflow für Agfa Phoenix 2250
- Austauschen Hercules
- Flexo CTF Imagesetter Barco 3800/00
- Barco Megasetter 600 S
- Barco Megasetter 600 S Plus
- Barco Megasetter
- Beil Precision Punch and Cutter 640N SM52
- Bobst Format 50 x 70 cm
- Check via Testprogramm Hercules
- Creo Imagesetter Dolev 800 V1, V2 V3, Plus, UHR gesucht zum Ankauf
- Creo Scitex Dolev 4press
- Delta Workstation
- Dolev800V-V2 Brisque Pro with Echo Graphic GL 901 + Brisque V5
- ECRM Mako 4 CTP
- used ECRM Mako/ Stingray/Merlin Imagesetter 36/46/56/63
- ECRM Mako 4625 mit Harlqeuin RIP V 6.2 und Update auf 7.2 auf Wunsch + Fujitsu Primergy Server
- ECRM Mako4matic
- ECRM NewsMatic
- ECRM Scriptsetter VR45/HS
- Esko Graphics Plate Driver 4 + Entwickler SDP 880
- Fuji Celix 4000
- Fuji Luxel FS9000 Two Beam CTF ( Computer-To-Film )
- Heidelberg PrimeSetter 102
- Heidelberg Hercules Basic + Delta 7.5
- Heidelberg Herkules Basic
- Heidelberg Hercules Elite
- Heidelberg Primesetter 102
- Heidelberg Primesetter 102
- Heidelberg PrimeSetter 102
- Heidelberg Primesetter 74
- Heidelberg Topsetter 102PF
- Heidelberg Trendsetter 3244 Very Fast AL
- Hell Helio-Klischograph K 202 Simultan Cylinder Gravure Maschine
- Linotype-Hell Hercules Classic
- Heidelberg Hercules Elite
- Linotype-Hell/Heidelberg Hercules Pro with Online Developer Glunz & Jensen ML 860
- Hercules/OLP mit Meta Dimension 5.x + MD Hercules Connect + Prinect Signa 1.5 + Supertrap + Supercolor + Designjet 120 NR
- Kontrolle hercules
- Linotype Hell Linotronic 560 A2 11.95 + HQ RIP V5.5 + OLP
- Linotype-Hell Linotronic 630
- Linotype-Hell Quasar for Speedmaster SM52 with punch
- Linotype-Hell R3030PS mit Online-Entwicklungsmaschine Glunz & Jensen
- Linotronic 300
- Linotronic 300
- Linotype-Hell Linotronic 530 + OLP
- Linotype-Hell Linotronic 530 + RIP 50
- Linotype Hell Linotronic 560, Typ LTC 560
- Linotype Hell Signasetter Pro
- Linotype-Hell Herkules Classic
- Linotype-Hell Hercules Pro + Delta 8.x + Delta Tower + RIP PC
- Linotype-Hell Linotronic 260
- Linotype-Hell Linotronic 330 + RIP 50
- Linotype-Hell Linotronic 560
- Linotype-Hell Quasar
- Linotype-Hell Quasar
- Linotype-Hell Quasar
- Linotype-Hell Quasar Polyester CTP + Eingabe- und Ausgabekassette + Beil Precision Cutter + Heidelberg Delta + Mitsubishi SDP 63
- LTC 630 mit Bacher Stanze und RIP
- Luxel F-9000 3-beam
- Reinigen Hercules
- Scantext Rondo 338 mit RIP und Entwicklungsmaschine
- ScanText Tempo A2
- Screen Imagesetter FT-R 3050 with OLP LD-1060, HQ 310 RIP and Kodak Polychrome CMS Muxer Multi 1
- Screen PlateRite 8000
- Screen PlateRite 8600
- Screen PTR 8600
- Sicherheitsschleife auf Funktion prüfen Hercules
- Linotype-Hell Signasetter mit OLP 770x1070 mm
- Spannungen prüfen Hercules
- Testbelichtung Hercules
- Umgebungbedingungen erfüllen Hercules
- Update Installieren Hercules
- Wartungscheck Hercules Testprogramm
- Wartungszyklus Hercules



















