ADAPTEC RAID 1220SA RoHS Kit PCI Express
Article number: 35147
Listed in category: IT Systems / Enterprise Storage Solutions > ADAPTEC RAID 1220SA RoHS Kit PCI Express from brakensiek.de
Adaptec RAID 1220SA RoHS Kit PCI Express
Non-new
The Adaptec RAID 1220SA card is a PCI Express x1 controller featuring Adaptec HostRAID component, a RAID technology that maximizes system performance and uptime is achieved. The Adaptec 1220SA supports up to two Serial ATA drives with 3Gb / s Native Command Queuing (NCQ) and offers RAID levels 0, 1, and JBOD (individual drives to a single drive). The Adaptec 48-bit LBA support (LBA: Logical Block Addressing) is the use of disk drives with a capacity of over 137 GB.
Product name: Adaptec RAID 1220SA - Storage controller (RAID) - SATA-300 - PCI Express x1
general
Device Type: Storage controller (RAID) - plug-in card - low profile
Interface Type: PCI Express x1
Depth: 8.5 cm
Height: 6.4 cm
Expansion / connectivity
Interfaces: 2 x storage - Serial ATA-300 - Serial ATA 7-pin (within)
Compatible Slots 1 x PCI Express x1 - low-profile
Miscellaneous
Cables Included: 2 x Serial ATA cable - 1 m
Compliant Standards: RoHS
Software / System Requirements
Software Included: Drivers & Utilities, Adaptec Storage Manager
OS Required: Microsoft Windows 2000, Red Hat Linux, SuSe Linux, Microsoft Windows XP, Microsoft Windows Server 2003, Novell NetWare 6.5
environmental conditions
Min Operating Temperature: 0 ° C
Maximum operating temperature: 55 ° C
Mass Storage Controller
Controller Interface Type: Serial ATA-300
Data Transfer Rate: 300 MBps
Supported Devices: Hard drive, disk array (RAID)
Number of Channels: 2
Max Storage Devices Qty: 2
RAID Level: RAID 0, RAID 1, JBOD
* Zusicherungen und Markennamen:
We are not authorized reseller of this brand we use the names only for description
Non-new
The Adaptec RAID 1220SA card is a PCI Express x1 controller featuring Adaptec HostRAID component, a RAID technology that maximizes system performance and uptime is achieved. The Adaptec 1220SA supports up to two Serial ATA drives with 3Gb / s Native Command Queuing (NCQ) and offers RAID levels 0, 1, and JBOD (individual drives to a single drive). The Adaptec 48-bit LBA support (LBA: Logical Block Addressing) is the use of disk drives with a capacity of over 137 GB.
Product name: Adaptec RAID 1220SA - Storage controller (RAID) - SATA-300 - PCI Express x1
general
Device Type: Storage controller (RAID) - plug-in card - low profile
Interface Type: PCI Express x1
Depth: 8.5 cm
Height: 6.4 cm
Expansion / connectivity
Interfaces: 2 x storage - Serial ATA-300 - Serial ATA 7-pin (within)
Compatible Slots 1 x PCI Express x1 - low-profile
Miscellaneous
Cables Included: 2 x Serial ATA cable - 1 m
Compliant Standards: RoHS
Software / System Requirements
Software Included: Drivers & Utilities, Adaptec Storage Manager
OS Required: Microsoft Windows 2000, Red Hat Linux, SuSe Linux, Microsoft Windows XP, Microsoft Windows Server 2003, Novell NetWare 6.5
environmental conditions
Min Operating Temperature: 0 ° C
Maximum operating temperature: 55 ° C
Mass Storage Controller
Controller Interface Type: Serial ATA-300
Data Transfer Rate: 300 MBps
Supported Devices: Hard drive, disk array (RAID)
Number of Channels: 2
Max Storage Devices Qty: 2
RAID Level: RAID 0, RAID 1, JBOD
* Zusicherungen und Markennamen:
We are not authorized reseller of this brand we use the names only for description
Contact:
Your contact person: Tim Brakensiek