Logo SilverFast Logo Logo rss


 
Stocklist, 12.10.2017

This Stocklist in german [please click]

Page 1 from 51
11011 GBC Eagle 110 Heiß-/Kaltlaminator

GBC Eagle 110 hot cold laminator


LAMINATOR HOT and COLD for 220 V, good state

Laminate hot and cold on both sides of the role, for large format pressure, maps, plans, even signs or cardboards to 6 mm of strength go through.

Very robust device, up to 150 degrees of temperature, 6 speed steps, rollable. The trade name GBC speaks for itself.
Versatile 40" freestanding lamination, encapsulation and mounting of digital inkjet output using thermal films or pressure sensitive (PSA) films. Excellent entry-level unit to complement 38" inkjet printers.
Exclusive preset temp and speed controls for quick setups
Mounting to 3/16" thick
Rewind to accommodate PSA release liners
Silicone heat rollers for quality seal without scratching
Moves easily on its own stand with rollers. Speed: 1.5 fpm-5 fpm (45.7cm-152cm)
Max Roll OD 5 "
Weight: 69kg
Voltage: 220V, 50/60 Hz, 15 amp
Safety standards: UL, CE, CSA Listed

Not-New according to our terms of service (AGB)







Delivery Service:
At additional cost our Partner Systembau Dortmund GmbH & Co. KG packs and delivers this item .


Repair:
As matchpart GmbH (Germany) Partner we offer circuit board, Laserhead and Spinner Motor repair service. If you are interested in this service, we need serial number, YOM, sparepartnumber and type of error.


Trade In/We are looking for machines:
We offer Trade In prices. If you have machines for sale, please offer them to us. You have to cover the transport costs.


Other matching items:
We have other matching items for you, if you use the "search" button on our homepage.





Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20566 IDEAL 4850-95 Schneidemaschine

IDEAL 4850-95 Electric Guillotines


POWER GUILLOTINE WITH AUTOMATIC CLAMP

Economical and comfortable cutting is guaranteed with this power guillotine with electro-mechanical blade drive and automatic clamp. Precise gauges and the optical cutting line allow accurate cutting.

TECHNICAL DETAILS AND FEATURES:
Electro-mechanical blade and clamp drive. Automatic clamping system, guided on both sides, clamp can be lowered or raised independently from blade. Spindle guided backgauge with hand crank for precise positioning. Measuring scale (mm/inches), located on front table. Optical cutting line. Two side lays each on front and rear tables. Solid steel blade carrier and adjustable blade guides. Adjustable backgauge with narrow separations and plastic gliders. High quality blade made from “Solingen steel”. Complete with stand and storage shelf.

SAFETY FEATURES:
Safety guards on front and rear tables. Patented IDEAL safety drive. Electronically controlled true two-hand operation. Automatic blade return. Disc brake for instant blade stop. Main switch, safety lock with key. 24 Volt controls (low voltage). Blade changing device with covered cutting edge. Blade depth adjustment from the outside of the machine. Cutting aid for aligning the paper. Safety tested by major independent safety laboratories and complies with the European “CE” standards.

Measurements. H 1230 x W 755 x H 970 mm
Weight: 209 kg
Power supply: 230 Volt / 50Hz / 1,42 kW








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20567 IDEAL 4850-95 EP Schneidemaschine

IDEAL 4850-95 EP cutter

Pro's pile cutter with 47.5-cm cut length. The electric knife impulse, the automatic pressure, the modern "EP" control for the electrically pursued back poster, the measure-direct input (prefix) over ten keyboard and the digital dimension announcement the work routines accelerate and permit rational reaping.
Completely with underframe and paper filing ground.

Programmable EP's control for 9 programmes programmes with 9 programme steps (up to 9 chain masses can be stored away as a program step)
Memory key for chain cuts
Electronic handwheel at infinitely variable regulable speed for manual back poster-micro-adjustment
Automatic set function for authoritative measure
Optical Schnittandeuter
Security device on front table and back table

Cut length: 475 mm
Cut height: 80 mm
Einlegetiefe: 450 mm
Rest cut: 35 mm

Connected loads: 230 V / 50 hertz / 1.52 kW

measure: H 1,230 mm x B 755 x T 970 mm
Weight: 215 kg








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20577 IDEAL 7228-06 LT Schneidemaschine, Neu

IDEALLY in 7228-06 cutter LT, new

Pro's batch tailor with hydraulic pressure

Cut length 720 mm
Application height 80 / 781 mm
Einlegetiefe 720 mm
Rest cut 20 / 901 mm
Mains connection 400 V / 50 hertz / 3 ~
Engine power
(Nominal admission)
Knife impulse 1.5 kW
Saddle impulse 0.1 kW
Pressdruck MIN. 250 daN
Max. in 2000 daN
Mass (H x B x T) in 1335 in X 1305/2100, 2 in X 1500/1600 2 mm
Weight 620 kg

MACHINE EQUIPMENT

electric-mechanical knife impulse
hydraulic impulse for Pressbalken
infinitely variable of adjustable Pressdruck (250-2000 daN) with optical announcement about light-emitting diodes
puttable Pressbalkenabdeckung with optical announcement
electric-mechanical back poster impulse with precision spindle (speed 53 mm / p.)
serially with aerial table (air nozzles on front table and back table)
Foot pedal to the prepressing or as mechanical Schnittandeuter
optical Schnittandeuter with light-emitting diodes (LEDs)
High-grade steel tabletops on front table and additional tables
high-quality HSS knife from „Solinger of knife steel"
material-careful swinging cut
Full steel knife bearer, on both sides controlled and adjustable
Knife draught adjustment
Additional tables (on the left and on the right) with high-grade steel tabletops as accessories available

SECURITY EQUIPMENT

serially with light barrier in the field of work
clear security cover on the back table
patented ideal security impulse
2 hand cut release with simultaneousness control and Wiederholsperre
autom. Knife and Pressbalken return from every position
Main switch and security castle with key
Knife change-device with covered knife edge
24-volt control
Batch corner to the Glattstoßen of paper piles
"GS" check, corresponds to the accident prevention regulations and security regulations of the professional association as well as the European "CE" standard

BACK POSTER PRICE INCREASE MODULE

40 programmes with 36 steps
Chain measure programming from up to 9 chain masses as a program step
automatic program expiry – with cut supervision with programme and Memorybetrieb
Dimension direct input over ten keyboard
3 memory keys for festival mass (freely programmable)
Digital dimension announcement with 1/10 mm of announcement exactness
"Set" function for authoritative measure
electronic handwheel for manual back poster micro-adjustment with infinitely variable speed regulation
Pressure tracer for saddle quick adjustment (forward and backward)
automatic dimension correction by back poster movement
Memory company for chain cuts (by keystroke), in addition, automatic Memory
Paper output function "EJECT", with and without program company
extinguish ("DELETE") and insert ("INSERT") from program steps possibly
integrated calculator (four basic arithmetical operations)
Selfdiagnosis system with mistake announcement in the display
switchable mm / inches (duty)










Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

31315 Leuchttisch/ Schneidemaschine

Luminous table / cutter black, metal case, illuminated working surface

Not Anew

Type: 640-1
B x H x T: 85 cm x 12 cm x 44 cm








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

32956 IDEAL 8330 PROFESSIONELLES, VARIABLES FALZEN BIS A3

IDEALLY IN 8330

PROFESSIONAL, VARIABLE FOLDS TO A3

Automatic folding machine for professional, exact folds in the office. An easy manual setting of the fold positions for
Easy fold, miscellaneous folding, zigzag fold, gatefold or double fold.

Final disconnection automatically with optical and acoustic signal. Paper sputum with tape display and 3-fold of adjustable paper sputum role. LED-Disply with 4-figure counter for addition (complete counter) or subtraction (prefix counter). Friction-Papierführsystem with three elastic roles. Manual setting of the fold positions more than two adjustable posters in the fold pockets. Automatic mistakes and paper rope's announcement (optically about LED display and acoustically. Hinged Zuführtisch for up to 500 sheets of paper with two adjustable side posters. Two additional posters with leading roles for big formats.

Paper format: German Institute for Standardization A6 to German Institute for Standardization A3

Paper quality: 45 - 140 g/m ² (to 210 g/m ² with easy fold)

Fold capacity: up to 8,000 sheets per hour (with A4 easy fold)

Colour: light grey

Stream connection: 220 - 240 V / 50 hertz / 61 W

Dimensions in the working condition: 520 x 820 x 530 mm (HxBxT)

Dimensions in the rest state: 520 x 660 x 530 mm (HxBxT)

Weight: 27 kg








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34541 IDEAL 5221-05 EP DIGICUT

IDEAL 5221-05 EP DIGICUT

With the completely new developed model IDEAL 5221-05 EP IDEAL DIGITCUT offers a guillotine with an average length of 520 mm to the economic, convenient and flexible cutting in digital printing. He offers through the electro-mechanical blade drive, an electrically powered, fully programmable backgauge, hydraulic clamp drive with infinitely adjustable clamping pressure and a foot pedal for pre-clamping a particularly professional ease. Uses for this new machine are due to the high accuracy of cut, the operator safety and good Preis-/Leistungs-Verhältnisses also for the print finishing printing in the office area, in-house print shops, small print shops or copy shops.

Cutting length: 520 mm

Stack height: 80 mm

Electronic cut-timer: about operator

Clamp on pedal: yes

Adjustable Pressure: Yes








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

35227 Neolt Trim Elektro 150

Neolt Electro Trim 150

Non-new

ELECTRIC TRIM
Electric trimmer with rotating blade in hardened steel, mounted on a sliding tube. Fixed blade in painted stainless steel, mounted on a cutting plane. Retrieval tray for trimmings included.

Provided with lamp over cutting area. Metallic components epoxydic powder coated, color gray RAL 7035. Support in steel tubes with adjustable feet to Ensure easy leveling. Accessory: roll-holder.


Electric Trim 150:

Cutting length: 150 cm
Cutting thikness: 0.8 mm
. Length man / elec:. 174/197 cm
. Depth man / electr. 41/43








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

42262 Stapelschneider IDEAL 7228-06 LT

PROGRAMMABLE POWER GUILLOTINEWITH HYDRAULIC CLAMP AND PROFESSIONAL FEATURES

720 mm cutting length | electro-mechanical blade drive | hydraulic clamp drive | clamping pressure infinitely adjustable (min. 250 daN, max. 2000 daN) with optical indicator | air table on front and rear table as standard equipment | foot pedal for pre-clamping plus cutting line indicator | snap-in false clamp plate with optical indicator for delicate work | electro-mechanical backgauge drive with precision spindle for exact positioning (backgauge speed: 53 mm/sec.) | fully programmable backgauge control module | electronic hand wheel for manual backgauge positioning with infinitely variable speed control | solid steel blade carrier with adjustable guide plates on both sides | cutting blade made of high-quality HSS “Solingen steel” | swing cut for more cutting precision | optical cutting line indicator with bright and durable LEDs | durable stainless steel working surface for front and side tables | set of side tables (left and right) available at an extra cost

SCS (Safety Cutting System):
Light beam safety curtain to secure the working area on the front table; transparent safety cover on the rear table; main switch and safety lock with key; electronically controlled true two-hand operation; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade and clamp return from every position; disc brake for instant blade stop; blade changing device with covered cutting edge; blade depth adjustment from the outside of the machine; easy blade change from the front of the machine without removing covers.

ELECTRONIC CONTROL MODULE FOR THE POWER BACKGAUGE
Digital display for measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch) | 10-button key pad for pre-setting of measurement | memory key for repeat cuts (manual) and additional automatic memory | three programmable keys for quick setting of frequently needed measurements | professional control module for storing 99 programs with up to 99 steps each (program runs automatically – with electronic cutting monitor in the program and memory mode) | up to 9 repeat cuts can be integrated into a program as one single program step | paper EJECT function with and without program mode (advancing programmable) | DELETE and INSERT mode for correcting and modifying programs | automatic measuring correction in case of backgauge displacement | push buttons for fast backgauge movement (forward and reverse) | electronic hand wheel for manual backgauge positioning with infinitely variable speed control (from very slow to very fast) | integrated calculator | “Set“ function key for reference measurement | self-diagnostic system with error indication on display

Power supply: 400 V/50Hz/3~(three phase, other voltages available)
Motor performance (input capacity): blade drive 1.5 kW, backgauge drive 0.1 kW
Dimensions (HxWxD): 1335 x 1305 x 1510 mm
Dimensions with side tables (W x D): 2100 x 1600 mm
Weight: 620 kg
Colour: pearl grey

Cutting length (mm) 720
Cutting height (mm) 80
Table depth (mm) 720
Narrow cut (mm) 20/90*







Spare Parts:
As certified matchpart GmbH (Germany) Distributor we provide some spare Parts. Also we can try to find spareparts for you if you have been unsuccsessful to find them. If you have a demand for spare parts use the e-Mail adress service (at) brakensiek (dot) com for inquiries



Delivery Service:
At additional cost our Partner Systembau Dortmund GmbH & Co. KG packs and delivers this item .


