walimex Deckenschienensystem 4x3m, mit 3 Scheren
Article number: 39213
Listed in category: Cross Media Equipment > walimex Deckenschienensystem 4x3m, mit 3 Scheren from brakensiek.de
walimex Sky Track System 4x3m with 3 stays
New
Additional Information:
The walimex ceiling rail system facilitates the work in photo studio enormous. Stands and cables that were once stumbling blocks to belong to the past. The scissors allow a continuous extension up to max. 200cm, thus standing on the ground, smaller objects can be photographed without any problems. The 5 / 8 inch spigot suitable for all standard studio lights and studio flash. By smooth carriage, you can move easily back and the scissors and thus make no effort in the desired position. The springs are made of stainless steel scissors.
Please note that the ceiling where you install the system of high stability.
Technical data:
Dimensions Ceiling Rail System (LxW) approx 400x300cm
Shear Dimensions (LxWxH) approx 30x10x40cm
Max shear extension approx 200cm
Maximum load scissors 6000g
Connection 5 / 8 inch spigot
Total weight about 24.5 kg
Weight approx 5000g Scissors
Material Metal
New
Additional Information:
The walimex ceiling rail system facilitates the work in photo studio enormous. Stands and cables that were once stumbling blocks to belong to the past. The scissors allow a continuous extension up to max. 200cm, thus standing on the ground, smaller objects can be photographed without any problems. The 5 / 8 inch spigot suitable for all standard studio lights and studio flash. By smooth carriage, you can move easily back and the scissors and thus make no effort in the desired position. The springs are made of stainless steel scissors.
Please note that the ceiling where you install the system of high stability.
Technical data:
Dimensions Ceiling Rail System (LxW) approx 400x300cm
Shear Dimensions (LxWxH) approx 30x10x40cm
Max shear extension approx 200cm
Maximum load scissors 6000g
Connection 5 / 8 inch spigot
Total weight about 24.5 kg
Weight approx 5000g Scissors
Material Metal
Contact:
Your contact person: Tim Brakensiek
new products
last update:
22.05.2012
