acceptance of an offset printing machine Ra 106-7+L
Article number: 40668
Listed in category: Service / Acceptance and introduction of PSO > acceptance of an offset printing machine Ra 106-7+L from brakensiek.de
1. Typographical check on basis of the bvdm-decrease regulation
The period of the introduction of the pressure machine up to the acceptance should amount at least 6 weeks. In this time the machine should print under practise terms and approach and function of the pressure machine be tested, as well as postadjustments or finishing touches, if inevitably, are carried out by the machine manufacturer.
1.1. Passer
Inquiry of the passport standard divergences for
- systempasser
- deliverypasser (7 pressure works)
with the passport measuring system PEEP III after bvdm default.
1.2. print quality
- Pressure in 7 pressure works with the printing inks black,
Cyan, Magenta, Yellow
- Inquiry of the identity values of sound value increase,
Pushing / duplicating, colour rubbish, according to stencil
bvdm default
1.3. Stripe education
- Pressure the in each case last pressure work with printing ink
Cyan
- Inquiry of the identity value according to bvdm default
- visual stripe judgement after experience values
2. Test terms on the typographical check
Pressure machine: Equipment with typical pressure plates and new ones
To elastic cloths; machine company-warmly, fully functioning and adjusts according to manufacturer's regulation;
Lift heights and machine set data become
takes the minutes.
Machine time: approx. 1 working day
Printing ink: Curve offset's colours after German Institute for Standardization ISO in 2846-1
Printing paper: 135 or 150 g / m²
Space climate: 20 - 25°C, 45 - 60% rel. Dampness
Printing forms: All test forms become as pdf-
Files provided. Please
give in addition the resolution
CtPBelichters with the agency in.
Test printing form 1.1. (Check Passer) - 7 pressure plates
Test printing form 1.2. (Check pressure quality) - 7 pressure plates
Test printing form 1.3. (Check stripe education) - 1 pressure plate
4. Evaluation
Test copies are taken during the attempts by the SID. The evaluation with the suitable measuring facilities occurs in the SID. The results will hand over in the form of a test report.
5. Appointment
Handing over of the test forms as pdf: at the earliest
5 Working days after incoming orders
Realisation: according to the arrangement, at the earliest 10 days
after incoming orders
Evaluation / test report: 4 weeks after printing
The period of the introduction of the pressure machine up to the acceptance should amount at least 6 weeks. In this time the machine should print under practise terms and approach and function of the pressure machine be tested, as well as postadjustments or finishing touches, if inevitably, are carried out by the machine manufacturer.
1.1. Passer
Inquiry of the passport standard divergences for
- systempasser
- deliverypasser (7 pressure works)
with the passport measuring system PEEP III after bvdm default.
1.2. print quality
- Pressure in 7 pressure works with the printing inks black,
Cyan, Magenta, Yellow
- Inquiry of the identity values of sound value increase,
Pushing / duplicating, colour rubbish, according to stencil
bvdm default
1.3. Stripe education
- Pressure the in each case last pressure work with printing ink
Cyan
- Inquiry of the identity value according to bvdm default
- visual stripe judgement after experience values
2. Test terms on the typographical check
Pressure machine: Equipment with typical pressure plates and new ones
To elastic cloths; machine company-warmly, fully functioning and adjusts according to manufacturer's regulation;
Lift heights and machine set data become
takes the minutes.
Machine time: approx. 1 working day
Printing ink: Curve offset's colours after German Institute for Standardization ISO in 2846-1
Printing paper: 135 or 150 g / m²
Space climate: 20 - 25°C, 45 - 60% rel. Dampness
Printing forms: All test forms become as pdf-
Files provided. Please
give in addition the resolution
CtPBelichters with the agency in.
Test printing form 1.1. (Check Passer) - 7 pressure plates
Test printing form 1.2. (Check pressure quality) - 7 pressure plates
Test printing form 1.3. (Check stripe education) - 1 pressure plate
4. Evaluation
Test copies are taken during the attempts by the SID. The evaluation with the suitable measuring facilities occurs in the SID. The results will hand over in the form of a test report.
5. Appointment
Handing over of the test forms as pdf: at the earliest
5 Working days after incoming orders
Realisation: according to the arrangement, at the earliest 10 days
after incoming orders
Evaluation / test report: 4 weeks after printing
Contact:
Your contact person: Tim Brakensiek
services
last update:
22.05.2012