Repair:
As matchpart GmbH (Germany) Partner we offer circuit board, Laserhead and Spinner Motor repair service. If you are interested in this service, we need serial number, YOM, sparepartnumber and type of error.


Service Training:
A Service Technician Training is available on request by matchpart GmbH (Germany).


Package Deals welcome:
Please make us an reasonable offer for a package deal.


Trade In/We are looking for machines:
We offer Trade In prices. If you have machines for sale, please offer them to us. You have to cover the transport costs.


Supplies:
Please ask for supplies.


Manuals:
The manual will be send as PDF and the original one will be shipped at additional cost.


Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

44601 Polar 78 ES ab Bj. 2000 gesucht mit Rüttler, Stapellifter

Polar 78 ES ab Bj. 2000 gesucht mit Rüttler, Stapellifter








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

44926 Suche eine guillotines POLAR 78 X (oder XT), Alter 2007+ und POLAR 66

Looking for guillotines POLAR 78 X (or XT), age 2007+ and POLAR 66







Trade In/We are looking for machines:
We offer Trade In prices. If you have machines for sale, please offer them to us. You have to cover the transport costs.


Purchase and Dismantling:
Please offer us your surplus equipment for purchase. Use the mailadress purchase (at) brakensiek (dot) com
Our partner Systembau Dortmund GmbH & Co. KG can dismantle the goods and transport them to us. They are specialists in that and have own all risk insurrance. Our Equipment is seller owned.


Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

44968 POLAR 115 X/XT Autotrim, ca. Baujahr 2005

POLAR 115 X/XT Autotrim, ca. year 2005







Information for buyers:
This item is sold. You find other items on our website. Please use the search button on our website. Our offers are changing daily.


Other matching items:
We have other matching items for you, if you use the "search" button on our homepage.


Spareparts are Exchange Parts:
We deliver Spareparts as Exchange Part:
We need the old broken part back, bevore we can ship the new part.



Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

44974 polar -mohr Standard 115 Altgerät

polar -mohr standard 115 old machine








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

44977 Wir verkaufen eine Wholenberg Guillotine Typ 90 bj 1982

We sell one wholenberg quillotine type 90 year 1982








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

44980 "ITO" PAPER CUTTER MODEL : CRC82SX

"ITO" PAPER CUTTER MODEL : CRC82SX








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

46776 Neolt Electro Foam Trim Plus 310

Neolt Electro Foam Trim Plus 310

- Electric board cutter for sheet and foamed materials up to 30 mm thickness
- Fixed blade for easy change
- Dust free cutting

Materials
- Kappa ® up to 30 mm
- Forex ® up to 10 mm
- Kömacell ® up to 8 mm

Max. material thickness
30 mm

Max. cutting length
310 cm

Dimensions (LxWxH) in cm
310 x 372 x 375

Weight
150 kg

Power Supply
230 V/50 Hz - 110 V/60 Hz








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

47088 KEENCUT Max Cutter Bar - Großformat Universalschneidegerät - 350cm

KEENCUT Max Cutter Bar - Large Format Cutter Bar

Not-New

Length: 350cm - 140 inch


If the requirement is for super-wide format cutting then the unique and rigid profile of the Keencut MAX will ensure accurate cutting of materials up to 5 metres in width. Available in three sizes from 4.0 metres the unique Keencut MAX offers the only precise way to cut large format display materials up to 5 metres wide and is guaranteed straight to 2.0mm (1:2500) over its full length.

The Keencut MAX can be used as a portable unit or located on an existing work table using the Keencut optional surface mounted Lift & Hold system. Combined with the Keencut Big Bench a complete cutting table and workstation can be created in any workshop.

The Max uses utility knife blades and features a blade depth adjustment and a spring-loaded blade ejector as standard. The utility blades will cut to a depth of 10mm (0.4”). the patented linear bearings have been tested under load for 1600km (1000 miles) and carry a 20 year guarantee. Full length silicon rubber grip strips ensure all work is clamped when cutting and also protect the surface of the material being cut.








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

48360 Kieper Folienschneidemaschine

Kieper Film-cutting-machine

manufacturer: Kieper Rationalisierungstechnik für die grafische Industrie








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49477 Polar 115










Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49500 Polar 115 EM Monitor

Polar 115 EM Monitor

Not-New

Manufacturer: Polar
Model: 115 EM Monitor
Year: 1994
Width: 1150 mm.

Specification:
- Jogger with air removal roller
- Lift
- Transomat down stacker

Serial number: 6431923
Condition: Good









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49504 Polar 115 EMC

Polar 115 EMC

Not-New according to our terms of service (AGB)

Model
115 EMC

Manufacturer
Polar

Year of man.
1983

Serial No
.
5331200

Equipment
Light barrier, Lift, Airtable









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49731 Planschneider IDEAL 7228-90

Guillotine IDEAL 7228-90 with Sidetables

YOM 1992

Das Gerät wurde optisch aufgearbeitet.









Spare Parts:
As certified matchpart GmbH (Germany) Distributor we provide some spare Parts. Also we can try to find spareparts for you if you have been unsuccsessful to find them. If you have a demand for spare parts use the e-Mail adress service (at) brakensiek (dot) com for inquiries



This item is without packaging:
Not New Sale according to §7 of our AGB, which can bei downloaded here www.brakensiek.com/AGB.pdf The item is used.


Delivery Service:
At additional cost our Partner Systembau Dortmund GmbH & Co. KG packs and delivers this item .


Repair:
As matchpart GmbH (Germany) Partner we offer circuit board, Laserhead and Spinner Motor repair service. If you are interested in this service, we need serial number, YOM, sparepartnumber and type of error.


Trade In/We are looking for machines:
We offer Trade In prices. If you have machines for sale, please offer them to us. You have to cover the transport costs.


Manuals:
The manual will be send as PDF and the original one will be shipped at additional cost.


Other matching items:
We have other matching items for you, if you use the "search" button on our homepage.


Purchase and Dismantling:
Please offer us your surplus equipment for purchase. Use the mailadress purchase (at) brakensiek (dot) com
Our partner Systembau Dortmund GmbH & Co. KG can dismantle the goods and transport them to us. They are specialists in that and have own all risk insurrance. Our Equipment is seller owned.








Payment:
only wire transfer, no paypal


Translation:
If parties communicate in any other language, the German wording shall still prevail.
The German version of these terms and conditions has precedence over any foreign language versions and is binding in case of doubt.


Limited groups of buyers
This offer is for machine dealers outside the EUR.


Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49856 Neolt MANUAL TRIM 100

Neolt MANUAL TRIM 100

Cutting Width: 100 cm
Material Thickness: up to 0,8 mm


This solid, manual cutter is ideal for cutting of blueprints, paper and foils, drawings, plans, photographs, posters, and much more.

Due to the self-sharpening circular blade and through the automatic clamp for cutting material, you always get perfect, clean cuts.

Table light gray
Base profile steel pipe incl. paper collecting tray

The cutting edge lighting and the roll holder is optional on all manual machines.






Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49857 Neolt MANUAL TRIM 150

Neolt MANUAL TRIM 150

Cutting Width: 150 cm
Material Thickness: up to 0,8 mm


This solid, manual cutter is ideal for cutting of blueprints, paper and foils, drawings, plans, photographs, posters, and much more.

Due to the self-sharpening circular blade and through the automatic clamp for cutting material, you always get perfect, clean cuts.

Table light gray
Base profile steel pipe incl. paper collecting tray

The cutting edge lighting and the roll holder is optional on all manual machines.






Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49858 Neolt MANUAL TRIM 200

Neolt MANUAL TRIM 200

Cutting Width: 200 cm
Material Thickness: up to 0,8 mm


This solid, manual cutter is ideal for cutting of blueprints, paper and foils, drawings, plans, photographs, posters, and much more.

Due to the self-sharpening circular blade and through the automatic clamp for cutting material, you always get perfect, clean cuts.

Table light gray
Base profile steel pipe incl. paper collecting tray

The cutting edge lighting and the roll holder is optional on all manual machines.






Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49859 Neolt MANUAL TRIM 250

Neolt MANUAL TRIM 250

Cutting Width: 250 cm
Material Thickness: up to 0,6 mm


This solid, manual cutter is ideal for cutting of blueprints, paper and foils, drawings, plans, photographs, posters, and much more.

Due to the self-sharpening circular blade and through the automatic clamp for cutting material, you always get perfect, clean cuts.

Table light gray
Base profile steel pipe incl. paper collecting tray

The cutting edge lighting and the roll holder is optional on all manual machines.






Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49861 Neolt ELEKTRO TRIM 100

Neolt ELEKTRO TRIM 100

Cutting Width: 100 cm
Material Thickness: up to 0,8 mm


Electric trimmer with self-sharpening rotating circular blade and automatic clamping force of the cutting material.
The cutting process is triggered by hand-taskbar or foot pedal.

A removable Plexiglas cover guarantees absolute reliability.
The built-in lighting system facilitates the cutting.

Table light gray
Base profile steel pipe incl. paper collecting tray






Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49862 Neolt ELEKTRO TRIM 150

Neolt ELEKTRO TRIM 150

Cutting Width: 150 cm
Material Thickness: up to 0,8 mm


Electric trimmer with self-sharpening rotating circular blade and automatic clamping force of the cutting material.
The cutting process is triggered by hand-taskbar or foot pedal.

A removable Plexiglas cover guarantees absolute reliability.
The built-in lighting system facilitates the cutting.

Table light gray
Base profile steel pipe incl. paper collecting tray






Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49863 Neolt ELEKTRO TRIM 200

Neolt ELEKTRO TRIM 200

Cutting Width: 200 cm
Material Thickness: up to 0,8 mm


Electric trimmer with self-sharpening rotating circular blade and automatic clamping force of the cutting material.
The cutting process is triggered by hand-taskbar or foot pedal.

A removable Plexiglas cover guarantees absolute reliability.
The built-in lighting system facilitates the cutting.

Table light gray
Base profile steel pipe incl. paper collecting tray






Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49864 Neolt ELEKTRO TRIM 250

Neolt ELEKTRO TRIM 250

Cutting Width: 250 cm
Material Thickness: up to 0,6 mm


Electric trimmer with self-sharpening rotating circular blade and automatic clamping force of the cutting material.
The cutting process is triggered by hand-taskbar or foot pedal.

A removable Plexiglas cover guarantees absolute reliability.
The built-in lighting system facilitates the cutting.

Table light gray
Base profile steel pipe incl. paper collecting tray






Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49866 Neolt MANUAL POWER TRIM PLUS 105

Neolt MANUAL POWER TRIM PLUS 105

Cutting Width: 105 cm
Material Thickness: up to 2,0 mm


This machines is ideal for cutting large format documents. Because of the square-cutting-head-guide paper can be cut by up to two millimeters thick.

POWER TRIM PLUS is specially designed for cutting laminated goods, but also cut large Plotts and technical drawings with excellent quality and speed.

All machines are equipped with a self-sharpening circular blade, and an fixing bar for automatic pressing of the material.

Table
light gray
Base profile steel pipe incl. paper collecting tray

The cutting edge lighting and the roll holder is optional on all manual machines.







Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49867 Neolt MANUAL POWER TRIM PLUS 165

Neolt MANUAL POWER TRIM PLUS 165

Cutting Width: 165 cm
Material Thickness: up to 2,0 mm


This machines is ideal for cutting large format documents. Because of the square-cutting-head-guide paper can be cut by up to two millimeters thick.

POWER TRIM PLUS is specially designed for cutting laminated goods, but also cut large Plotts and technical drawings with excellent quality and speed.

All machines are equipped with a self-sharpening circular blade, and an fixing bar for automatic pressing of the material.

Table
light gray
Base profile steel pipe incl. paper collecting tray

The cutting edge lighting and the roll holder is optional on all manual machines.







Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49868 Neolt MANUAL POWER TRIM PLUS 210

Neolt MANUAL POWER TRIM PLUS 210

Cutting Width: 210 cm
Material Thickness: up to 2,0 mm


This machines is ideal for cutting large format documents. Because of the square-cutting-head-guide paper can be cut by up to two millimeters thick.

POWER TRIM PLUS is specially designed for cutting laminated goods, but also cut large Plotts and technical drawings with excellent quality and speed.

All machines are equipped with a self-sharpening circular blade, and an fixing bar for automatic pressing of the material.

Table
light gray
Base profile steel pipe incl. paper collecting tray

The cutting edge lighting and the roll holder is optional on all manual machines.







Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49869 Neolt MANUAL POWER TRIM PLUS 250

Neolt MANUAL POWER TRIM PLUS 250

Cutting Width: 250 cm
Material Thickness: up to 2,0 mm


This machines is ideal for cutting large format documents. Because of the square-cutting-head-guide paper can be cut by up to two millimeters thick.

POWER TRIM PLUS is specially designed for cutting laminated goods, but also cut large Plotts and technical drawings with excellent quality and speed.

All machines are equipped with a self-sharpening circular blade, and an fixing bar for automatic pressing of the material.

Table
light gray
Base profile steel pipe incl. paper collecting tray

The cutting edge lighting and the roll holder is optional on all manual machines.







Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49871 Neolt ELEKTRO POWER TRIM PLUS 165

Neolt ELEKTRO POWER TRIM PLUS 165

Cutting Width: 165 cm
Material Thickness: up to 2,0 mm


For convenient working due to an electrical cutting head and drive for paper thickness up to 2.0 mm.

The cutting operation can be triggered using hand-taskbar or foot-switch.
With a maximum working width of 360 cm, the ELECTRIC POWER TRIM PLUS is suitable for the cutting of extremely large Plotts, posters, laminates or films.

Table
light gray
Base profile steel pipe incl. paper collecting tray

The cutting edge lighting is already included and the roll holder and fixing bar are optional.







Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49872 Neolt ELEKTRO POWER TRIM PLUS 210

Neolt ELEKTRO POWER TRIM PLUS 210

Cutting Width: 210 cm
Material Thickness: up to 2,0 mm


For convenient working due to an electrical cutting head and drive for paper thickness up to 2.0 mm.

The cutting operation can be triggered using hand-taskbar or foot-switch.
With a maximum working width of 360 cm, the ELECTRIC POWER TRIM PLUS is suitable for the cutting of extremely large Plotts, posters, laminates or films.

Table
light gray
Base profile steel pipe incl. paper collecting tray

The cutting edge lighting is already included and the roll holder and fixing bar are optional.







Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49873 Neolt ELEKTRO POWER TRIM PLUS 250

Neolt ELEKTRO POWER TRIM PLUS 250

Cutting Width: 250 cm
Material Thickness: up to 1,6 mm


For convenient working due to an electrical cutting head and drive for paper thickness up to 2.0 mm.

The cutting operation can be triggered using hand-taskbar or foot-switch.
With a maximum working width of 360 cm, the ELECTRIC POWER TRIM PLUS is suitable for the cutting of extremely large Plotts, posters, laminates or films.

Table
light gray
Base profile steel pipe incl. paper collecting tray

The cutting edge lighting is already included and the roll holder and fixing bar are optional.







Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49874 Neolt ELEKTRO POWER TRIM PLUS 300 inkl. Fixing Bar

Neolt ELEKTRO POWER TRIM PLUS 300 incl. Fixing Bar

Cutting Width: 300 cm
Material Thickness: up to 1,6 mm


For convenient working due to an electrical cutting head and drive for paper thickness up to 2.0 mm.

The cutting operation can be triggered using hand-taskbar or foot-switch.
With a maximum working width of 360 cm, the ELECTRIC POWER TRIM PLUS is suitable for the cutting of extremely large Plotts, posters, laminates or films.

Table
light gray
Base profile steel pipe incl. paper collecting tray

The cutting edge lighting is already included and the roll holder and fixing bar are optional.







Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

49875 Neolt ELEKTRO POWER TRIM PLUS 360 inkl. Fixing Bar

Neolt ELEKTRO POWER TRIM PLUS 360 incl. Fixing Bar

Cutting Width: 360 cm
Material Thickness: up to 1,6 mm


For convenient working due to an electrical cutting head and drive for paper thickness up to 2.0 mm.

The cutting operation can be triggered using hand-taskbar or foot-switch.
With a maximum working width of 360 cm, the ELECTRIC POWER TRIM PLUS is suitable for the cutting of extremely large Plotts, posters, laminates or films.

Table
light gray
Base profile steel pipe incl. paper collecting tray

The cutting edge lighting is already included and the roll holder and fixing bar are optional.







Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

11330 Digital Alpha-Server 4000 - Dieser hat einen Prozessor mit 400 Mhz und ein Barco Crescend 42 Waverly Board und ein Barco Halqeuin RIP

Digital Alpha-Server 4000 with Barco Crescend 42 Waverly Board and a Barco Halqeuin RIP



Non-new

General Technical Data from the Website :

Efficient server systems of optimum use performance

Their expanding company must master numerous challenges - for example, the free from problems migration of available systems, the efficient support of the growing number of uses or the fulfilment quite different of operational demands. The alpha servers in 4000 and 4100 from DIGITALLY fulfil your today's claims and offer at the same time adaptable support for your future growth need.

From the first sight

- Unprecedented achievement and big growth elbowroom thanks to 64 bits of alpha technology from DIGITALLY.
- VLM64 technology (Very Generous Memory) offers capacity and achievement to the support of extremely complicated data bank uses.
- Maximum in I/O-Skalierbarkeit and investment protection thanks to 64-bit PCI technology of the next generation.
- Choice from three operating systems guarantees optimum flexibility and use migration: DIGITALLY UNIX, Microsoft Windows NT or OpenVMS
- Innovative configuration flexibility with Systemeinschub design and UltraSCSI StorageWorks from DIGITALLY.
- The highest reliability and availability which are supported with a three-year-old guarantee and a service organisation by world class format

Configurations
Max Hauptspeicher for 4000 4 GB 4 GB 4 GB
Max Hauptspeicher for 4100 8 GB 8 GB 8 GB
Maximum record capacity
(in the case / Whole) state case: 190 GB/MORE than 15 TB
Cupboard case: 510 GB/MORE than 15 TB
Max I/O-Bandbreite 500 MB/PAGES (1 GB/PAGE with I/O enlargement)
I/O lowest. (Max-Konf).
Alpha server in 4000
Alpha server in 4100 8-16 64-bit PCI slots (incl. 3 common PCI/EISA slots)
8 64-bit PCI slots (incl. 3 common PCI/EISA slots),
2 64-bit PCI canals

--------------------------------------------------------------------------------

Standard features
1,44-mb floppy disk drive, CD-ROM disk drive, 10/100-MBit Ethernet controller, UltraSCSI controller, integral SCSI-2 coach FNSE for change media (CD-ROM and tape), S3 trio-graphics adaptor, 2 serial interfaces, 1 parallel interface, keyboard and mouse, integral Remote system console, operating system licence and customer documentation, Internet software, server management software

--------------------------------------------------------------------------------

Reliability / High availability
OpenVMS cluster Ethernet, DSSI, FDDI, SCSI, CI
UNIX cluster (Digitally UNIX) TruCluster Available server, TruCluster Production server, In parallel software Environment (PCI-Memory Channel-Interconnect)
DIGITALLY Of cluster for Windows NT Becoming supports
High-availability signs system management software DIGITALLY ServerWORKS, Auto-Reboot, temperature management, optional redundant stream system, RAID, Platten-Hotswap, Speicher-Failover, ECC main storage, ECC-Cache, system coach ECC, SMP-CPU-Failover, Fehlerprotokollierung, power UPS management software, optional electricity supply free of interruption (USV).
Also with a CAB several systems, several stream springs, mass memories with dual port
Mass memory UltraSCSI StorageWorks

--------------------------------------------------------------------------------

Software features
Operating systems DIGITALLY UNIX, Windows NT, OpenVMS
Network support Ethernet, Almost Ethernet, FDDI, Token ring, synchronous communication, ATM
Mass memory Almost SCSI-2, SCSI-2 FW, SCSI-2 FWD, UltraSCSI, RAID, CI, DSSI only (OpenVMS), Prestoserve

--------------------------------------------------------------------------------


Surroundings terms (company)
State case / cupboard
Temperature 10 º C to 35 º C
Rel. Air humidity 20% to 90% (non-condensing)
Electricity supply 450 W

--------------------------------------------------------------------------------

Case data state case
Height 75 cm
Width 49 cm
Depth 90 cm
Weight 113.6 kg









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20084 Sun Fire 280R + SUN A1000

Sun Fire 280R + SUN A1000

not new

19" 4HE, lau. Rechnung:
- 2x 750 MHz
- 2024 MB
- 2x 36 GB

Ports:
- Modem
- Network
- SCSI
- 4x USB

Selbstabholung empf. zusammen mit ext. SCSI-HDD Gehäuse
Keine Garantie auf Korrektheit der Angaben, Gerät nur elektrisch nicht auf Funktion überprüft

The reliable, scalable, rack-ready server powered by UltraSPARC® III technology. For service provision, e-commerce, financial services, branch office automation - any function that requires exceptional power and reliability in a compact, rackable package - the Sun Fire 280R server is an ideal solution. It's powered by up to two high-performance UltraSPARC III Cu processors and features the RAS capabilities Sun servers are known for, including redundant hot-swap power supplies with independent power cords, and front-accessible drives. Its fibre-channel hard disk drive backplane offers software-mirrored hot-plug boot drives. Plus, it provides Remote System Control for simple, lights-out management. With its 4U form factor, the Sun Fire 280R server fits neatly in standard 19-inch racks - perfect for any environment where space is at a premium.

+

SUN StorEdge A1000

Nicht-Neu

4x 36GB bestückt

Cost effective storage solution for reducing your total cost of ownership.
Fully interoperable. Compatible with Sun StorEdge Availability, Utilization, Performance and Resource Management Suites software.
Up to 436 GB of storage (12 x 36-GB) in a single Sun StorEdge A1000/D1000 array.
Up to 3.92 TB (nine Sun StorEdge A1000/D1000 arrays)in single rack cabinet.
Sun StorEdge A1000 array--hardware RAID controller with dedicated 70 MIPS processor and up to 80 MB of cache memory.
Two-node Sun Cluster support.
Dual redundant hot-swap fans and power supplies.
Single- and dual-channel SCSI backplane configurations.
RAID levels of exting LUNs to be reconfigured dynamically.










Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20267 transtec 2200 Graphics Workstation

transtec 2200 Graphics Workstation

Intel Xeon Prozessor, 3.0 GHz, 1 MB Cache, 800 MHz System Bus, Sockel 604

2 GB ECC DDR2 400 (2 DIMMs)

3Ware Raid Controller, 4x S-ATA Ports (Serial ATA/150 Interface), RAID Level 0, 1, 10, 5 und JBOD, BIOS Setup-Programm, Disk Manager 3DM (Web-basierte Management-Software), Hot-Swap und Hot-Spare-Fähigkeit, 64-Bit/66MHz Bus Master, PCI 2.2 konform, unterstützt Windows 2003/XP/2000 (x86), Red Hat Linux 8.0, 9.0 (x86), SuSE Linux 8.2, 8.3 (x86), FreeBSD 4.8, 4.9 (x86), inkl. Kabel
IMPORTANT NOTE: no alarmsignal included

3x Seagate 80 GB S-ATA Festplatte, 7200 U/min
Festplatten für S-ATA RAID
2 Stück gespiegelt
1x hotspare

no disk-drive

16x IDE DVD-ROM

GeForce FX 6600 Grafikkarte (128 MB, PCI-E, dual DVI)

Onboard Broadcom® 5751 PCI-Express x1 Gigabit Ethernet

Schnittstellen:
1x PCI-Express x16
1x PCI-Express x4
3x PCI
1 serielle
1 parallele
2 PS/2
4 USB 2.0
2 Serial ATA/150 Ports
1x IEEE 1394
Tastatur (länderabhängig)
transtec Optical Mouse
Midi-Tower
Windows XP Professional vorinstalliert und auf Recovery CD-ROM
Gewährleistung: 2 Jahre Abholservice

Optional hierzu

PC-Premium: Upgrade auf 3 Jahre Vor-Ort-Service für transtec PCs und Workstations ab Auslieferdatum, 5x8 Stunden. Der Vor-Ort-Service beinhaltet Beginn der telefonischen Fehleranalyse und -diagnose bei Störungsmeldung innerhalb 8 Arbeitsstunden. Bereitstellung, Lieferung und Einbau der benötigten Ersatzteile sowie Störungsbehebung der Hardware vor Ort. Ist eine Störungsbehebung vor Ort erforderlich, wird ein Servicespezialist von transtec oder von einem von transtec autorisierten Service-Partner innerhalb eines Arbeitstages nach Qualifizierung eines Hardware- Defekts durch transtec vor Ort sein. Voraussetzung ist, dass die Qualifikation des Hardware-Defekts vor 16:00 Uhr MEZ erfolgt. Reisezeit und Reisekosten sind im Preis inbegriffen. Die Serviceleistung gilt für die Systemeinheit und alle intern installierten Original-Optionen. Tastatur und Maus sind per Expressaustausch- service abgedeckt. Anspruch auf die oben definierte Leistung besteht ab der Registrierung des Service Packs unverzüglich nach Auslieferung. Serviceabdeckung während der Geschäftszeiten von 8:00 bis 18:00 Uhr an Werktagen, Montag bis Freitag, MEZ. Ein Kaufnachweis (z.B. Angabe der Seriennummer) muss jedesmal mit dem Gerät eingeschickt werden. Ausgeschlossen von dieser Garantie sind wie üblich Beschädigungen durch äussere Einflüsse wie Eindringen von Flüssigkeiten, mechanische Beschädigungen etc. Weitere Details sind im entsprechenden Servicevertrag enthalten.









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20476 transtec 2600W Server mit internem RAID

transtec 2600 W server with internal RAID

Two Intel Xeon processor, 3.0 GHz, 512 KB Cache, 533 MHz of system coach, base 604Intel of E7501 chip sentence

2 GB ECC DDR-RAM (4 DIMMs)

onboard 2-canal Ultra320 SCSI (externeHD68 connection) for the connection of the Backup-Library

Hotswap installation frames for 5 3.5" hard disks SATA

8x Seagate 400 GB of hard disk SATA NCQ, 7200 revos
Hard disks for S-ATA RAID
4x hard disks in the RAID 5 group
1x Hotspare
3x Coldspare

GDT Raid controller
8-canal Serial ATA 1.0 hardware PCI controller RAID for RAID level 0, 1, 4, 5 and 10. 64 bits of Intel 80303 processors, 128 mb Cache-RAM, up to 150 mb / sec of data transfer rate per canal, console ICP RAID and navigator ICP RAID installation and monitoring, suitably for low-profile and normal slots PCI

SCSI Controller
64 bit, 133 MHz PCI-X, Ultra320 SCSI Hostadapter with two canals, for the connection from up to 30 SCSI devices, data transfer SCSI max. 640 MB/PAGES, ext. Connection: two VHDCI, int. Connection: an extremist HD68 320

NEC ND-3540, DVD disk drive +/-R/RW, stand-in Layer functionallity, Atapi, Ultra-DMA 33, writing: DVD+R 16x, DVD+R9 8x, DVD-R9 4x, DVD-R 16x, DVD+RW 8x, DVD-RW 6x, CD-R 48x, CD-RW 32x, reading: DVD ROM 16x, CD-ROM 48x, 2 mb of buffer, buffers Underrun Prevention, black front screen, without Nero software

IEEE 802.3ad supports Intel PER / in 1000 server XF Gigabit of adaptors, for PCI/PCI-X, 32/64 bit, to 133 MHz, 64 KB Onboard Memory, 1000BASE-SX (SC) port, for multifashion fiber (62.5-50 µ m), Intel single Driver Technologie, Plug & Play, agent supports DMI 2.0, Intel boat link Aggregation, 802.1 q VLANs, 802.3x Flow Control, 802.1p Class of service, management, supports Windows 2000, XP, NT 4.0, Solaris 7 and 8, UnixWare 7.x, Linux from version 2.2.5, FreeBSD

onboard ATI rage XL 8 mb PCI graphics

Additional Adaptec FireWire and USB 2.0 map, 3 x FireWire and 4 x USB 2.0 connections, incl. 1.8 m of FireWire cable, software for the treatment of videos, USB 2.0 driver of Windows 98 SE, ME and in 2000

Floppy disk drive

1 serial ones

1 parallel ones

4 USB

2 HP / 2 interfaces

onboard binary 10/100/1000BASE T Gigabit Ethernet

IPMI Management map

Keyboard

Mouse

Tower

redundant 600 watts of net part

Windows Server 2003 (5 cals) preloaded and on CD-ROM
In addition: 15 users client Access licences for Windows Server 2003, in German
Guarantee: 1 year

Rackmount-Kit for transtec in 2600, 4 HEY

Guarantee: 2 years of Abholservice, 1st year on site, NBD
Service:

Server-Exclusive: Upgrade for 3 years of on site-service for transtec server from Auslieferdatum, 7x24x4 hours, 365 days. The on site-service contain beginning of the telephone mistake analysis and mistake diagnosis with disturbance announcement within 4 hours. Supply, delivery and installation of the required spare parts as well as disturbance removal of the hardware on site. If a disturbance removal is necessary on site, a service specialist from transtec or from one of transtec authorised service partner will be within 4 hours after qualification of a hardware of defect by transtec on site. In special cases presents transtec within this period at least one action plan and commits itself in it to a very current disturbance removal. Holiday season and travel expenses are included in the price. The service is valid for the system unity and all inside installed original options. Keyboard and mouse are covered by express exchange service. Claim to the achievement defined on top exists from the registration of the service of stack immediately after delivery. Moreover, of this service stack a special Enterprise telephone number with priorisierter connection with a Support employee includes. Service cover during the times of from 0:00 to 24:00 o'clock, 7 days in the week, 365 days in the year. A purchase proof (e.g., information of the standard number) must be sent in every time with the device. Excluded by this guarantee damages are as usual by external influence like penetration of liquids, mechanical damages etc. other details are included in the suitable service contract








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

27390 19 Zoll Rackmount Server schwarz 3 GHZ 1 GB Dualchannel DDRAM 2x160GB HDD RAID

19 inches Rackmount server black 3 GHz 1 GB of dual channel DDRAM 2x160GB HDD RAID

Non-new

Technical details:

CPU 3 GHz of Pentium 4 (200*15)
Aopen DVD disk drive
Tape disk drive
Disks disk drive
1 GB of dual channel the GDR RAM
2x160 GB Seagate hard disk

Gigabyte of GA 8KNXP extremist Rev. 2 with the Pentium i875P chip sentence

Specification
Processor Socket 478 for Pentium ® 4 Processor

Chip set Northbridge: Intel ® 875P MCH
Southbridge: Intel ® ICH5R
Integrated Peripherals:
Adaptec Ultra320 SCSI chip
Intel ® CSA interface Gigabit Ethernet controller
GigaRAID controller chip
Realtek ALC658 CODEC

Front Side coach 800 / 533 / 400 MHz FSB

Memory Type: Dual channel the GDR 400 / 333 / 266 ECC support
Max capacity: 4 GB (Please read FAQ for further information)
DIMM slots: 6 *
*Note: Through GIGABYTE innovation of supporting 6 DIMMS memory on Intel chipset motherboard. However, due to chipset limitations there wants be a frequency downgrade of memory modules when 6 DIMMs are fully loaded.
Internal I/O Connectors 2 x Serial ATA
2 x SCSI connector
2 x USB 2.0 (Support 4 ports by cable)
1 x S. / P-DIF input / output pin header
1 x FDD
2 x UltraDMA 133/100/66 coach master IDE (For HDDs only)
2 x UltraDMA 100/66 coach master IDE
CD / AUX in
1 x Game port pin header

Expansion slots 1 x AGP Per slot
5 x PCI slots (PCI 2.3 compliant)
1 x DPS slot

Rear Panel I/O 4 x USB 2.0 ports
1 x RJ45 LAN port
1 x LPT port
2 x COM ports
3 x audio ports (Line in / Line out / MIC)
2 x HP / 2 ports (keyboard / Mouse)

Form Factor ATX
30.5 cm x 24.4 cm

H/W monitoring ITE 8712fa
System health status car detect and report by BIOS
Hardware detecting and reporting for case open, power in voltage, CPU voltage, and fan speed.

BIOS 2 x 4 m bit flash ROM, Award BIOS

Of Other features C.I.A.
Xpress Install
Xpress Recovery
Smart fan
EasyTune ™ 4
@BIOS
Q-Flash ™
Multinational Language BIOS

Driver Intel ® chipset software installation utility
Adaptec Ultra320 SCSI driver
GigaRAID IDE RAID driver
Intel ® RAID Driver
Intel ® PER / in 1000 CT. LAN driver
REALTEK audio driver
USB2.0 driver








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

27391 19 Zoll Rackmount Server schwarz 3 GHZ 4 GB Dualchannel DDRAM 2x160GB HDD RAID

19 inches of server black 3 GHz 4 GB RAM

Non-new

Technical details:

Gigabyte of GA 8KNXP extremist Rev. 2

Specification
Processor Socket 478 for Pentium ® 4 Processor

Chip set Northbridge: Intel ® 875P MCH
Southbridge: Intel ® ICH5R
Integrated Peripherals:
Adaptec Ultra320 SCSI chip
Intel ® CSA interface Gigabit Ethernet controller
GigaRAID controller chip
Realtek ALC658 CODEC

Front Side coach 800 / 533 / 400 MHz FSB

Memory Type: Dual channel the GDR 400 / 333 / 266 ECC support
Max capacity: 4 GB (Please read FAQ for further information)
DIMM slots: 6 *
*Note: Through GIGABYTE innovation of supporting 6 DIMMS memory on Intel chipset motherboard. However, due to chipset limitations there wants be a frequency downgrade of memory modules when 6 DIMMs are fully loaded.
Internal I/O Connectors 2 x Serial ATA
2 x SCSI connector
2 x USB 2.0 (Support 4 ports by cable)
1 x S. / P-DIF input / output pin header
1 x FDD
2 x UltraDMA 133/100/66 coach master IDE (For HDDs only)
2 x UltraDMA 100/66 coach master IDE
CD / AUX in
1 x Game port pin header

Expansion slots 1 x AGP Per slot
5 x PCI slots (PCI 2.3 compliant)
1 x DPS slot

Rear Panel I/O 4 x USB 2.0 ports
1 x RJ45 LAN port
1 x LPT port
2 x COM ports
3 x audio ports (Line in / Line out / MIC)
2 x HP / 2 ports (keyboard / Mouse)

Form Factor ATX
30.5 cm x 24.4 cm

H/W monitoring ITE 8712fa
System health status car detect and report by BIOS
Hardware detecting and reporting for case open, power in voltage, CPU voltage, and fan speed.

BIOS 2 x 4 m bit flash ROM, Award BIOS

Of Other features C.I.A.
Xpress Install
Xpress Recovery
Smart fan
EasyTune ™ 4
@BIOS
Q-Flash ™
Multinational Language BIOS

Bundle software Norton Internet Security in 2003
Norton Anti virus ™
Norton ™ staff Firewall
Norton ™ Privacy Control
Norton ™ Parental Control
Norton ™ Spam Alert
GIGABYTE Windows Utility manager
Adobe Acrobat reader

Driver Intel ® chipset software installation utility
Adaptec Ultra320 SCSI driver
GigaRAID IDE RAID driver
Intel ® RAID Driver
Intel ® PER / in 1000 CT. LAN driver
REALTEK audio driver
USB2.0 driver








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

30969 Server Dual Pentium III 2 x 1.0GHz 512 MB RAM

Server dual Pentium III 1.0 GHz 512 MB RAM

Non-new

CPU: 2 x Pentium III 1 GHz of CPUs 256 KB Cache
Working memory: 512 MB RAM
Mass memory:2 x 17.1 GB HDD
Adaptec AIC-7899 Ultra160 / m of PCI SCSI map
Tekram: DC-395U / UW/FA. DC315 / U or DC-305I / E extremist PCI adaptor SCSI Host
Graphics card: ATI TECHNOLOGIES Inc 3DRage IIC PCI








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

30977 Sun Enterprise 220R Server 19 Zoll Rack

Sun Enterprise 220R Server 19 Zoll Rack

not new

Ram:
1 GB / 2 GB (Max), 256 MB / 2 GB (Max), 2 GB / 2 GB (Max), 512 MB / 2 GB (Max), 128 MB / 2 GB (Max)

Datanbus-Speed: 112.5 MHz








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

33753 SWS MetaDimension Workstation

SWS MetaDimension Workstation

Non-new

Windows 2000 Server

2 Intel Xeon 2.66 GHz processors
2 GB of RAM
DVD ROM
Floppy disk drive
1 Fujitsu 73GB SCSI U320 HDD
1 Fujitsu 36.7 GB SCSI U320 HDD
1 Fujitsu 36.7 GB SCSI U320 HDD
Maximum of up to 5 hard disks can be installed
2 redundant power supplies
2 Gigabit Ethernet copper on Board


Dongle not included

Prinect MetaDimension 5.0 + Enfocus Software
Prinect Metadimension option Colorproof Pro 4up

Heidelberg MetaDimension

Professional RIP and workflow software from Heidelberg.
Heidelberg RIP and workflow software MetaDimension

Heidelberg's new RIP and workflow software MetaDimension opened an entrance into the PDF-based workflow.

