| 38823
| |
 |
QUATO Intelli Proof 240 LED excellence | 
QUATO Intelli Proof 240 excellence LED
108% NTSC gamut, Extended Wide Proof Monitor with 16-bit 3D hardware calibration, RGB-LED backlight and native 10-bit signal processing
Thanks to a 108% NTSC color gamut, high performance surface balance for the panel and LED backlight, high-precision 16-bit hardware calibration and 3D native 10bit signal processing is the Intelli Proof 240 excellence LED tuned to the needs of arts professionals, photographers and designers. He also is visible thanks to Faroudja DCDi and HDCP support also perfect for video professionals. The huge gamut of the monitor covers beside the pressure spectrum on a contract level proof from the main color and video standards. Through the simulation of sRGB, Adobe RGB, SMPTE-C and BT.709, the monitor can also be adapted to individual needs. The built-in iColor Display UDACT allows any time an objective statement about the accuracy of the calibration.
- Extended S-IPS TFT Wide Color Gamut RGB-LED backlight
Technology and native 10-bit resolution
- ADC - active surface balance with 105 points and 81 field
LED stabilization
- Direct control of the 3x 16bit 3D LUT with 48-bit (3x16bit)
Calibration precision
- 8bit DVI (HDCP) and 10bit Display Port connection, max. 250 cd/m2
Luminance, contrast 1000:1
- Meets the requirements in the Fogra as Class A monitor frame
FograCert of soft proofing systems
- Color display calibration software including UDACT and
Hood included
- Warranty:
60 months (only Austria and Switzerland),
On-Site Business Service (Germany only)
Precise color calibration
The Intelli Proof 240ex LED has a 16bit 3D LUT. Instead of the usual 100-256 degrees of this monitor is calibrated with up to 65,535 levels per channel. The 3D LUT technology enables precise color space simulations and optimize the linearity. In addition, the monitor can reproduce by the native 10-bit color depth 1024 gray or billions of colors. This allows gentle curves and a frame modulation for soft proofing on contract proof level.
Software Features
IColor Display software not only controls the monitor, but offers the optimization on the calibration results, an adaptation of several monitor each other. be tested after calibration, the LUT and matrix profile for accuracy. This test is supplemented by the analysis built. The a / b-view of the monitor's gamut in comparison to other color spaces, gives information about the size of the color space or the agreement to a selectable output profile.
Soft Proof
Unlike other calibration results, the Intelli Proof 240 excellence LED detected by the use of a special backlight with 1620 RGB LEDs completely not only the Adobe RGB color space, but also the ideal for proofing and archiving purposes ECI-RGB color space largely dependent. This is the
Monitor for both the simulation of all conventional printing methods to get contract-level and for working with Adobe RGB and eciRGB data in the photographic workflow.
Specifications
Panel Type
- Extended WCG S-IPS (H-IPS) with RGB LED BLU
Gamutgröße and consistency
- 108% NTSC (CIE1931) / 133% (CIE1976)
- 100% of ISO Coated v2 (UDACT)
- 96% ECI-RGB compatibility
- 100% Adobe RGB compatibility
Panel size, speed, angle
- 24 "- 60cm, 51.8cm x 32.4cm visible
- 12ms (6ms G-G), 94dpi - 0.27mm pixel pitch,
- 178 ° horizontal / vertical
Contrast and luminance
- 1000:1 (typical), 400cd/m2 (typical)
Native resolution and color depth
- 1,920 x 1,200 pixels @ 30bit (2.3 megapixels)
Surface balance
- Area Dimming Control (ADC) with active
- 105-field luminance and color correction
Pixel error class
- ISO 13406-II, no defects in the center
Frequency response
- Horizontal 30 - 92kHz, vertical 50 - 85Hz
- In addition 720p, 1080i / p, PAL / NTSC
Connection
- 1x digital DVI-D (HDCP), 1x digital / analog
- DVI-I (HDCP), 1x DisplayPort (10bit), 2x USB
- 2.0 Hub, USB-calibration, 100mm VESA mount
Ergonomics
- Turning range: -75 ° to +75 °
- Swivel range: -5 ° to +15 °
- Adjustable (height): 14 cm
System requirements
- Mac OS X 10.4
- Windows XP 32, Vista 32/64
Warranty
- 60 months (DACH)
- On-site business services (Germany only)
Size and weight
- 602 mm x 520 mm x 220 mm (without bezel)
- 15 kg (without lens)
Energy consumption
- 60w mode, <2W standby, 0w of (typical)
- Does the EUP Regulatio
EMI Certified
- TCO 95, TÜV type approved, FCC, CE, UL
Calibration
- Automatic USB hardware calibration of the 3x 16bit 3D look-up
Table, 48 bit precision, accurate simulation of sRGB, NTSC, and Adobe
RGB, UDACT and SWOP certification
Measurement Sensor
- Optional 4-channel Silver Haze Pro Colorimeter
Supported devices
- EyeOne series (Spectro & Colorimeter), Silver
- Haze Pro colorimeter, X-Rite DTP-94, Monaco
- Optix XR, Datacolor / ColorVision Spyder 2 / 3
AVAILABLE UNTIL MID / END OF MAY
Optional 4-channel Silver Haze Pro Colorimeter
HEK without VAT: € 1,930.00
| |
