irSys-Spektrometer Modul
Article number: 31684
Listed in category: Measurement / Automatic Chart Scanning > irSys-Spektrometer Modul from brakensiek.de
irSys-Spektrometer module
Compact and configureable Infrared Spektrometer on the basis of the newest MEMS technology for the application in the on-line process supervision.
As opposed to FT to Ir-spectral photometers works irSys not with a detector line, but with single detectors. This is realised by the use of micro-electric-mechanical systems (MEMS).
The Spektrometer works after the principle dispersiver Gitterspektrometer. Besides, the main component is a micromirror which steers the spectral shares disassembled by the declension grid periodically on single detectors. This can be configured by the use of different grids and detectors irSys for different wavelength areas.
By means of integrated logic components a preprocessing of the spectral data occurs. These are transferred about USB-or a RS-485 interface to a PC or laptop. User software allows the representation and subsequent treatment of the data. Specific customer standards can be considered by adaptation of the proficient product.
On account of small Abmaße and low weight the irSys module is suited to the construction of portable Infrarot-Spektrometer or for the integration in customised arrangements. On inquiry we send to you with pleasure other information or offer to you support in the solution of your duties.
Technical data (Typical values)
System information
SNR
with 1see measuring time> 10.000:1
Spectral resolution
<9 nm
Wavelength areas (examples)
Type I: From 660nm to 1730nm
Type II: From 910nm to 2390nm
Gap width
300 µ m
Optical coupling
Phase pure coupling FSMA or free ray
Measuring time
min 4 ms
A/D converter
16-bit A / D converter, 1MSPS
Interface
Interfaces
USB, RS-485
Electricity supply
9 - 18 V / 18 - 36 V
Achievement admission
<15 W
Temperature area
0 - 40 °C
Mechanical data
Mass (HxBxT)
60 x 70 x 110 mm
Compact and configureable Infrared Spektrometer on the basis of the newest MEMS technology for the application in the on-line process supervision.
As opposed to FT to Ir-spectral photometers works irSys not with a detector line, but with single detectors. This is realised by the use of micro-electric-mechanical systems (MEMS).
The Spektrometer works after the principle dispersiver Gitterspektrometer. Besides, the main component is a micromirror which steers the spectral shares disassembled by the declension grid periodically on single detectors. This can be configured by the use of different grids and detectors irSys for different wavelength areas.
By means of integrated logic components a preprocessing of the spectral data occurs. These are transferred about USB-or a RS-485 interface to a PC or laptop. User software allows the representation and subsequent treatment of the data. Specific customer standards can be considered by adaptation of the proficient product.
On account of small Abmaße and low weight the irSys module is suited to the construction of portable Infrarot-Spektrometer or for the integration in customised arrangements. On inquiry we send to you with pleasure other information or offer to you support in the solution of your duties.
Technical data (Typical values)
System information
SNR
with 1see measuring time> 10.000:1
Spectral resolution
<9 nm
Wavelength areas (examples)
Type I: From 660nm to 1730nm
Type II: From 910nm to 2390nm
Gap width
300 µ m
Optical coupling
Phase pure coupling FSMA or free ray
Measuring time
min 4 ms
A/D converter
16-bit A / D converter, 1MSPS
Interface
Interfaces
USB, RS-485
Electricity supply
9 - 18 V / 18 - 36 V
Achievement admission
<15 W
Temperature area
0 - 40 °C
Mechanical data
Mass (HxBxT)
60 x 70 x 110 mm
purchase list
last update:
21.05.2012