With the new PDF workflow module facilitates MetaDimension Heidelberg printers, trade shops and service bureaus with low-cost entry into the PDF-based workflow. At the same time provide open interfaces to integrate into existing workflow systems. MetaDimension also wants smaller printing companies and agencies offer an inexpensive alternative to the Adobe Portable Document Format (PDF)-based workflow to enter.

MetaDimension combines an open systems architecture and modular design. This means the software can be in an existing workflow environment integrating from other suppliers. MetaDimension based on the Adobe PostScript 3 printing and imaging technology, a PDF renderer. It thus offers a variety of prepress and workflow functionality within the Adobe printing platform. For example, after color management, proofing, trapping, page positioning, CIP 4 and OPI (Open Prepress Interface) support. Users also have a variety Acrobat plug-ins and applications available to a productive PDF workflow. Modular flexibility is the philosophy behind MetaDimension, because the use of Adobe Acrobat technology enables a wide range of other options and plug-ins from Heidelberg and other manufacturers.

MetaDimension has been on the new industry standard JDF (Job Definition Format). In addition, through import and export screened TIFF files can also control third party can be controlled.

MetaDimension in detail: the portal for easy access to PDF

MetaDimension works based on PDF and uses Adobe Portable Job Ticket Format (PJTF). As standard input formats PostScript (Level 1, Level 2 and 3) and PDF are accepted. InRip functions such as trapping, page positioning, color management and make a compact, automated workflow. In combination with other Heidelberg products Supertrap, an Acrobat plug-in, or the imposition software Signastation can build a more open, modular process. Signastation not only allows the imposition of complex jobs with both PDF and job tickets based on PostScript, but due to the use of CIP 4 PPF (Print Production Format), the disclosure of all job data to downstream stages of production.


MetaDimension can customize the user's needs and to expand even further. Integration with existing Delta Technology or Prinergy workflow are possible. This is achieved through the options DeltaFlow to acquire Delta lists MetaDimension and Auto Flow for automated acquisition of job ticketing and PDF files from Prinergy. MetaDimension can be operated from any Mac or PC on the network.








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34225 Dell PowerEdge 600SC

Dell PowerEdge 600SC

Not-New according to our terms of service (AGB)



- 1,8GHz
- 512KB L2 Cache
- 80GB SCSI HDD
- SCSI Controller
- Windows 2000 Server Englisch








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34546 Sun Fire 280R

Sun Fire 280R

Non-new

. 19 "4U, tepid statement: 2x 750 MHz, 2024 MB, 2x 36GB, no guarantee for correctness of the information appliance electrically checked not to function, connections: modem, network, SCSI, 4x USB, recommended Pickup with. ext. SCSI HDD Enclosure

The reliable, scalable, rack-ready server powered by UltraSPARC® III technology. For service provision, e-commerce, financial services, branch office automation - any function that requires exceptional power and reliability in a compact, rackable package - the Sun Fire 280R server is an ideal solution. It's powered by up to two high-performance UltraSPARC III Cu processors and features the RAS capabilities Sun servers are known for, including redundant hot-swap power supplies with independent power cords, and front-accessible drives. Its fibre-channel hard disk drive backplane offers software-mirrored hot-plug boot drives. Plus, it provides Remote System Control for simple, lights-out management. With its 4U form factor, the Sun Fire 280R server fits neatly in standard 19-inch racks - perfect for any environment where space is at a premium.












Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34865 Exone Challenge 1150

Exons Challenge 1150 Server

Title: SC512L-260B
Motherboard: P8SCT
max. Number of Processors: 1
Processor: 1 x Intel Pentium 4 3.0 GHz
Processor Socket: LGA 775
Front Side Bus (FSB) FSB 1066/800/533
Chipset: Intel 7221
Max memory: 4 GB DIMM * 4
Storage: 2 x 512 MB ​​Kingston DDR2-533 CL3 VR
Hot-Swap drive: 2x SATA internal
LAN Chip: 2 x Intel Gigabit 82 573;
Supports 10/100/1000Base-T, RJ45 output
LAN Ports: 2
RAID Support: 4-channel Intel ® ICH7R RAID 0, 1, 10 support
Graphics: ATI RAGE XL 8MB
HDD: 1 x SATA 160 GB WD (24x7 hours)
PCI-X low profile slots: 1x 64-bit / 66MHz / riser card
Interfaces: 1x serial, parallel, VGA, 2x PS / 2, 6x USB, 2xRJ45,
Power supply single / redundant: single 260 Watt
Housing: 19 "1U
Software: Super Doctor III / watchdog
Telescopic rails: included
Width / Height / Depth: 422/43/356mm
Warranty: 3 years warranty including Advance Replacement








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34866 Exone Challenge 1100

Exons Challenge 1100 server

Title: SC733TQ-645B
Motherboard: PDSME +
Processor: 1 x Intel Xeon UP 3040 1.86GHz
Processor Socket: LGA 775
Front Side Bus (FSB) FSB 1066/800/533
Chipset: Intel 3000 Series
Max memory: 8GB DIMM * 4
Storage: 2 x 512 MB ​​Kingston DDR2-533 CL3 VR
Hot-Swap drive: 2x SATA hot swap
LAN Chip: 2 x Intel Gigabit 82 573;
Supports 10/100/1000Base-T, RJ45 output
LAN Ports: 2
RAID Support: 4-channel Intel ® ICH7R RAID 0, 1, 5, 10 support
Graphics: ATI ES 1000 16 MB
HDD: 2 x SATA 160 GB WD (24x7 hours)
PCI-X low profile slots: 1x 64-bit / 66MHz / riser card
Interfaces: 1x serial, parallel, VGA, 2x PS / 2, 6x USB, 2xRJ45,
Power supply single / redundant: single 300 Watt
Housing: 19 "1U
Software: Super Doctor III / watchdog
Telescopic rails: included
Width / Height / Depth: 426/43/574mm
Warranty: 3 years warranty including Advance Replacement








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34868 Exone Storage 1000

Exons Storage Server 1000

Title: SC811T-300B
Motherboard: PDSMI +
max. Number of Processors: 1
Processor: 1 x Intel Xeon UP 3040 1.86GHz
Processor Socket: LGA 775
Front Side Bus (FSB) FSB 1066/800/533
Chipset: Intel 3000 Series
Max memory: 8GB DIMM * 4
Storage: 2 x 512 Kingston DDR2 400/533/633
Hot-Swap drive: 4 x SATA hot swap (SAS possible)
LAN Chip: 2 x Intel Gigabit 82 573;
Supports 10/100/1000Base-T, RJ45 output
LAN Ports: 2
RAID Support: 4-channel Intel ® ICH7R RAID 0, 1, 5, 10 support
Graphics: ATI ES 1000 16 MB
DVD-ROM / Floppy: DVD-ROM 5.25 ", 3.5" floppy
HDD: 2 x SATA 160 GB WD (24x7 hours)
PCI Express 1 x PCI Express (4), 1 x PCIe (8)
PCI-X full-height slots: 2x 64-bit / 133 MHz
PCI-X low profile slots: 2x 64-bit / 66MHz / riser card
Interfaces: 2x USB front panel Optional IOShield 4x, 1x serial, VGA, 2x PS / 2, 4x USB, 1x R45
Power supply single / redundant: single 645 Watt
Case: Tower
Software: Super Doctor III / watchdog
Telescopic rails: optional
Width / Height / Depth: 427/178/531mm
Warranty: 3 years warranty including Advance Replacement








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34869 Exone Proxima 3150

Exons Proxima 3150 Server

Title: SC743S2-R760B
Motherboard: X7DB8 +
max. Number of processors: 2
Processor: 2 x Intel Xeon 5060 3.2 GHz
Processor Socket: LGA 771 Dual
Front Side Bus (FSB): 1333/1066/667
Chipset: Intel 5000 Series
Memory max: 64 GB, DIMM * 16
Storage: 2 x 5 12 MB ​​Kingston FB-DIMM DDR2-/533 / 667
Hot-Swap drive: 8x SCA hot-swap
free 5.25 "drive bays: 3x
LAN: Intel 82563EB Dual-port Gigabit Ethernet Controller
LAN Ports: 2
SCSI Controller: Adaptec LPCZR2 optional RAID 1, 0, 5, 10, 50
RAID Support: RAID Adaptec 7902W dual channel 1.0
Graphics: ATI ES 1000 16 MB
DVD-ROM / Floppy: DVD-ROM 5.25 ", 3.5" floppy
HDD: 4x SCA 147GB Fujitsu Siemens
PCI Express: 2x PCIe x8
PCI-X full-height slots: 1x 64-bit / 133MHz
PCI-X low profile slots: 2x 64-bit / 100MHz
Interfaces: 2x serial, parallel, VGA, 2x PS / 2, 4x USB, 2xRJ45,
Power supply single / redundant: Redundant 760 + 380 watts
Case: Tower or 19 "with 4U
Software: Super Doctor III / watchdog / IPMI 2.0Socket
Telescopic rails: Optional
Width / Height / Depth: 449/132/648mm
Warranty: 3 years warranty including Advance Replacement








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34870 Exone Silent 1000

Exons Silent Server 1000

Title: SC743T-645B
Motherboard:-O X7DAE
max. Number of processors: 2
Processor: 1 x Intel Xeon 5060 3.2 GHz
Processor Socket: LGA 771 Dual
Front Side Bus (FSB): 1333/1066/667
Chipset: Intel 5000 Series
Memory max: 32 GB, DIMM * 8
Storage: 2 x 5 12 MB ​​Kingston FB-DIMM DDR2-/533 / 667
Hot-Swap drive: 8 x SATA
free 5.25 "drive bays: 3x
LAN: Intel 82563EB Dual-port Gigabit Ethernet Controller
LAN Ports: 2
RAID support: 6x SATAII ports via ESB2 Controller
Graphic: Pci Express Sapphire X300 SE 128 MB
DVD-ROM / Floppy: DVD-ROM 5.25 ", 3.5" floppy
HDD: 2 x 160 GB WD (24x7 hours)
PCI Express: PCI Express x16 / PCI Express x8
PCI-X full-height slots: 2 x 64-bit / 133MHz
PCI-X low profile slots: 1 x 64-bit / 100 MHz
Low-profile PCI slots: 1 x 33-bit / 33MHz
Interfaces: 2x serial, parallel, VGA, 2x PS / 2, 4x USB, RJ45, audio AC97
Power supply single / redundant: single 645 Watt
Case: Tower or 19 "with 4U
Software: Super Doctor III / watchdog / IPMI 2.0Socket
Telescopic rails: Optional
Width / height / depth: 449/178/648 mm
Warranty: 3 years warranty including Advance Replacement








