Glunz & Jensen InterPlater 66 conventional PlateProcessor
Article number: 39159
Listed in category: Prepress / CTP (Computer To Plate) / Plateprocessors and Punches > Glunz & Jensen InterPlater 66 conventional PlateProcessor from brakensiek.de
Glunz & Jensen InterPlater 66 P CE/90095-1214 Processor
Nicht-Neu
Year of construction 2006
Maximize the performance
The InterPlater develops positive (P-Version) and negative (N-Version) singlesided, offset plates in widths up to 660 mm (26"). By using the standard soft nylon brush, the Aqua Mol roller or the extra scrubbing brush, the InterPlater can handle any printing plate on the market today.
The InterPlater can be installed in less than one hour. The length and height of exit table can be adjusted for operator comfort.
Major Benefits:
High quality
- A unique transport system precisely guides the plates into the developer
- No scratches
- Proven technology
- Dip-tank development, minimized bending of plates
Flexible
- Handles most printing plates on the market
- Develops positive and negative single- sided offset plates
Minimum chemical consumption
- A closed diptank system minimizes chemical consumption and oxidation
- Anti oxidation lids
- Accurate replenishment system, based on processed square meters
User-friendly design
- Automated replenishment system
- Easy to read - control panel
- Easy parameter adjustment
Maintenance and service friendly design
- Automatic self-cleaning of the gum section
- Light-weight, easy cleaning rack modules
- No tools required to remove rollers and bearings
- All rollers, brushes and spray tubes can be removed withaout the use of tools
- Service friendly design
Complies with CE safety standards
UL, c/UL, TÜV, and GOST-R certified
Glunz & Jensen´s Quality Management System meets
DS/EN ISO 9001 standards.
Technische Daten:
InterPlater 66/88
Plate materials Positive and negative single sided offset plates
Processing speed 40-140 cm/min. (16-55"/min.)
Material width, min 10 cm (4")
Material width, max 66/88 cm (26"/34.6")
Material length, min 330 mm (13.0")
Material thickness 0.15 mm (0.006") - 0.4 mm (0.016")
Tank contents, developer 18 l (4.75 US gal) / 24 l (6.34 US gal)
Tank contents, gum Recirculating from container
Adjustable temperature, developer 18-40°C (64.4-104°F) A cooling unit is recommended under certain conditions.
Adjustable temperature, dryer 30-60°C (86-140°F)
Brush speed 40-140 rpm
Filters 1 x 10"
Water supply Tap water, pressure min. 1 bar/15 psi
Water consumption in op. max. 7.0 l/min. (1.85 US gal/min)
Wash Tap water
Diameter of rollers 40 mm (1.6")
Replenishment Automatic
Area replenishment amount 0-500 ml/m2 ± 5% (0-0.132 gal/m2 ± 5%)
Level control Yes
Warm up time max., developer 0.3°C/min. (0.86°F/min.
Power 230 V, 1-phase, 50/60 Hz
Power consumption, max 2.2 kW
Voltage tolerance At 230 V: + 10%, - 15% (208-240 V)
Start Sensor operated
Weight, empty 125/150 kg (276/331 lb)
Approvals UL, c-UL, and GOST-R certified. Complies with CE standards.
Nicht-Neu
Year of construction 2006
Maximize the performance
The InterPlater develops positive (P-Version) and negative (N-Version) singlesided, offset plates in widths up to 660 mm (26"). By using the standard soft nylon brush, the Aqua Mol roller or the extra scrubbing brush, the InterPlater can handle any printing plate on the market today.
The InterPlater can be installed in less than one hour. The length and height of exit table can be adjusted for operator comfort.
Major Benefits:
High quality
- A unique transport system precisely guides the plates into the developer
- No scratches
- Proven technology
- Dip-tank development, minimized bending of plates
Flexible
- Handles most printing plates on the market
- Develops positive and negative single- sided offset plates
Minimum chemical consumption
- A closed diptank system minimizes chemical consumption and oxidation
- Anti oxidation lids
- Accurate replenishment system, based on processed square meters
User-friendly design
- Automated replenishment system
- Easy to read - control panel
- Easy parameter adjustment
Maintenance and service friendly design
- Automatic self-cleaning of the gum section
- Light-weight, easy cleaning rack modules
- No tools required to remove rollers and bearings
- All rollers, brushes and spray tubes can be removed withaout the use of tools
- Service friendly design
Complies with CE safety standards
UL, c/UL, TÜV, and GOST-R certified
Glunz & Jensen´s Quality Management System meets
DS/EN ISO 9001 standards.
Technische Daten:
InterPlater 66/88
Plate materials Positive and negative single sided offset plates
Processing speed 40-140 cm/min. (16-55"/min.)
Material width, min 10 cm (4")
Material width, max 66/88 cm (26"/34.6")
Material length, min 330 mm (13.0")
Material thickness 0.15 mm (0.006") - 0.4 mm (0.016")
Tank contents, developer 18 l (4.75 US gal) / 24 l (6.34 US gal)
Tank contents, gum Recirculating from container
Adjustable temperature, developer 18-40°C (64.4-104°F) A cooling unit is recommended under certain conditions.
Adjustable temperature, dryer 30-60°C (86-140°F)
Brush speed 40-140 rpm
Filters 1 x 10"
Water supply Tap water, pressure min. 1 bar/15 psi
Water consumption in op. max. 7.0 l/min. (1.85 US gal/min)
Wash Tap water
Diameter of rollers 40 mm (1.6")
Replenishment Automatic
Area replenishment amount 0-500 ml/m2 ± 5% (0-0.132 gal/m2 ± 5%)
Level control Yes
Warm up time max., developer 0.3°C/min. (0.86°F/min.
Power 230 V, 1-phase, 50/60 Hz
Power consumption, max 2.2 kW
Voltage tolerance At 230 V: + 10%, - 15% (208-240 V)
Start Sensor operated
Weight, empty 125/150 kg (276/331 lb)
Approvals UL, c-UL, and GOST-R certified. Complies with CE standards.
Contact:
Your contact person: Tim Brakensiek
used products
last update:
07.02.2012
