EonStor A16U G2421
Article number: 32825
Listed in category: IT Systems / Enterprise Storage Solutions (RAID, SAN, NAS) > EonStor A16U G2421 from brakensiek.de
EonStor A16U-G2421
* Market leading I/O performance
o Sustained RAID5 Read/Write: 515/365 (MB/sec)
* Ultra-high-density, 3U-profile, 16-bay enclosure
* Up to 8TB of storage capacity
* Two (2) SCSI-320 host channels
* Support up to 2GB DDR RAM
* Optional, hot-swappable battery backup unit (BBU)
* Ease of maintenance with host-swappable FRUs
Host-to-Drive Interface Model Form Factor
SCSI-320 to SATA-II A16U-G2421 3U rack-mount
Specifications
RAID
* Multiple arrays configurable with dedicated or global hot spares
* RAID levels supported: RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, NRAID and JBOD (for A16U-G2421-1)
* RAID levels supported: RAID 0, 1 (0+1), 3, 5, 10, 30, 50, NRAID and JBOD (for A16U-G2421)
* Online expansion by:
o Adding new drives
o Copying and replacing drives with drives of larger capacity
* Automatic background rebuilds
* Configurable stripe size and write policy per array
* Intelligent drive handling:
o In degraded mode: skips irreparable blocks to continue rebuild
o In normal operation: data-block verification and repair
Host Interface
* Two (2) SCSI-320 through four (4) VHDCI 68-pin SCSI ports; SCSI-160 backward compatible
* Concurrent I/O commands
* Tagged command queuing up to 256
* Variable stripe size per logical drive
* Optimization setting for random or sequential I/Os
Drive Interface
* Sixteen (16) hot-swappable drive trays that accommodate 1-inch pitch, 3.5-inch SATA-II or SATA-I disk drive
* Automatic bad-sector reassignment
* Dedicated bandwidth to each connected drive
System Components
Single controller configuration provides full RAID functionalities
* One (1) EonStor ® enhanced 3U enclosure
* One (1) RAID controller module
* One (1) 256MB DDR RAM DIMM module (pre-installed on the controller module)
* Two (2), hot-swappable, redundant, 460W power supply units
* Two (2), hot-swappable, redundant, dual-fan cooling modules running in high/low speeds
* Sixteen (16), hot-swappable drive trays
* Two (2) front handles
* Optional battery backup unit (BBU) supported
Management
* Front LCD control panel for setup and configuration
* 10/100 BaseT Ethernet for out-of-band management
* Two (2) COM ports for local access to firmware-embedded utility and UPS connectivity
* Firmware-embedded Java-based RAIDWatch ® GUI manager:
o VT-100 terminal emulation via RS-232C
o Telnet access via onboard Ethernet port
o Cross-platform, remote administration with SSL
o Out-of-band access via Ethernet (GUI-onboard)
o Centralized management to monitor and administer multiple RAID units on one screen
* Configuration client for real-time event notification over Email, Fax, LAN broadcast, SNMP Traps, MSN mess en ger, ICQ, SMS short messages, and the configuration utility screen
* SNMP agent support:
o SNMP trap event notification with plain-text event message (no MIB file required)
o SNMP V2.0 MIB file support with get-and-set commands
Indicators
* Onboard alarm is triggered when one of the following modules fails:
o RAID controller module
o Cooling module
o Power supply unit
o Hard drive
o Optional BBU module
* Module status LED indicators:
o Two (2) per drive tray
o Two (2) per cooling module
o One (1) per power supply unit
o One (1) per optional BBU module
o Three (3) per LCD panel
o Four (4) per RAID controller module
o Two (2) per Ethernet port
* Module failure alert through I2C bus
Infortrend Smart Technologies
Derived from more than ten years experience in RAID storage design, Infortrend's innovative firmware delivers Smart technologies that provide enhanced storage solutions for every customer environment, from small organizations to large enterprises. These technologies enhance I/O processing, drive handling, and system management.
IOSmart
IOSmart allows for the flexible configuration of logical drives, logical volumes and logical partitions and ensures instant RAID availability via background logical drive initialization. Fibre loops' load balancing is provided within the subsystem. The firmware's embedded intelligent algorithms, such as Adaptive Write Policy and Guaranteed Latency I/O, improve sequential write performance and ensure the fast and continuous flow of data.
DrvSmart
The DrvSmart utility provides an easy way to store data while keeping it safe. One of the main DrvSmart functions, Media Scan, retrieves data from degraded or damaged hard drives and handles low quality drives in both the degraded mode and during the rebuild process. Other DrvSmart features include disk cloning, drive roaming, SMART, transparent resetting of non-responsive hard drives, and RAID parity update tracking and recovery.