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34871 Exone Silent 1100

Exons Silent 1100 server

Title: SC743S-645B
Motherboard:-O X7DAE
max. Number of processors: 2
Processor: 1 x Intel Xeon 5060 3.2 GHz
Processor Socket: LGA 771 Dual
Front Side Bus (FSB): 1333/1066/667
Chipset: Intel 5000 Series
Memory max: 32 GB, DIMM * 8
Storage: 2 x 5 12 MB ​​Kingston FB-DIMM DDR2-/533 / 667
Hot-Swap drive: 8 x SCSI
free 5.25 "drive bays: 3x
LAN: Intel 82563EB Dual-port Gigabit Ethernet Controller
LAN Ports: 2
SCSI Controller: Adaptec LPCZR1 optional RAID 1, 0, 5, 10, 50
RAID Support: RAID Adaptec 7902W dual channel 1.0
Graphic: Pci Express Sapphire X300 SE 128 MB
DVD-ROM / Floppy: DVD-ROM 5.25 ", 3.5" floppy
HDD: 2 x 73.5 GB SCA Fujitsu Siemens
PCI Express: PCI Express x16 / PCI Express x8
PCI-X full-height slots: 2 x 64-bit / 133MHz
PCI-X low profile slots: 1 x 64-bit / 100 MHz
Low-profile PCI slots: 1 x 33-bit / 33MHz
Interfaces: 2x serial, parallel, VGA, 2x PS / 2, 4x USB, RJ45, audio AC97
Power supply single / redundant: single 645 Watt
Case: Tower or 19 "with 4U
Software: Super Doctor III / watchdog / IPMI 2.0Socket
Telescopic rails: Optional
Width / height / depth: 449/178/648 mm
Warranty: 3 years warranty including Advance Replacement








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34872 Exone Proxima 1000

Exons Proxima 1000 servers

Name: * SC743TQ-R760B
Motherboard: X7DA3
max. Number of processors: 2
Processor: 1 x Intel Xeon 5060 3.2 GHz
Processor Socket: LGA 771 Dual
Front Side Bus (FSB): 1333/1066/667
Chipset: Intel 5000 Series
Memory max: 32 GB, DIMM * 8
Storage: 2 x 5 12 MB ​​Kingston FB-DIMM DDR2-/533 / 667
Hot-Swap drive: 8 x hot-swap SAS
free 5.25 "drive bays: 3x
LAN: Intel 82563EB Dual-port Gigabit Ethernet Controller
LAN Ports: 2
SCSI Controller: Adaptec LPCZR2 optional RAID 1, 0, 5, 10, 50
RAID Support: Adaptec AIC-9410W dual channel SAS controller, 8-port
Graphics: ATI ES 1000 16 MB
DVD-ROM / Floppy: DVD-ROM 5.25 ", 3.5" floppy
HDD: 2x SAS 73.5 GB Fujitsu Siemens
PCI Express: PCI Express x16 / PCI Express x4
PCI-X full-height slots: 2 x 64-bit / 133MHz
PCI-X low profile slots: 1 x 64-bit / 100 MHz
Low-profile PCI slots: 1 x 33-bit / 33MHz
Interfaces: 2x serial, parallel, VGA, 2x PS / 2, 4x USB, RJ45, audio AC97
Power supply single / redundant: Redundant 760 + 380 watts
Case: Tower or 19 "with 4U
Software: Super Doctor III / watchdog / IPMI 2.0Socket
Telescopic rails: Optional
Width / height / depth: 449/178/648 mm
Warranty: 3 years warranty including Advance Replacement








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34873 Exone Proxima 1155 SCSI


Exons Proxima 1155 SCSI

Title: SC823S R500LP-B-
Motherboard: X7DB8
max. Number of processors: 2
Processor: 1 x Intel Xeon DP 3.2GHz 5060
Processor Socket: LGA 771 Dual
Front Side Bus (FSB): 1333/1066/667
Chipset: Intel 5000 Series
Memory max: 16 GB / 32 GB, DIMM * 8
Storage: 2 x 1GB Kingston FB-DIMM DDR2-/533 / 667
Hot-Swap drive: 6x SCA hot-swap
free 5.25 "drive bays: 1x
LAN: Intel 82563EB Dual-port Gigabit Ethernet Controller
LAN Ports: 2
SCSI Controller: Adaptec Optinal LPCZR1 RAID 1, 0, 5, 10, 50
RAID Support: RAID Adaptec 7902W dual channel 1.0
Graphics: ATI ES 1000 16 MB
DVD-ROM / Floppy: DVD-ROM 5.25 ", 3.5" floppy
HDD: 2 x 73.5 GB SCA Fujitsu Siemens
PCI Express: 2x PCIe x8
PCI-X low profile slots: 2x 64-bit / 100MHz
Low-profile PCI slots: 1x 64-bit / 133MHz
Interface: Optional 2x USB front, 4x IOShield, 2x serial, parallel, VGA, 2x PS / 2, 4x USB, 1xRJ45
Power supply single / redundant: Redundant 500 Watt
Housing: 19 "2U
Software: Super Doctor III / watchdog
Telescopic rails: including Mountingrails
Width / Height / Depth: 427/89/648 mm
Warranty: 3 years warranty including Advance Replacement








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34874 Exone Proxima 1155 SATA

Exons Proxima 1155 SATA

Title: SC823TQ-R500LP-B
Motherboard: X7DBE
max. Number of processors: 2
Processor: 1 x Intel Xeon DP 3.2GHz 5060
Processor Socket: LGA 771 Dual
Front Side Bus (FSB): 1333/1066/667
Chipset: Intel 5000 Series
Memory max: 16 GB / 32 GB, DIMM * 8
Storage: 2 x 1GB Kingston FB-DIMM DDR2-/533 / 667
Hot-Swap drive: 6x SATA hot-swap (SAS possible)
free 5.25 "drive bays: 1x
LAN: Intel 82563Exons Proxima 1155 SCSI

Title: SC823S R500LP B
Motherboard: X7DB8
max. Number of processors: 2
Processor: 1 x Intel Xeon DP 3.2GHz 5060
Processor Socket: LGA 771 Dual
Front Side Bus (FSB) 1333/1066/667
Chipset: Intel 5000 Series
Memory max: 16 GB / 32 GB, DIMM * 8
Storage: 2 x 1GB Kingston FB-DIMM DDR2-/533 / 667
Hot-swap drive: 6x SCA hot-swap
free 5.25 "drive bays: 1x
LAN: Intel 82563EB Dual-port Gigabit Ethernet Controller
LAN Ports: 2
SCSI Controller: Adaptec Optinal LPCZR1 RAID 1, 0, 5, 10, 50
RAID Support: RAID Adaptec 7902W dual channel 1.0
Graphics: ATI ES 1000 16 MB
DVD-ROM / Floppy: DVD-ROM 5.25 ", 3.5" floppy
HDD: 2 x 73.5 GB SCA Fujitsu Siemens
PCI Express: 2x PCIe x8
PCI-X low profile slots: 2x 64-bit / 100MHz
Low-profile PCI slots: 1x 64-bit / 133MHz
Interface: Optional 2x USB front, 4x IOShield, 2x serial, parallel, VGA, 2x PS / 2, 4x USB, 1xRJ45
Power supply single / redundant: Redundant 500 Watt
Housing: 19 "2U
Software: Super Doctor III / watchdog
Telescopic rails: including Mountingrails
Width / Height / Depth: 427/89/648 mm
Warranty: 3 years warranty including Advance ReplacementEB Dual Port Gigabit Ethernet Controller
LAN Ports: 2
SCSI Controller: Adaptec LPCZR1 optional RAID 1, 0, 5, 10, 50
RAID Support: RAID Adaptec 7902W dual channel 1.0
Graphics: ATI ES 1000 16 MB
DVD-ROM / Floppy: DVD-ROM 5.25 ", 3.5" floppy
HDD: 3 x 160GB WD (24x7 hours)
PCI Express: 2x PCIe x8
PCI-X low profile slots: 2x 64-bit / 100MHz
Low-profile PCI slots: 1x 64-bit / 133MHz
Interface: Optional 2x USB front, 4x IOShield, 2x serial, parallel, VGA, 2x PS / 2, 4x USB, 2xRJ45, IR
Power supply single / redundant: Redundant 500 Watt
Housing: 19 "2U
Software: Super Doctor III / watchdog
Telescopic rails: including Mountingrails
Width / Height / Depth: 427/89/648 mm
Warranty: 3 years warranty including Advance Replacement








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34875 Exone Challenge 3000

Exons Challenge 3000

Name: SC942i-600B
Motherboard: E-X7DVL
max. Number of processors: 2
Processor: 1 x Intel Xeon 5030 3.0GHz
Processor Socket: LGA 771 Dual
Front Side Bus (FSB): 1333/1066/667
Chipset: Intel 5000 series
Memory max: 16 GB / 32 GB, DIMM * 6
Storage: 2 x 1GB Kingston FB-DIMM DDR2-/533 / 667
Hot-swap removable frame: 5 x SATA / SAS hot-swap

free 5.25 "drive bays: 3x
LAN: Intel 82563EB Dual-port Gigabit Ethernet Controller
LAN Ports: 2
RAID Support: RAID Adaptec 7902W dual-channel 1.0
Graphics: ATI ES 1000 16MB
DVD-ROM / Floppy: DVD-ROM 5.25 "floppy 3.5"
HDD: 2x 160GB WD (24x7 hours)
Full-height PCI-X slots: 2 x 64-bit / 133MHz
Low Profile PCI-X slots: 2x 32-bit / 33MHz
Interface: USB 2x front, 2x header serial, 1x parallel internal, VGA, 2x PS / 2, 4x USB, 2xRJ45,
Power supply single / redundant: triple red. 600 watts
Case: Tower or 19 "with 4U
Software: Super Doctor III / watchdog
Telescopic slides: Optional
Width / height / depth: 452/178/605 mm
Warranty: 3 years warranty including advance exchange








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

34876 Exone Challenge 3100

Exons Challenge 3100

Title: SC942i-600B
Motherboard: E-X7DVL
max. Number of processors: 2
Processor: 1 x Intel Xeon DP 3.0GHz 5030
Processor Socket: LGA 771 Dual
Front Side Bus (FSB): 1333/1066/667
Chipset: Intel 5000 Series
Memory max: 16 GB / 32 GB, DIMM * 6
Storage: 2 x 1GB Kingston FB-DIMM DDR2-/533 / 667
Hot-Swap drive: 5 x SATA / SAS hot-swap
free 5.25 "drive bays: 3x
LAN: Intel 82563EB Dual-port Gigabit Ethernet Controller
LAN Ports: 2
SCSI Controller: Adaptec LPCZR1 optional RAID 1, 0, 5, 10, 50
RAID Support: RAID Adaptec 7902W dual channel 1.0
Graphics: ATI ES 1000 16 MB
DVD-ROM / Floppy: DVD-ROM 5.25 ", 3.5" floppy
HDD: 2x 160GB WD (24x7 hours)
PCI-X full-height slots: 2 x 64-bit / 133MHz
PCI-X low profile slots: 2x 32-bit / 33MHz
Interfaces: 2x USB front, 2x serial, 1x parallel internal headers, VGA, 2x PS / 2, 4x USB, 2xRJ45,
Power supply single / redundant: Triple red. 600 watts
Case: Tower or 19 "with 4U
Software: Super Doctor III / watchdog
Telescopic rails: Optional
Width / height / depth: 452/178/605 mm
Warranty: 3 years warranty including Advance Replacement








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

35985 Transtec 2600W Server

TRANSTEC 2600W Tower Server

Used

includes

- 2x Intel Xeon (HT) 2660 MHz

- Mainboard SUPERMICRO SUPER X5DAE
- Gigabit Ethernet onboard
- Sound onboard
- 4x USB 2.0 (2 front, 2 back)

- 2048 MB ECC DDR-SDRAM, PC2700 (max. 12GB, KVR266X72RC25L/2G)

- NVIDIA GeForce FX 5200 with 1 DVI, 1 VGA connector

- Adaptec SCSI Card 29160, 64 Bit-PCI Ultra 160

- ICP Vortex GDT8546RZ -SATA RAID Controller:
SATA-150, 4-channel RAID 0, 1, 4, 5, 10

- ICP Vortex GDT8586RZ -SATA RAID Controller:
SATA-150, 8-channel RAID 0, 1, 4, 5, 10

- 2x 80 GB SATA HDD RAID 1(80GB useable memory)
- 8x 400 GB SATA HDD RAID 5 + HOTSPARE (2400GB useable memory)

- CD-RW-drive

-Windows 2003 Server








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

36719 HP ProLiant ML330 G3 Server

HP ProLiant ML330 G3 Server

Not-New according to our terms of service (AGB)



Technische Daten:

