Logo SilverFast Logo Logo
Firmware 3 47
Article number: 32839
Listed in category: IT Systems / Enterprise Storage Solutions > Firmware 3 47 from brakensiek.de
Firmware 3.47

Intelligent Firmware with Infortrend Smart Technologies
Derived from more than ten years of experience in RAID storage design, Infortrend's subsystems are based on their own proprietary firmware codes that help safeguard disk array storage and provide a clearly defined, high performance standard in terms of maximum protection against failures and fast I/O transmission speeds. These intelligent firmware functions—IOSmart, DrvSmart, and SysSmart—are designed to strike a balance between system performance and data availability for every customer environment, from small organizations to large enterprises.

Highlights

* Drive spin down (for subsystems using SATA drives)
- Power consumption commands support
* AV optimization mode
* Drive-side cache Enable or Disable (SATA only)
* User-selectable Restore/Un-restore password from disk
* Maximum 32 LDs/16 LVs/64 Partitions/1024 LUNs
* Maximum 512/1024 KB stripe size
* Supports RAID6
* LD and stripe size migration


Infortrend Smart Technologies
IOSmart technologies consist of specific functions and configurable options that control various I/O characteristics in order to meet the rapidly increasing requirements of today's applications.
DrvSmart mechanisms ensure data integrity by correcting minor defects, increasing reaction time, and allowing more time to prepare a rebuild while minimizing performance impact.

SysSmart combines enclosure monitoring and firmware management capabilities to minimize the chance of downtime caused by hardware failures. With SysSmart, Infortrend's subsystems are smartly managed and guarded against extreme operating conditions.

New Features

Drive Spin Down
The Drive Spin Down command allows hard drives enter idle state after a configurable period of time with no I/O requests directed to the hard drives. Enable this command allows drive only spin when needed that greatly reduces power consumption by approximately 36KW/hours and further decreases operational cost. This feature ensures solid data protection while retain healthy drives and energy saving especially in a disk-to-disk (D2D) application.

AV Optimization Mode & 512/1024 KB Stripe Size Option
The AV Optimization mode maximizes data throughput performance for applications requiring continuous reading such as audio/video streaming. Firmware 3.47 supports up to 1024 stripe size allowing the RAID controller to retrieve data files efficiently. Different optimization modes have different default stripe sizes to meet most applications' requirements.

Maximum LD/LV/Partition/LUN Values
With over 1GB cache memory installed, the EonStor subsystems support a maximum of 32 LDs, 16 LVs, 64 partitions, and 1024 LUNs giving users remarkable configuration choices. This support surpasses the industry standard and reflects the incomparable core technology of Firmware 3.47.

RAID6
RAID6 is similar to RAID5 but provides protection against double disk failures and failures while a single disk is rebuilding. If a second disk fails with RAID 6, data can be reconstructed onto a second drive. RAID6 provides a significantly higher redundancy level with its ability to withstand the failure of two member drives at the same time.
RAID Migration
The RAID Migration function supports switching logical drive between RAID5 and RAID6 with selective stripe sizes for better performance. In the event that additional physical disks are added to the RAID subsystem, switching to RAID6 can further guarantee data reliability.

Product Availability

Firmware v3.47 was first included on the EonStor A16F-G2422 FC-4G to SATA-II, single controller subsystem and will be available on the company's other ASIC266 products such as the ES A24U-G2421 and the recently announced ES A24F-R/G2224 RAID subsystems. These products are available through Infortrend’s worldwide network of OEMs, distributors and storage integrators.







* Zusicherungen und Markennamen:
We are not authorized reseller of this brand we use the names only for description


Contact:
Your contact person: Tim Brakensiek
product request: Firmware 3 47

Ampel gebrauchtprodukt     last update:   20.02.2021
Topimage
worldprintmarket.com

Visit the new marketplace for prepress, press und postpress: www.worldprintmarket.com
Optimize your cash-flow by selling your no longer required machines.
Intellitrax

X-Rite IntelliTrax System - automatic spectral color measurement system for sheet, and roll-feed printing units and package-printing units according to PSO for Heidelberg, MAN Roland, KBA, Ryobi, Komori, Wifag, Mitsubishi. In at least 15 seconds you will measure the print control strip and receive a graphic printout of what to change in which zone to meet your deposited standard e.g. PSO.
matchflow adjust

With Matchflow-adjust you can share a pdf-document over the internet for detailed checking and annotation. In this document all project-members (depending on their access-rights) can acquire comments and modifications. By using the "Generated Print Report Button", you generate an new PDF which contains annotation number, username, date, annotation text and type. All comments are saved in a database. So the whole coordination-process is reconstructable at any time. You will save proof and dispatcher costs an maybe need only one final proof. We recommend to insert a flat PDF which can be written from any common workflow system. AGFA Apogee, Heidelberg Prinect, Creo Prinergy, Di Plot, if this function is enabled.
FireWire
SilverFast

Order your FR1SX Firewire-Adapter offer here.
A CD-ROM with actual SilverFast AI Studio + HDR Demo-Version is included in delivery. Please specify your scanner type. We are sure that only an perfect maintained Linotype Hell/Heidelberg Chromagraph S3300/S3400, Nexscan F4100/F4200, Primescan 7100, 8200, 8400 and Tango/Tango XL sowie Topaz HighEnd scanners provide quality and are able to reach Delta E 1 scales after reprofiling. Therefore we provide spare parts and preventive service. Service contracts are possible. After service we peform an new DIN VDE 701 report.
PDF

Dowload and print this article as PDF data sheet: Data Sheet Firmware 3 47
Terms and conditions:
Please only contact us via our registration form and only if you are a business person yourself. Every offer is subject to prior sale and includes your acceptance to our terms & conditions Terms and conditions (AGB) All logos and trademarks on this site are the property of their respective owners.

You will always receive an invoice including tax, which can be paid via wire transfer, in advance or cash. If you register on paypal, you may also pay by charging your paypal account with your credit card. If you are an EU member and you have a validated tax number which can be validated here: VIES VAT number validation / MwSt.-Informationsaustauschsystem MIAS) Validierung der MWSt.-Nummer then you pay tax-free. If you are from outside the EU, you can only pay tax-free, if the export is done with the transport company, called 'Schenker'. If you are not using 'Schenker', we cannot guarantee that we will get the export confirmation in time. In that case, you have to pay tax and you get it.

The website was generated by matchflow and the PDF version was released by matchflow-adust: communicate, control, confirm. Matchflow-adjust provides browser-based PDF correction and PDF annotation with web2print features.
Login | Subscribe to Newsletter | Imprint | Terms and Conditions(AGB) | Contact | Links | Remote Control Win Mac| Stocklist | Purchase List |