SysSmart
In addition to RAID protection for the disk drives, Infortrend has introduced Auto Data Protection Mechanisms. These special SysSmart firmware functions ensure data safety by automatically switching to write-through data caching when abnormal subsystem conditions are detected such as a PSU/cooling module failure, low BBU or UPS battery charge, etc.
By using the firmware to monitor and control the enclosure's dual-speed fans, the fan rotation speed is raised to a higher level when critical conditions are detected, e.g., a PSU or fan failure. Fan speed returns to the lower setting when normal operating status is restored.
The ES A16U-G2421-1 can be monitored by variety of utilities and approaches. I 2 C internal serial bus, SAF-TE, and SES are seamlessly integrated into the comprehensive Java-based GUI RAIDWatch Manager. Component status, voltage and temperature readings, and system events are instantly revealed through the manager's graphical interface.
Physical/Electrical
Interfaces
* Four (4) ports in two (2) dual-stacked VHDCI SCSI connectors
* Two (2) COM ports (38400, n, 8, 1)
* One (1) 10/100BaseT Ethernet port
Power Supply Module
Two (2) redundant hot-swappable power supplies with PFC
Input 100VAC at 10A, 240 VAC at 5A with PFC (auto-switching)
47 ~ 63Hz
Output (Maximum output: 460 Watts)
+12.0V 32A max.
+ 5.0V 32A max.
+ 3.3V 30A max.
Dimensions: 248.9(D) x 128(W) x 82.1(H) mm
Cooling Module
Two (2) redundant dual-fan cooling modules
Maximum air flow High speed: 31.78 DFM
Low speed: 20.13 CFM
Dimensions:
263.7(D) x 123.2(W) x 36.4(H) mm
Environmental Specifications
Operating temperature 0° to 40°C
Non-operating temperature - 40º to 60ºC
Relative humidity: 5 ~ 95%, non-condensing
Operating altitude: Operating: 0 ~ 12,000 ft
Non-operating: 0 ~ 40,000 ft
Dimensions
* Chassis without handles: 445(W) x 130(H) x 487(D) mm
* Chassis with handles: 483(W) x 131(H) x 535(D) mm
* Package: 423H x 567W x 772D mm
System Weight
* Net weight: 28kg
* Gross weight: 31kg
* Market leading I/O performance
o Sustained RAID5 Read/Write: 515/365 (MB/sec)
* Ultra-high-density, 3U-profile, 16-bay enclosure
* Up to 8TB of storage capacity
* Two (2) SCSI-320 host channels
* Support up to 2GB DDR RAM
* Optional, hot-swappable battery backup unit (BBU)
* Ease of maintenance with host-swappable FRUs
Host-to-Drive Interface Model Form Factor
SCSI-320 to SATA-II A16U-G2421 3U rack-mount
Specifications
RAID
* Multiple arrays configurable with dedicated or global hot spares
* RAID levels supported: RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, NRAID and JBOD (for A16U-G2421-1)
* RAID levels supported: RAID 0, 1 (0+1), 3, 5, 10, 30, 50, NRAID and JBOD (for A16U-G2421)
* Online expansion by:
o Adding new drives
o Copying and replacing drives with drives of larger capacity
* Automatic background rebuilds
* Configurable stripe size and write policy per array
* Intelligent drive handling:
o In degraded mode: skips irreparable blocks to continue rebuild
o In normal operation: data-block verification and repair
Host Interface
* Two (2) SCSI-320 through four (4) VHDCI 68-pin SCSI ports; SCSI-160 backward compatible
* Concurrent I/O commands
* Tagged command queuing up to 256
* Variable stripe size per logical drive
* Optimization setting for random or sequential I/Os
Drive Interface
* Sixteen (16) hot-swappable drive trays that accommodate 1-inch pitch, 3.5-inch SATA-II or SATA-I disk drive
* Automatic bad-sector reassignment
* Dedicated bandwidth to each connected drive
System Components
Single controller configuration provides full RAID functionalities
* One (1) EonStor ® enhanced 3U enclosure
* One (1) RAID controller module
* One (1) 256MB DDR RAM DIMM module (pre-installed on the controller module)
* Two (2), hot-swappable, redundant, 460W power supply units
* Two (2), hot-swappable, redundant, dual-fan cooling modules running in high/low speeds
* Sixteen (16), hot-swappable drive trays
* Two (2) front handles
* Optional battery backup unit (BBU) supported
Management
* Front LCD control panel for setup and configuration
* 10/100 BaseT Ethernet for out-of-band management
* Two (2) COM ports for local access to firmware-embedded utility and UPS connectivity
* Firmware-embedded Java-based RAIDWatch ® GUI manager:
o VT-100 terminal emulation via RS-232C