- Intel Xeon HT 3060 MHz
- 2 GB ECC DDR-SDRAM
- 2 x 80 GB ATA HDD
- CD-Laufwerk
- 2 x USB
- LSI Ultra SCSI Controller
- Netzwerkkarte onboard
- HP StorageWorks Ultrium 215 Tape Drive
- Grafik onboard
- Ohne Betriebsystem









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

36721 Telekommunikations 19" Server Rack (4HE)

Telecommunications - Servers 19 "Rack 4U

Non-new

- Pentium 4 2400 MHz
- 2048 MB DDR SDRAM
- 2 x 80GB HDD
- CD-ROM
- 4x USB
- Motherboard: ASUS P4P800-X
- Network adapter onboard + 2 NIC
- Eicon PCI card with 4 x SO
- Radeon 7000
- Sound onboard
- No operating system








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

37362 HP Proliant DL360 G3

HP Proliant DL360 G3

Non-new

Without mounting rails

Machine Model: ProLiant DL360 G3

Operating System: Microsoft Windows 2000 Server is not included, but not installed for testing

board
BIOS:
Manufacturer: Manufacturer: HP
Model: Revision: P31
Serial number: Output-date. ****** 20040501 ****** + ***
SMBIOS Rev: 2.3

CPU:
Quantity: 2
Processor Model: Intel (R) Xeon (TM) CPU 2.80GHz clock speed: 2799 Mhz
Manufacturer: Intel
Number of logical CPU's: 4

memory
Type:
Physical memory 3071 MB DDR ECC RAM
Memory slots: 4
Supported Memory (max.): 8192 MB

slots
PCI slot 1
PCI slot 2

USB
Description:
Standard OpenHCD USB ​​Host Controller

Serial ports
Communications Port (COM1)

graphics card
Description: ATI Technologies Inc. RAGE XL PCI
Model: ATI Technologies Inc. RAGE XL PCI
Driver: 5.00.2179.1 Memory: 8 MB

Network details
Network adapters # 1 # 2
Description:
Compaq NC7781 Gigabit Server Adapter
Compaq NC7781 Gigabit Server Adapter

Memory Details
physical disks
COMPAQ LOGICAL VOLUME SCSI Disk Device 36.4GB
COMPAQ LOGICAL VOLUME SCSI Disk Device 34.4 GB

controller
HP Smart Array 5i SCSI controller onboard








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

38660 PLASMON G24 Series UDO

PLASMON G24 Series UDO (Jukebox) für max 24 Disks, ein Schlitten und 2x PLASMON UDO1-LE optischen Laufwerken (Model UDO-30l), Anschluss über SCSI/LVD Kabel.

Außenmaße in cm:
Höhe:77 cm inkl. Rollen
Breite: 28cm
Tiefe: 80cm, Gerät komplett ungeprüft.

24 slots for media storage
2 drives for reading/writing data
220GB capacity with Magneto-Optical (M-O)
720GB capacity with 30GB Ultra Density Optical (UDO-1)
1.4TB capacity with 60GB Ultra Density Optical (UDO-2)
Mix M-O and UDO media within the same library
Media Bar Code Reader (optional)
Floor-Standing or Rack-Mountable
LVD SCSI Interface (standard)
HVD SCSI Interface (optional)
2,000,000 media swaps between failure
5.5 second media exchange time
One-Year On-Site Service Contract Included
Dimensions: 31” x 11” x 31” (H x W x D)
Weight: 95 Lbs.








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

38796 Fujitsu Siemens Primergy RX300 S2 (D1889)

Fujitsu Siemens Primergy RX300 S2 (D1889)

Nicht-Neu

Fujitsu Siemens Primergy RX300 S2 (D1889) Server 19" Rack 2 HE mit 2x Intel Xenon (HT) 3 GHz, 8GB ECC Reg. DDR2-RAM, 2x37GB, 4x147 GB SCSI HDD, DVD-ROM/CD-RW, 2x USB, onboard LSI 53C1030 Contr., 2x NWK onboard (Broadcom NetXtreme-Gigabit-Ethernet) & 2 Netzwerkarten (Intel PRO/1000 MT-Dualanschluss-Serveradapter), Grafik Onboard, WinPE gebootet, ohne Einbauschienen, 2 Redundante Netzteile







Rental:
You may also rent this article for a limited time. Please request an offer. This possibility exists only for companies with good credit ratings.


Spare Parts:
As certified matchpart GmbH (Germany) Distributor we provide some spare Parts. Also we can try to find spareparts for you if you have been unsuccsessful to find them. If you have a demand for spare parts use the e-Mail adress service (at) brakensiek (dot) com for inquiries



This item is without packaging:
Not New Sale according to §7 of our AGB, which can bei downloaded here www.brakensiek.com/AGB.pdf The item is used.


Delivery Service:
At additional cost our Partner Systembau Dortmund GmbH & Co. KG packs and delivers this item .


Repair:
As matchpart GmbH (Germany) Partner we offer circuit board, Laserhead and Spinner Motor repair service. If you are interested in this service, we need serial number, YOM, sparepartnumber and type of error.


Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

39020 Tarox ParX 100 Miditower-Server

Tarox ParX 100 Midi Tower Server

Non-new

- Intel Pentium D (dual core) 3000MHz
- 2048 MB ECC DDR2 RAM
- 3x 80 GB SATA HDD
- DVD-ROM
- 4 x USB (2 on front)
- LSI MegaRAID SATA 150-4 Controller
- 2 x LAN on board
- ATI ES1000 onboard graphics card
- WinPE boot








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

40464 5HE Tarox Server 2x Intel Xeon 3,0GHz, 16GB RAM, 6x 70GB Ultra 320 SCSI HDD, 2x 34,4GB Ultra 320 SCSI HDD

5HE Tarox Server 2x Intel Xeon 3,0GHz, 16GB RAM, 6x 70GB Ultra 320 SCSI HDD, 2x 34,4GB Ultra 320 SCSI HDD

Not-New according to our terms of service (AGB)



Mainboard: Server Board SE7520BD2
Chipset: E7520 Lindenhurst with Intel ICH5/5R

Grafikchipset: ATI MACH64GM

Prozessor: 2x Intel Xeon 3.0GHz
Prescott 90nm
2MB L2 Cache

RAM: 8x Kingston 2GB DDR2 KVR KVR400D2S4R3/2G (all: 16GB)

Harddisks: 2x 34,4GB SCSI HDD
Manufacturer: Fujitsu-Siemens
Model: MAP3367NC

6x 70GB SCSI HDD
Manufacturer Fujitsu-Siemens
Model: MAW3073NC

Opt. Drives: 1x CD-ROM

Case: 5HE Server-Rack with
1x 5,25" Extern
1x 3,5" Extern
8x HDD-Cage with Backplane










Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

40728 USB Dongle Server myUTN-80

USB virtualization for up to eight USB dongles in Ethernet / Fast Ethernet networks!

The dongle server myUTN-80 is specially designed to provide up to eight dongles on the net ready. It offers many features to facilitate the work with dongles.

myUTN-80 operates on the "Plug & Play: Simply connect to power! The connected USB dongles can be on the UTN Manager software to manage transparent - just as if they were locally connected to your PC.

Ideal for use in virtualized environments dongles!

The dongle server myUTN-80 allows you to use USB dongles in environments where they previously could not be used as a server-based computing environments and virtualized environments using VMware, Citrix Xen and Microsoft Hyper-V.

Your benefits

SEH-80 myUTN Dongle Server

* Virtual USB cable extension via the network for flexible and independent use of up to eight USB dongle

* Save time and money: USB dongles are protected from loss, theft or damage and are always available for multiple users

* A direct, secure point-to-point connection over the network, SSL / TLS encryption, access protection and a whole range of other security features protect against unauthorized access to USB dongles

* You can assign each a different dongle users, customers or other departments, etc..


Features

* For Ethernet / Fast Ethernet (10BaseT/100BaseTX)

* 8 x USB 2.0 High Speed

* For 32/64 bit Windows networks (Windows 7, Server 2008, Vista, Server 2003, XP)

* SEH UTN Manager for quick and easy installation

* Easy configuration and management via Web Control Center

Comprehensive safety package: encryption, password protection, access control

* Regular software updates, technical support worldwide


Up to five-year warranty

Save time and money: USB dongles are protected from loss, theft or damage and are always available for multiple users

A direct, secure point-to-point connection over the network, SSL / TLS encryption, access protection and a whole range of other security features protect against unauthorized access to USB dongles

You can use any dongle another user, customer or other departments, etc. accepted.









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

40843 Transtec M2600XIS75-B

Transtec M2600XIS75-B








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

40844 19-Zoll Server

19-Zoll Server

CPU:
2x Intel Xeon 5120 1,86GHz

Mainboard:
Tyan Tempest i5000PX S5380

Raid Controller:
Intel SRU42L

DVD-Laufwerk:
SH-S182

RAM:
4x 1GB Kingston DDR2 533MHz

Power supply:
CP4-520WS

CPU-cooler:
Xilence

Floppy

4-slot backplane

HDD:
2x Fujitsu MAX3036NC 36GB








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

41438 Microsoft Windows 2000 Server

Microsofort Windows 2000 Server

Not-New according to our terms of service (AGB)

Microsoft Windows 2000 Server

Set enthält:

4 x Erste Schritte Handbuch (klein) - Umfassende Informationen zum effektiven Einsatz von Windows 2000 (Vertrieb nur mit einem neuen PC)

1 x Erste Schritte Handbuch (groß)














Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

43412 Tarox Tower-Server - 2x3,06GHz Intel XEON - 2GB RAM

2x Intel XEON CPU 3,06GHz
2GB RAM


RAID-Controller SRCU42X
5x Fujitsu MAP3367NC SCSI HDD
NEC DVD Laufwerk



FreeDOS installiert








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

43460 W&T Com-Server LC PoE 10/100BaseT

W&T Com-Server LC PoE 10/100BaseT

Not-New according to our terms of service (AGB)



PoE
10/100BaseT
1x RS232/422/485

Inklusive PSU "11020" 24V DC 220mA








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

43687 Network Engine NS-IAG 2,4GHz 2GB 2x 165GB

Network Engine NS-IAG 2,4GHz 2GB 2x 165GB

Category:
IT Systems -> High-End Server Virtualization
Manufacturer: Network Engines

Not-New









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

44176 HP Proliant DL380G5 Server Rack 2 HE

HP Proliant DL380G5 Server Rack 2 HE

Category:
IT Systems -> High-End Server Virtualization
Manufacturer: HP

Not new

Intel Quad-Core Xeon E5405 4x2000MHz
4GB DDR2 FB-DIMM-RAM
2x 73 GB SAS HDD
Slimline DVD-ROM
4x USB
HP Smart Array P400 SAS Controller
2x Lan onboard
ATI ES1000 onboard grafic chip
2 Rendundante Netzteile








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

44671 EMC Professional NET 19''- Netzwerkzeitserver

EMC Professional NET 19''

Category: IT Systems -> High-End Server Virtualization
Manufacturer: EMC²

Not-New

The PTB in Braunschweig (Germany) runs one of the most accurate atomic clocks in the world. It deviates less than one second in 300 000 years. Time and date of this clock are transmitted at a frequency of 77,5 kHz and can be received over a distance of about 2000 km from Frankfurt/Mainflingen in Germany. EMC Professional NET 19'' receives the signal and decodes time and date. EMC Professional NET 19'' was developed for the use in an electromagnetic disturbed environment. EMC Professional NET 19'' has a signal monitor with 10 LEDs. This makes a precise statement about the signal quality at the chosen location possible. In case of bad reception over a longer period of time, EMC Professional NET 19'' possesses a battery buffered real time clock so you always have a valid time.

The PTB in Braunschweig (Germany) runs one of the most accurate atomic clocks in the world. It deviates less than one second in 300 000 years. Time and date of this clock are transmitted at a frequency of 77,5 kHz and can be received over a distance of about 2000 km from Frankfurt/Mainflingen in Germany. EMC Professional NET 19'' receives the signal and decodes time and date. EMC Professional NET 19'' was developed for the use in an electromagnetic disturbed environment. EMC Professional NET 19'' has a signal monitor with 10 LEDs. This makes a precise statement about the signal quality at the chosen location possible. In case of bad reception over a longer period of time, EMC Professional NET 19'' possesses a battery buffered real time clock so you always have a valid time.

