Logo SilverFast Logo Logo
Linotype-Hell Linotronic 330 + Laser exchanged + RIP (HQ, RIP50) at additional cost
Article number: 35189
Listed in category: Prepress / Computer To Film / Imagesetter > Linotype-Hell Linotronic 330 + Laser exchanged + RIP (HQ, RIP50) at additional cost from brakensiek.de
Linotype-Hell Linotronic 330 + Laser exchanged + RIP (HQ, RIP50) at additional cost



- Exposure System: Capstan
- Light source: helium-neon laser with emission of 670-680mm
- Resolution: 635; 846; 1270; 1693: 2032; 2540; 3387 dpi
- Max grid frequency at film exposure: up to 80 lines / cm (175 lpi)
- Repeatability about 5μ in size 30 x 30cm
- Output options: positive, negative, right, wrong way
- Materials in rolls: Film, Paper, 0.1 - 0.18 mm at 633 nm
- Capacity of supply cassette max. 60m at 0.10 mm thick photographic material
- Maximum Exposure :: Format 305 x infinity
- Material film widths: 150, 200, 250, 280, and 310 mm
- Dimensions: 75 x 94.5 x 80 cm
- Weight (net): 220 kg
- Interfaces: LI2 x, 2 2 x LI5

Linotype-Hell RIP 50



Linotronic imagesetter for 260/330/560/630 Hercules and Hercules M
System Description: Raster Image Processor in stand-alone tower
3.5 "floppy disk for software maintenance
Input interfaces: RS 232, Centronics, LocalTalk
Ethernet, SCSI for external disk
Outputs: LI2, LI5, SpeedWay
Grid technologies Oiginal PostScript Level 2 Interpreter from Adobe
Control over Output Manager from Mac or PC
Dimensions (W x H x D) 36 x 64 x 55 mm
Weight about 27 kg

Technical Data

Light source: 3mW helium neon gas laser

Exposure system:Rotating polygon mirror

Control:Via the LI 2 and LI 5 interfaces

Ports/interfaces:LI 2 interface, LI 5 interface, power input
Optional: Connection for on-line processor

Output format:

Horinzontal305 mm (12 inch or 72 Pica) maximum scanline length

Vertical:With take-up cassette: 30 m or 100 feet (Maximum length, if using a HeNe laser film of 0.1 mm or 4 mil thickness and 310 mm or 12.2 inch width. In greneral, the vertical format depends on the RIP and front-end system)

With on-line processor connected: variable lengths up to maximum 800 mm or 31.5 inch can be defined according to the instructions of the processor manufacturer.

Photomaterial:Red -sensitive high speed imagesetting materials with maximum sensitivity at 632 nm and high contrast. Materials: polyester-based HN-laser film, HN RC-paper, HN-direct plate-making materials (printing foils)

Photomaterial supply from: Roller material, emulsion inside; light-proof pagaging; wound core diameter 50.4 mm or 2 inches

Requred density:Minimum log D 3; follow the density recommendations of the photomaterial manufacturer and select the corresponding density value on the input panel of the laser imagesetter.

Material thickness: 0.10 mm to 0.19 mm or 4 mil to 7 mil

Material widths: 150 mm, 200 mm, 250 mm, 280 mm and 310 mm
5.9 inch, 7.9 inch, 9.8 inch, 11.0 inch, 12.2 inch

Spot size:20 µm or 0.8 mil

Adressability (Resolution):In vertical and horizontal direction

3387 dpi (1333 pixel/cm)*
2540 dpi (1000 pixel/cm)
2032 dpi (800 pixel/cm)
1693 dpi (666 pixel/cm)
1270 dpi (500 pixel/cm)
846 dpi (333 pixel/cm)
635 dpi (250 pixel/cm)

A PostScript RIP 4 or PostScript RIP 300 with software version 51.8 upwards is requred to achieve all above resolution steps. (The reosultion step marked with * can be used only in LI 2 asynchronous mode with a 16 MHz clock.)

Maximum recorder Speeds:

Speed cm/min.:9.7
Speed inch/min.: 3.8
Resolution dpi:3387
Resolution pixel/cm:1333

Speed cm/min.:17.3
Speed inch/min.: 6.8
Resolution dpi:2540
Resolution pixel/cm:1000

Speed cm/min.:27.1
Speed inch/min.: 10.7
Resolution dpi:2032
Resolution pixel/cm:800

Speed cm/min.:39.0
Speed inch/min.: 15.4
Resolution dpi:1693
Resolution pixel/cm:666

Speed cm/min.:34.7
Speed inch/min.: 13.7
Resolution dpi:1270
Resolution pixel/cm:500

Speed cm/min.:78.0
Speed inch/min.: 30.7
Resolution dpi:846
Resolution pixel/cm:333

Speed cm/min.:69.6
Speed inch/min.: 27.4
Resolution dpi:635
Resolution pixel/cm:250

You may also rent this article for a limited time. Please request an offer. This possibility exists only for companies with good credit ratings.

