Logo SilverFast Logo Logo
Linotype-Hell Linotronic 560
Article number: 34738
Listed in category: Prepress / Computer To Film / Imagesetter > Linotype-Hell Linotronic 560 from brakensiek.de
Linotype-Hell Linotronic 560

The alternative to Screen Katana, screen 3050 or Heidelberg Hercules Avantra 30 or if no punch is needed and to get along with the material width.

Non-new

Specifications:
System Description: Precision laser recorder
Dimensions (W x H x D): 103 x 95.5 x 81.5 cm
Image area: 457.5 mm, 108 pica (exposure length depending on application)
Resolution: 167-1333 pixels / cm
Speed: 120.4 to 7.5 cm / min

NV parameters such as those necessary for operation with a Harlequin 7.2 RIP are:

To arrive at these values ​​need to expand the Rec 1 card and put the bridge B3, and starting a special key combination. This should take only an experienced service technician.

Setting Li5
9600
8 bits
1 stop bit
No parity
RTS / CTS

Setting Li2
By Panel and Li5
Asynchronous
16/8

Menu ADUJST PARAMETERS:

PG_RES $ 1E 0000
PG_TFAK ($ 16F9)
OPTIC ($ 9D)
SOL ($ AU)
FLM_RES $ 140,000
FLM_TFAK ($ B80)

Menu MACHINE PARAMETERS:

ECLOSZ 315000000
PG_RPM 3344
PG_MAX 4600
PG_MIN 1400
TC_RPM 1442
TC_GN 1800
SOL_T1 450
SOL_T2 550
IM_CUT 132 000
WP_RAM 8
NC_1 $ 0

SOFTWARE PARAMETERS Menu

EEPROM_BLOCK 0
V_ADV_CUT 220 000
V_ADV_OLP 150 000
V_OLP_MAX 800 000
V_OLP_MIN 200 000
V_TKUP 30000000
SW_YVAL 2000
SW_DELAY 0
POWER_Time 0
EN_REC_TIME $ FF
STP_MMZM $ 0
SS_MODE 0
NC_2 $ 0

Menu MACHINE-TYPE

Recorder R1
Set1 560

Resolution Set Menu

X_Res $ 78,000
OD_Res $ F0000
OP_RNG $ A
DS_RNG $ 6

Menu-Adjust hardware

Density 450
Res 1333 l / cm

Type of material for test run

F-Width = 456 mm
F-Thik 0.1

Machine test instructions:

Press Service
Switch on the machine
Press Enter 3 times

If no error is present then at the end
P00000/E00269 / # 710 / C
Duration: 15 minutes


We recommend any change to update the NV-RAM data, since the buffer Battterie on the motherboard of the machine is empty and then at some point, the parameters are gone. These values ​​will only work with this machine. For other machines, the values ​​must be adjusted may be very costly. This requires an oscilloscope my 2x 100 Mhz, about 2 days and plenty of rest and patience.

Note: The on / off switch disconnects the power supply is not 100%. So please pull the plug from the socket in the evening around the machine to protect against surges.







* Zusicherungen und Markennamen:
We are not authorized reseller of this brand we use the names only for description


Contact:
Your contact person: Tim Brakensiek
product request: Linotype-Hell Linotronic 560

Ampel gebrauchtprodukt     last update:   15.09.2021
Topimage
worldprintmarket.com

Visit the new marketplace for prepress, press und postpress: www.worldprintmarket.com
Optimize your cash-flow by selling your no longer required machines.
Intellitrax

X-Rite IntelliTrax System - automatic spectral color measurement system for sheet, and roll-feed printing units and package-printing units according to PSO for Heidelberg, MAN Roland, KBA, Ryobi, Komori, Wifag, Mitsubishi. In at least 15 seconds you will measure the print control strip and receive a graphic printout of what to change in which zone to meet your deposited standard e.g. PSO.
matchflow adjust

With Matchflow-adjust you can share a pdf-document over the internet for detailed checking and annotation. In this document all project-members (depending on their access-rights) can acquire comments and modifications. By using the "Generated Print Report Button", you generate an new PDF which contains annotation number, username, date, annotation text and type. All comments are saved in a database. So the whole coordination-process is reconstructable at any time. You will save proof and dispatcher costs an maybe need only one final proof. We recommend to insert a flat PDF which can be written from any common workflow system. AGFA Apogee, Heidelberg Prinect, Creo Prinergy, Di Plot, if this function is enabled.
FireWire
SilverFast

Order your FR1SX Firewire-Adapter offer here.
A CD-ROM with actual SilverFast AI Studio + HDR Demo-Version is included in delivery. Please specify your scanner type. We are sure that only an perfect maintained Linotype Hell/Heidelberg Chromagraph S3300/S3400, Nexscan F4100/F4200, Primescan 7100, 8200, 8400 and Tango/Tango XL sowie Topaz HighEnd scanners provide quality and are able to reach Delta E 1 scales after reprofiling. Therefore we provide spare parts and preventive service. Service contracts are possible. After service we peform an new DIN VDE 701 report.
PDF

Dowload and print this article as PDF data sheet: Data Sheet Linotype-Hell Linotronic 560
Terms and conditions:
Please only contact us via our registration form and only if you are a business person yourself. Every offer is subject to prior sale and includes your acceptance to our terms & conditions Terms and conditions (AGB) All logos and trademarks on this site are the property of their respective owners.

You will always receive an invoice including tax, which can be paid via wire transfer, in advance or cash. If you register on paypal, you may also pay by charging your paypal account with your credit card. If you are an EU member and you have a validated tax number which can be validated here: VIES VAT number validation / MwSt.-Informationsaustauschsystem MIAS) Validierung der MWSt.-Nummer then you pay tax-free. If you are from outside the EU, you can only pay tax-free, if the export is done with the transport company, called 'Schenker'. If you are not using 'Schenker', we cannot guarantee that we will get the export confirmation in time. In that case, you have to pay tax and you get it.

The website was generated by matchflow and the PDF version was released by matchflow-adust: communicate, control, confirm. Matchflow-adjust provides browser-based PDF correction and PDF annotation with web2print features.
Login | Subscribe to Newsletter | Imprint | Terms and Conditions(AGB) | Contact | Links | Remote Control Win Mac| Stocklist | Purchase List |