Technical Data

Device dimensions:
19'', 1 rack unit

Weight:
3 kg

Operating temperature:
5ºC - 50ºC

Plug:
Ethernet RJ45, 9 Pin D-SUB (RS232), TEMP interface (RJ11)

Network:
10/100 Mbit 10BaseT

Operating system:
Ethernet: independent from OS, RS232: Windows und Linux

Protocols:
SNTP V4, HTTP 1.1, DHCP, SNMPv1, SNMPv2c, Syslog

Power consumption:
5 W

Voltage supply:
230 V








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

44672 Aktive Antenne für EMC Professional NET

Aktive Antenne für EMC Professional NET

Category:
IT Systems -> High-End Server Virtualization
Manufacturer: Unbekannt

Not-New

This Active Antenna with BNC connector is for use with the DCF77 time receivers Expert mouseCLOCK BNC, Expert mouseCLOCK USB II BNC and EMC Professional NET (19'').
The antenna is delivered with a connection cable of 5 meter length. Please take care of a sufficient lightning protection, if you use the Active Antenna outside.
The antenna cable can be lengthened up to 150 m. We can offer custom build cables. Please ask our sales team for prices and delivery time.









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

44673 Tempsensor 7000

Tempsensor 7000

Category:
IT Systems -> High-End Server Virtualization
Manufacturer: Unbekannt

Not-New

The Temperature sensor 7000 can be easily connected with the TEMP interface at EMC Professional NET 19"
After connecting, it provides the temperature information via Webinterface and SNMP.









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

46307 EMC Professional NET 19''- Netzwerkzeitserver

EMC Professional NET 19''

Category:
IT Systems -> High-End Server Virtualization
Manufacturer: EMC²

Not-New

The PTB in Braunschweig (Germany) runs one of the most accurate atomic clocks in the world. It deviates less than one second in 300 000 years. Time and date of this clock are transmitted at a frequency of 77,5 kHz and can be received over a distance of about 2000 km from Frankfurt/Mainflingen in Germany. EMC Professional NET 19'' receives the signal and decodes time and date. EMC Professional NET 19'' was developed for the use in an electromagnetic disturbed environment. EMC Professional NET 19'' has a signal monitor with 10 LEDs. This makes a precise statement about the signal quality at the chosen location possible. In case of bad reception over a longer period of time, EMC Professional NET 19'' possesses a battery buffered real time clock so you always have a valid time.

The PTB in Braunschweig (Germany) runs one of the most accurate atomic clocks in the world. It deviates less than one second in 300 000 years. Time and date of this clock are transmitted at a frequency of 77,5 kHz and can be received over a distance of about 2000 km from Frankfurt/Mainflingen in Germany. EMC Professional NET 19'' receives the signal and decodes time and date. EMC Professional NET 19'' was developed for the use in an electromagnetic disturbed environment. EMC Professional NET 19'' has a signal monitor with 10 LEDs. This makes a precise statement about the signal quality at the chosen location possible. In case of bad reception over a longer period of time, EMC Professional NET 19'' possesses a battery buffered real time clock so you always have a valid time.

Technical Data

Device dimensions: 19'', 1 rack unit
Weight: 3 kg
Operating temperature: 5ºC - 50ºC
Plug: Ethernet RJ45, 9 Pin D-SUB (RS232), TEMP interface (RJ11)
Network: 10/100 Mbit 10BaseT
Operating system: Ethernet: independent from OS, RS232: Windows und Linux
Protocols: SNTP V4, HTTP 1.1, DHCP, SNMPv1, SNMPv2c, Syslog
Power consumption: 5 W
Voltage supply: 230 V









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

46750 Silex Hi-Speed USB Device Server SX-2000U2

Silex Hi-Speed USB Device Server SX-2000U2

Not-New according to our terms of service (AGB)


Optimal Integration
USB devices to the network!

For USB devices network resources! Every network device can use the SX-2000U2 so on they can access as if the devices are connected locally. Print, scan, fax, store - these SILEX box designed to work
with different types of USB devices is especially comfortable. Recommendations for the SX-2000U2 have appeared in such publications include: c't (15/05, p. 46)
Computer partners (36/05, p. 23)
WCM (AU, 239/05, p. 37)
InfoWeek (CH, 14/05, p. 25)
ITReseller (CH, 14/05, p. 41)

Advantages:

1 USB 2.0 Hi-Speed port
10/100Mbps-Netzwerk
Construction of up to 15 USB connection
by using
a USB hub
Retrieve status information
of connected devices and
simple configuration and use
their functions
Support tools
Scanner manufacturer and each
popular scanning software
Special security by
IP address filtering function
Also the integration of USB devices
in virtual environments
and securing USB dongles
is possible








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

47021 HP ProLiant ML 115 G5 Miditower-Server

Not-New

CPU: AMD Opteron 1214 Dual-Core 1,8GHz

Ram: DDR2 4GB

HDD: 3x 160GB

Graphic: Onboard

Drives: DVD-RAM/DVD-R/CD_RW
HP StorageWorks DAT 160 USB Streamer

Controller: HP Smart Array E220i Raid Controller









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

50888 IBM System x3250 Rack HE 1

IBM System x3250 Rack HE 1

Not-New according to our terms of service (AGB)










Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

11087 Rittal FlexRack 19" Serverschrank mit 40HE und drei Schwerlasteinschüben

Rittal FlexRack 19" server cupboard with 40HEY and three heavy duty racks

Mass:
Height: 2.12 m
Width: 0.61 m
Depth: 1.00 m
The cupboard is not new.

The cupboard is rollable and also arrestable








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

11928 APC Smart Slot AP9607, UPS Interface Expander, PD806-00012L Rev. L

APC Smart Slot AP9607, UPS Interface Expander, PD806-00012L Rev. L

Non-new

APC offers electricity supply solutions, surroundings control and distant diagnosis service. The products of APC are so conceived that they recognise proactively stream problems and correct, before it comes to system failures. APC has received worldwide numerous honourings for his innovative high-availability electricity supply solutions. Trust also you are transferred on the legendary reliability of the products by APC, where your data generated, and are stored.

Technical data

APC Smart slot interface bungee cord - distant management adaptor - smart slot - RS-232 - 2 connections

Network / interface type (coach type) smart slot

Network / connection technology cabled

Network / Data link Protocol RS-232

Network / type Distant management adaptor








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

17031 LINDY IPower Control

LINDY IPower Control

The switchable outlet for TCP/IP networks

Switch easily calculator, Router, Access-Points or every other electric device up to an achievement admission of 2000 W on the network. The switch access occurs, on this occasion, about every web browser - if requested of course also passwortgeschützt.

If requested can be fixed with the help of a provided command line tool and, e.g., the Windows-task planner's also time-steered switch processes.

• Switch achievement: maximum 2000 W / 10A
• Configureable about browser or provided configuration software
• integrated (switchable) DHCP client - if in the net a DHCP server runs configures to himself the device himself
• Passwortgschützter access
• Network binding: Ethernet 10Base-T (completely enough on account of very low data amounts to be transferred)
• Measures (L x B x H): 135 x 25 x 65 mm








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

19649 Rittal Top-Therm Klimagerät für Dachaufbau

Top-Therm climate device for roof construction

Climate device inclusive controllers
Temperature area: +20 °C - + 55 °C,
Cold means free of CFC
Chill achievement: 2000 W
Colour RAL 7035








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20268 ACOME Installationskabel S/STP Cat.7

ACOME Duplex Instkabel 500m C7
SSTP-DPX/2x4P23 900MHz, halogenfrei u.
flammenwidrig, grün
Lieferbar ab KW 40/05








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20269 Telegärtner C6 PatchPanel 24-Port 19 Zoll

Telegärtner C6 PatchPanel 24-Port 19"

light-grey, 250MHz








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20272 Telegärtner C6 Dose VAD AP KE8 8 reinweiss

Telegärtner C6 Dose VAD AP KE8/8 perlweiß

250MHz








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20274 GVT-0300 mini-GBIC SX LC Transceiver SFP

GVT-0300 mini-GBIC SX/LC Transceiver SFP

550m multi-mode LC, LevelOne








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20275 LWL Patchkabel 1.0m

LWL Patchkabel LC/LC 50/125μ 1,0m

• Wirespezification: I-VH 2 x 1 G
• Multimode
• Plug: Keramik-Ferrule
• Mantel: Halogenfree and flameresistant
• Wirecolor: grey(50mµ), orange(62,5mµ)
• Individually wrapped in Polybag
• 10 Stck. in Hardcoverbox for safe trasport
• Every wire with measuring/-testreport









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20276 LWL Patchkabel 80.0m

LWL Patchkabel LC/LC 50/125μ 80,0m

• Wirespezification: I-VH 2 x 1 G
• Multimode
• Plug: Keramik-Ferrule
• Mantel: Halogenfree and flameresistant
• Wirecolor: grey(50mµ), orange(62,5mµ)
• Individually wrapped in Polybag
• 10 Stck. in Hardcoverbox for safe trasport
• Every wire with measuring/-testreport








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20277 GNC-0103SX LAN Adapter Fiber 1000SX-SC

GNC-0103SX LAN Adapter Fiber 1000SX-SC

32/64bit








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20278 LWL Patchkabel 60.0m

LWL Patchkabel LC-SC 50/125μ 60,0m

• Kabelspezifikation: I-VH 2 x 1 G
• Multimode
• Stecker: Keramik-Ferrule
• Mantel: Halogenfrei und flammwidrig
• Kabelfarbe: grau(50mµ), orange(62,5mµ)
• einzeln verpackt in equip Polybag
• 10 Stck. in transportsicherer Hardcoverbox
• Jedes Kabel mit Mess/-Prüfprotokoll









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20279 GNC-0106T-V3 LAN Adapter 10 100 1000Mbps

GNC-0106T-V3 LAN Adapter 10/100/1000Mbps

64/32Bit, LevelOne








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20316 APC NetShelter VX 19" 42 HE Serverschrank

APC NetShelter VX 19" 42 HE Serverschrank

19”-Rack for your entire IT environment (servers, network and storage devices)

NetShelter VX is APC's leading Rack solution.NetShelter VX solve problems faced by IT managers face today, with new features that enable the development of more efficient IT environment.
Due to larger server depths combined with the demand for easier cable routing and power distribution units were deeper Racks needed. At the same time, due to higher power consumption, required cabinets with an optimized ventilation.Different IT requirements have led to the need for diverse Rack sizes and options.

Producttyp Rack
Rack-size 19"
Height (Rack-Units) 42 U
Material Steel
Dimensions (width x depth x height) 59.6 cm x 107.4 cm x 207 cm
weight 162.8 kg
Herstellergarantie 5 Jahre Garantie









Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

20317 APC NetShelter VX 19" 42 HE Erweiterungsschrank

APC NetShelter VX 19" 42 HE Erweiterungsschrank

The expansion of the Rack NetShelter VX series (without side panels)1070 mm tiefe Rack-Gehäuse mit fortschrittlicher Kühlung, Stromverteilung, Kabel- Management und Sicherheits-Features für Server-, Netzwerk- und Telekommunikationsanwendungen in IT-Umgebungen.

Inkl.: Baying-Kit, Rollen, Türen, Schlüssel, Ausgleichsfüße, Decke, Benutzerhandbuch

Gewicht 128 kg
Höhe 207 cm
Breite 58 cm
Tiefe 107 cm
Tragfähigkeit 907/907 kg (statische/dynamische Last)








Brakensiek Systemhaus GmbH & Co KG
Tel./Phone: +49(0)231.9850010 • Fax : +49(0)231.9852000 • info@brakensiek.comwww.brakensiek.com
Produktliste aktualisiert am/last update: 12.10.2017
Mehr Informationen/more info

 

Page 1 from 51
Deutsche Sprache

Es gelten unsere AGB (www.brakensiek.com/AGB.pdf). Es handelt sich bei unseren Angeboten um Gebrauchtsysteme, wenn nicht anders angegeben. Irrtum/ Änderungen/ Zwischenverkauf vorbehalten. Lokale Steuern müssen vom Kunden getragen werden.
Fax: +49 231 9852000

Englische Sprache

Our Terms and Conditions (www.brakensiek.com/AGB.pdf) apply. The listed products are used systems as long not stated otherwise. Mistakes/ Changes/ Subject to prior sale reserved. Local taxes are to be paid by the customer.
Fax: +49 231 9852000

Login | Register for newsletter | Impress | Terms and Conditions | Contact | Links | Initialise remote control