Spare Parts:
As certified matchpart GmbH (Germany) Distributor we provide some spare Parts. Also we can try to find spareparts for you if you have been unsuccsessful to find them. If you have a demand for spare parts use the e-Mail adress service (at) brakensiek (dot) com for inquiries

This item is without packaging:
Not New Sale according to §7 of our AGB, which can bei downloaded here www.brakensiek.com/AGB.pdf The item is used.

Delivery Service:
At additional cost our Partner Systembau Dortmund GmbH & Co. KG packs and delivers this item .

As matchpart GmbH (Germany) Partner we offer circuit board, Laserhead and Spinner Motor repair service. If you are interested in this service, we need serial number, YOM, sparepartnumber and type of error.

Service Training:
A Service Technician Training is available on request by matchpart GmbH (Germany).

Package Deals welcome:
Please make us an reasonable offer for a package deal.

Trade In/We are looking for machines:
We offer Trade In prices. If you have machines for sale, please offer them to us. You have to cover the transport costs.

Supplies and CRCs:
The machine is sold without suppies and CRCs.

Please ask for supplies.

The manual will be send as PDF and the original one will be shipped at additional cost.

Spareparts are Exchange Parts:
We deliver Spareparts as Exchange Part:
We need the old broken part back, bevore we can ship the new part.

Your contact person: Tim Brakensiek
Ampel gebrauchtprodukt     last update:   24.04.2017

Visit the new marketplace for prepress, press und postpress: www.worldprintmarket.com
Optimize your cash-flow by selling your no longer required machines.

X-Rite IntelliTrax System - automatic spectral color measurement system for sheet, and roll-feed printing units and package-printing units according to PSO for Heidelberg, MAN Roland, KBA, Ryobi, Komori, Wifag, Mitsubishi. In at least 15 seconds you will measure the print control strip and receive a graphic printout of what to change in which zone to meet your deposited standard e.g. PSO.
matchflow adjust

With Matchflow-adjust you can share a pdf-document over the internet for detailed checking and annotation. In this document all project-members (depending on their access-rights) can acquire comments and modifications. By using the "Generated Print Report Button", you generate an new PDF which contains annotation number, username, date, annotation text and type. All comments are saved in a database. So the whole coordination-process is reconstructable at any time. You will save proof and dispatcher costs an maybe need only one final proof. We recommend to insert a flat PDF which can be written from any common workflow system. AGFA Apogee, Heidelberg Prinect, Creo Prinergy, Di Plot, if this function is enabled.

Order your FR1SX Firewire-Adapter offer here.
A CD-ROM with actual SilverFast AI Studio + HDR Demo-Version is included in delivery. Please specify your scanner type. We are sure that only an perfect maintained Linotype Hell/Heidelberg Chromagraph S3300/S3400, Nexscan F4100/F4200, Primescan 7100, 8200, 8400 and Tango/Tango XL sowie Topaz HighEnd scanners provide quality and are able to reach Delta E 1 scales after reprofiling. Therefore we provide spare parts and preventive service. Service contracts are possible. After service we peform an new DIN VDE 701 report.

Dowload and print this article as PDF data sheet: Data Sheet Linotype-Hell Linotronic 330 + Laser exchanged + RIP (HQ, RIP50) at additional cost
Terms and conditions:
Please only contact us via our registration form and only if you are a business person yourself. Every offer is subject to prior sale and includes your acceptance to our terms & conditions Terms and conditions (AGB) All logos and trademarks on this site are the property of their respective owners.

You will always receive an invoice including tax, which can be paid via wire transfer, in advance or cash. If you register on paypal, you may also pay by charging your paypal account with your credit card. If you are an EU member and you have a validated tax number which can be validated here: VIES VAT number validation / MwSt.-Informationsaustauschsystem MIAS) Validierung der MWSt.-Nummer then you pay tax-free. If you are from outside the EU, you can only pay tax-free, if the export is done with the transport company, called 'Schenker'. If you are not using 'Schenker', we cannot guarantee that we will get the export confirmation in time. In that case, you have to pay tax and you get it.

The website was generated by matchflow and the PDF version was released by matchflow-adust: communicate, control, confirm. Matchflow-adjust provides browser-based PDF correction and PDF annotation with web2print features.
Login | Subscribe to Newsletter | Imprint | Terms and Conditions | Contact | Links | Remote Control Win Mac| Stocklist | Purchase List |