o Telnet access via onboard Ethernet port
o Cross-platform, remote administration with SSL
o Out-of-band access via Ethernet (GUI-onboard)
o Centralized management to monitor and administer multiple RAID units on one screen
* Configuration client for real-time event notification over Email, Fax, LAN broadcast, SNMP Traps, MSN mess en ger, ICQ, SMS short messages, and the configuration utility screen
* SNMP agent support:
o SNMP trap event notification with plain-text event message (no MIB file required)
o SNMP V2.0 MIB file support with get-and-set commands
Indicators
* Onboard alarm is triggered when one of the following modules fails:
o RAID controller module
o Cooling module
o Power supply unit
o Hard drive
o Optional BBU module
* Module status LED indicators:
o Two (2) per drive tray
o Two (2) per cooling module
o One (1) per power supply unit
o One (1) per optional BBU module
o Three (3) per LCD panel
o Four (4) per RAID controller module
o Two (2) per Ethernet port
* Module failure alert through I2C bus
Infortrend Smart Technologies
Derived from more than ten years experience in RAID storage design, Infortrend's innovative firmware delivers Smart technologies that provide enhanced storage solutions for every customer environment, from small organizations to large enterprises. These technologies enhance I/O processing, drive handling, and system management.
IOSmart
IOSmart allows for the flexible configuration of logical drives, logical volumes and logical partitions and ensures instant RAID availability via background logical drive initialization. Fibre loops' load balancing is provided within the subsystem. The firmware's embedded intelligent algorithms, such as Adaptive Write Policy and Guaranteed Latency I/O, improve sequential write performance and ensure the fast and continuous flow of data.
DrvSmart
The DrvSmart utility provides an easy way to store data while keeping it safe. One of the main DrvSmart functions, Media Scan, retrieves data from degraded or damaged hard drives and handles low quality drives in both the degraded mode and during the rebuild process. Other DrvSmart features include disk cloning, drive roaming, SMART, transparent resetting of non-responsive hard drives, and RAID parity update tracking and recovery.
SysSmart
In addition to RAID protection for the disk drives, Infortrend has introduced Auto Data Protection Mechanisms. These special SysSmart firmware functions ensure data safety by automatically switching to write-through data caching when abnormal subsystem conditions are detected such as a PSU/cooling module failure, low BBU or UPS battery charge, etc.
By using the firmware to monitor and control the enclosure's dual-speed fans, the fan rotation speed is raised to a higher level when critical conditions are detected, e.g., a PSU or fan failure. Fan speed returns to the lower setting when normal operating status is restored.
The ES A16U-G2421-1 can be monitored by variety of utilities and approaches. I 2 C internal serial bus, SAF-TE, and SES are seamlessly integrated into the comprehensive Java-based GUI RAIDWatch Manager. Component status, voltage and temperature readings, and system events are instantly revealed through the manager's graphical interface.
Physical/Electrical
Interfaces
* Four (4) ports in two (2) dual-stacked VHDCI SCSI connectors
* Two (2) COM ports (38400, n, 8, 1)
* One (1) 10/100BaseT Ethernet port
Power Supply Module
Two (2) redundant hot-swappable power supplies with PFC
Input 100VAC at 10A, 240 VAC at 5A with PFC (auto-switching)
47 ~ 63Hz
Output (Maximum output: 460 Watts)
+12.0V 32A max.
+ 5.0V 32A max.
+ 3.3V 30A max.
Dimensions: 248.9(D) x 128(W) x 82.1(H) mm
Cooling Module
Two (2) redundant dual-fan cooling modules
Maximum air flow High speed: 31.78 DFM
Low speed: 20.13 CFM
Dimensions:
263.7(D) x 123.2(W) x 36.4(H) mm
Environmental Specifications
Operating temperature 0° to 40°C
Non-operating temperature - 40º to 60ºC
Relative humidity: 5 ~ 95%, non-condensing
Operating altitude: Operating: 0 ~ 12,000 ft
Non-operating: 0 ~ 40,000 ft
Dimensions
* Chassis without handles: 445(W) x 130(H) x 487(D) mm
* Chassis with handles: 483(W) x 131(H) x 535(D) mm
* Package: 423H x 567W x 772D mm
System Weight
* Net weight: 28kg
* Gross weight: 31kg
purchase list
last update:
21.05.2012
