i1iSis mit OBC-Modul Automatischer Chart Reader
Article number: 39615
Listed in category: Measurement / Automatic Chart Scanning > i1iSis mit OBC-Modul Automatischer Chart Reader from brakensiek.de
i1iSis withOBC Module Automatic Chart Reader
OBC module: OBC - Optical Brightener Compensation (correction of the influence of optical brighteners)
Through the use of X-Rite OBC solution for printing on paper with
optical brighteners the best possible match between the visual
Impression and the measurements depending on the particular
Lighting condition reached. ICC profiles on the basis of OBC data
created will lead to print without color shifts.
How it works: • expression of the OBC test charts used in the standard workflow, eg
Adobe Acrobat. The test chart is designed specifically for OBC and contains
additional gray balance patches required for the subsequent adjustment of the measured values
are needed. On the test chart is also a barcode for
automatic detection, which also contains all the instructions for use.
• Measurement of the test charts with i1iSis in dual mode (UVcut and UVonly).
This may be established on each field, how much of the reflection of
the ink and which comes from the optical brighteners.
• Generation of OBC Gray Evaluation Chart (gray-evaluation chart) and
Expression. The chart contains four columns with different shades of gray. In the 19
Lines will increase the proportion of each yellow.
• Visual identification of the UV portion of the spectrum of Abmusterungsleuchte.
To this end, OBC-standard cards (gray cards) are used. With the
corresponding card in the appropriate column (light gray to dark gray) of the
Test charts the field searched, which visually provides the best match. In the
Package contains two sets with different gloss level, each with four
OBC-standard cards (gray cards).
• Entering the respective row designation (AS) of the matching
Gray patch in the OBC software.
• Calculation of the adjusted measurement file (characterization data) for the
Use for profile calculation in ProfileMaker or MonacoPROFILER. To
previous solutions are here, the measured values of the entire chart corrected.
• The OBC module is an additional tool for the programs and ProfileMaker5 MonacoPROFILER
OBC module: OBC - Optical Brightener Compensation (correction of the influence of optical brighteners)
Through the use of X-Rite OBC solution for printing on paper with
optical brighteners the best possible match between the visual
Impression and the measurements depending on the particular
Lighting condition reached. ICC profiles on the basis of OBC data
created will lead to print without color shifts.
How it works: • expression of the OBC test charts used in the standard workflow, eg
Adobe Acrobat. The test chart is designed specifically for OBC and contains
additional gray balance patches required for the subsequent adjustment of the measured values
are needed. On the test chart is also a barcode for
automatic detection, which also contains all the instructions for use.
• Measurement of the test charts with i1iSis in dual mode (UVcut and UVonly).
This may be established on each field, how much of the reflection of
the ink and which comes from the optical brighteners.
• Generation of OBC Gray Evaluation Chart (gray-evaluation chart) and
Expression. The chart contains four columns with different shades of gray. In the 19
Lines will increase the proportion of each yellow.
• Visual identification of the UV portion of the spectrum of Abmusterungsleuchte.
To this end, OBC-standard cards (gray cards) are used. With the
corresponding card in the appropriate column (light gray to dark gray) of the
Test charts the field searched, which visually provides the best match. In the
Package contains two sets with different gloss level, each with four
OBC-standard cards (gray cards).
• Entering the respective row designation (AS) of the matching
Gray patch in the OBC software.
• Calculation of the adjusted measurement file (characterization data) for the
Use for profile calculation in ProfileMaker or MonacoPROFILER. To
previous solutions are here, the measured values of the entire chart corrected.
• The OBC module is an additional tool for the programs and ProfileMaker5 MonacoPROFILER
Contact:
Your contact person: Tim Brakensiek
new products
last update:
14.03.2012
