EonStor A16F G2221
Article number: 32820
Listed in category: IT Systems / Enterprise Storage Solutions (RAID, SAN, NAS) > EonStor A16F G2221 from brakensiek.de
EonStor A16F-G2221
* FC-2G to SATA-II RAID subsystem
* ASIC 266 architecture capable of unprecedented read/write performance: 386/310 (MB/sec)
* Enhanced modular enclosure design
* Highest density in 3U rack space for 16 3.5”drives
* Up to 64TB capacity per Logical Drive (LD) (OS dependent)
* DDR Memory up to 2GB
Configuration Model Form Factor
Single A16F-G2221 3U Rackmount
Specifications
RAID
Multiple arrays configurable with dedicated or global hot spares
RAID levels supported: RAID 0, 1 (0+1), 3, 5, 10, 30, 50, NRAID, and JBOD
Online expansion by
1. Adding new drives
2. Copying and replacing drives with drives of larger capacity
Automatic background rebuild
Configurable stripe size and write policy per array
Intelligent Drive Handling
* In degraded mode: Skipping irreparable blocks to continue rebuild
* In normal operation: Data block verification and repair
* Task Scheduler: Hands-free Media Scan maintenance
System Components
* 3U-profile RAID enclosure
* Single RAID controller
* 16 drive trays
* Dual redundant power supplies
* 2 hot-swappable, dual-speed fan modules
* Optional battery backup unit (BBU) supported
Management
Java-based GUI RAID manager
Centralized management of multiple arrays over in-band or Ethernet
Event notification: email, LAN broadcast, fax, SMS, MSN, ICQ, or SNMP traps
Host-side SES emulation with pass-through to back-end SES emulation
SNMP 2.0 MIBs with get and set commands
Firmware-embedded utility via LCD keypad or RS-232C port
Drive Interface
Up to 1024 LUNs if sufficiently large memory is used with the proper settings
3.5-inch, 1-inch high 3Gbps SATA-II disk drives
16 hot-swappable drive trays
Automatic bad sector reassignment
Dedicated bandwidth to each connected drive
Host Interface
Auto-negotiate FC-AL, point-to-point, or switched fabric
Concurrent I/O commands
Tagged Command queuing up to 256
Variable stripe size per logical drive
Optimization setting for random or sequential I/Os
Maintenance & Availability
Optional Li-ION battery support
Immediate array availability
Drive roaming, array configuration on drives
Controller voltage and temperature self-diagnostics
Auto Switch cache policy and Auto Shutdown
When a RAID controller detects conditions exceeding preset thresholds, the following actions will be exerted to protect the hardware:
1. Automatically flush cached data and switch the array's caching mode from write-back to write-through
2. Commence an auto shutdown
All environmental thresholds associated with this mechanism are user-configurable and the caching mode changes back to write-back once normal condition is restored.
Physical/Electrical
Interfaces
* 2 SFP sockets, each using a short-wavelength adapter
* 2 audio jacks for RS-232C serial port (38400, n, 8, 1) and UPS support
* RJ-45 Ethernet port
Power Supply
2 redundant, hot-swappable power supplies with PFC
Input: 100 to 240VAC, 47 to 63Hz
Output: +5V, 32A max.; +12V, 32A max.; +3.3V, 30A max.; 460 Watt capacity
Cooling Fan
4 cooling fans in 2 separate modules
Environmental Specifications
Operating temperature: 5 to 40° C
Non-operating temperature: - 40º to 60ºC
Relative humidity: 10 to 95%, non-condensing
Operating altitude: sea level to 10,000ft
Dimensions:
Chassis dimensions without handles: 131H x 482.6W x 504.3D mm
Chassis dimensions with handles: 130H x 445.0W x 488.2D mm
Package dimensions: 423H x 567W x 772D mm
System weight (w/o drives):
Net weight: 28.5kg
Gross weight: 30.5kg
* FC-2G to SATA-II RAID subsystem
* ASIC 266 architecture capable of unprecedented read/write performance: 386/310 (MB/sec)
* Enhanced modular enclosure design
* Highest density in 3U rack space for 16 3.5”drives
* Up to 64TB capacity per Logical Drive (LD) (OS dependent)
* DDR Memory up to 2GB
Configuration Model Form Factor
Single A16F-G2221 3U Rackmount
Specifications
RAID
Multiple arrays configurable with dedicated or global hot spares
RAID levels supported: RAID 0, 1 (0+1), 3, 5, 10, 30, 50, NRAID, and JBOD
Online expansion by
1. Adding new drives
2. Copying and replacing drives with drives of larger capacity
Automatic background rebuild
Configurable stripe size and write policy per array
Intelligent Drive Handling
* In degraded mode: Skipping irreparable blocks to continue rebuild
* In normal operation: Data block verification and repair
* Task Scheduler: Hands-free Media Scan maintenance
System Components
* 3U-profile RAID enclosure
* Single RAID controller
* 16 drive trays
* Dual redundant power supplies
* 2 hot-swappable, dual-speed fan modules
* Optional battery backup unit (BBU) supported
Management
Java-based GUI RAID manager
Centralized management of multiple arrays over in-band or Ethernet
Event notification: email, LAN broadcast, fax, SMS, MSN, ICQ, or SNMP traps
Host-side SES emulation with pass-through to back-end SES emulation
SNMP 2.0 MIBs with get and set commands
Firmware-embedded utility via LCD keypad or RS-232C port
Drive Interface
Up to 1024 LUNs if sufficiently large memory is used with the proper settings
3.5-inch, 1-inch high 3Gbps SATA-II disk drives
16 hot-swappable drive trays
Automatic bad sector reassignment
Dedicated bandwidth to each connected drive
Host Interface
Auto-negotiate FC-AL, point-to-point, or switched fabric
Concurrent I/O commands
Tagged Command queuing up to 256
Variable stripe size per logical drive
Optimization setting for random or sequential I/Os
Maintenance & Availability
Optional Li-ION battery support
Immediate array availability
Drive roaming, array configuration on drives
Controller voltage and temperature self-diagnostics
Auto Switch cache policy and Auto Shutdown
When a RAID controller detects conditions exceeding preset thresholds, the following actions will be exerted to protect the hardware:
1. Automatically flush cached data and switch the array's caching mode from write-back to write-through
2. Commence an auto shutdown
All environmental thresholds associated with this mechanism are user-configurable and the caching mode changes back to write-back once normal condition is restored.
Physical/Electrical
Interfaces
* 2 SFP sockets, each using a short-wavelength adapter
* 2 audio jacks for RS-232C serial port (38400, n, 8, 1) and UPS support
* RJ-45 Ethernet port
Power Supply
2 redundant, hot-swappable power supplies with PFC
Input: 100 to 240VAC, 47 to 63Hz
Output: +5V, 32A max.; +12V, 32A max.; +3.3V, 30A max.; 460 Watt capacity
Cooling Fan
4 cooling fans in 2 separate modules
Environmental Specifications
Operating temperature: 5 to 40° C
Non-operating temperature: - 40º to 60ºC
Relative humidity: 10 to 95%, non-condensing
Operating altitude: sea level to 10,000ft
Dimensions:
Chassis dimensions without handles: 131H x 482.6W x 504.3D mm
Chassis dimensions with handles: 130H x 445.0W x 488.2D mm
Package dimensions: 423H x 567W x 772D mm
System weight (w/o drives):
Net weight: 28.5kg
Gross weight: 30.5kg
purchase list
last update:
21.05.2012
