Logo SilverFast Logo Logo
Konica Minolta FD-7
Article number: 45483
Listed in category: Measurement / Spectral Material Analysis > Konica Minolta FD-7 from brakensiek.de
Konica Minolta FD-7

Product description

Next generation Spectrodensitometer with Measurement Condition M1

The Konica Minolta FD-7 is the first Spectrodensitometer with standard-compliant (ISO 13655) Measurement Condition M1. The optional measurement software basICColor catch all is highly automated and can be configured for measurement tasks so that one (!) mouse click suffices to start the measurement job. The FD-7 measures either reflective or emissive and so it is also suitable for adjusting viewing cabinets such as the basICColor diLIGHT or basICColor LEDlight.

Measurement Condition M1

Konica Minolta's patented VFS (Virtual Fluorescence Standard) technology, combined with latest LED illumination technology, enables L*a*b* measurements corresponding to ISO 13655 Measurement Condition M1 (CIE Illuminant D50).

In addition, colour measurements corresponding to ISO 13655 Measurement Conditions M0 (CIE Illuminant A) and M2 (illumination without UV-excitation (“UV-Cut”)) are also possible.
Spot/Strip Mode

Through the integrated display the FD-7 can be used independently from the computer for measuring single colors. Connected to the computer, all profiling targets and control wedges such as the Ugra/FOGRA media wedge or the ECI/bvdm GrayCon strip can be measured in strip mode (scan). With basICColor catch all (optional) you will receive quality control PDF reports for proof prints and offset prints (PSO/ISO) and comprehensive statistics and you can interface to the on-line QM system iQIP®
Lightweight & Compact
The compact body of the FD-7 weighs about 350g, and even with the target mask attached it weighs just 430g, far less than conventional instruments. This makes it easier to carry out multiple routine measurements in a production environment.


• Illumination/viewing system: 45°a: 0°(annular illumination)*1
• Conforms to CIE No. 15, ISO 7724/1, DIN5033 Teil 7, ASTM E 1164, and JIS Z 8722 Condition a for reflectance measurements.
• Spectral separation device: Concave grating
• Wavelength range: Spectral reflectance 380 to 730 nm
• Spectral irradiance: 360 to 730 nm
• Wavelength pitch: 10 nm
• Half bandwidth: Approx. 10 nm
• Measurement area: Ø3.5mm
• Light source: LED
• Measurement range: Density: 0.0D to 2.5D; Reflectance: 0 to 150%
• Short-term repeatability: Density: σ0.01D
• Colorimetric: Within σΔE00 0.05 (When white plate is measured 30 times at 10-second intervals after white calibration has been performed)
• Inter-instrument agreement: Within ΔE00 0.3 (Average of 12 BCRA Series II color tiles compared to values measured with a master body under Konica Minolta standard conditions)
• Measurement time: Approx. 1.4 s (single-point reflectance measurement)
• Displayed values: Colorimetric values, colour-difference values, density values, density-difference values, dot area ratio, dot gain, PASS/FAIL judgment, illuminance, correlated colour temperature
• Measurement conditions: Corresponding to ISO 13655 Measurement Conditions M0 (CIE Illuminant A), M1 (CIE Illuminant D50), and M2 (illumination with UV-cut filter); User-defined illuminant
• Illuminants: A, C, D50, ID50, D65, ID65, F2, F6, F7, F8, F9, F10, F11, F12, User-defined illuminant
• Observers: 2° Standard Observer, 10° Standard Observer
• Colour spaces: L*a*b*, L*C*h, Hunter Lab, Yxy, XYZ and colour-difference in these colour spaces
• Colour-difference equations: ΔE*ab (CIE 1976), ΔE*94 (CIE 1994), ΔE00 (CIE 2000), ΔE (Hunter), CMC (l:c)
• Indexes: WI (ASTM E313-96); Tint (ASTM E313-96); ISO Brightness (ISO 2470-1); D65 Brightness (ISO 2470-2); Fluorescence index
• Density: ISO Status T, ISO Status E, ISO Status A, ISO Status I; DIN16536
• Data Memory: Colorimetric target data: 30 data; Density target data: 30 data
• Display language: English, French, German, Spanish, Japanese, Chinese (simplified)
• Scanning measurements*2: Scanning measurement of a colour chart can be performed.
• Interface: USB 2.0
• Output data*2: Displayed values; Spectral reflectance data; Spectral irradiance data
• Power: Rechargeable internal lithium-ion battery (Number of measurements per charge: Approx. 2,000 when new); AC adapter; USB bus power
• Dimensions (W × D × H): 70 × 165 × 83mm (Body only); 90 × 172 × 84mm (With target mask attached)
• Operating temperature/humidity range: 10 to 35°C, 30 to 85% relative humidity with no condensation
• Storage temperature/humidity range: 0 to 45°C, 0 to 85% relative humidity with no condensation

*1 Illumination for wavelengths under 400nm is unidirectional.
*2 Available when using basICColor catch all on Macintosh or Windows System.

* Zusicherungen und Markennamen:
We are not authorized reseller of this brand we use the names only for description

Your contact person: Tim Brakensiek
product request: Konica Minolta FD-7

Ampel new products     last update:   16.07.2019

Visit the new marketplace for prepress, press und postpress: www.worldprintmarket.com
Optimize your cash-flow by selling your no longer required machines.

X-Rite IntelliTrax System - automatic spectral color measurement system for sheet, and roll-feed printing units and package-printing units according to PSO for Heidelberg, MAN Roland, KBA, Ryobi, Komori, Wifag, Mitsubishi. In at least 15 seconds you will measure the print control strip and receive a graphic printout of what to change in which zone to meet your deposited standard e.g. PSO.
matchflow adjust

With Matchflow-adjust you can share a pdf-document over the internet for detailed checking and annotation. In this document all project-members (depending on their access-rights) can acquire comments and modifications. By using the "Generated Print Report Button", you generate an new PDF which contains annotation number, username, date, annotation text and type. All comments are saved in a database. So the whole coordination-process is reconstructable at any time. You will save proof and dispatcher costs an maybe need only one final proof. We recommend to insert a flat PDF which can be written from any common workflow system. AGFA Apogee, Heidelberg Prinect, Creo Prinergy, Di Plot, if this function is enabled.

Order your FR1SX Firewire-Adapter offer here.
A CD-ROM with actual SilverFast AI Studio + HDR Demo-Version is included in delivery. Please specify your scanner type. We are sure that only an perfect maintained Linotype Hell/Heidelberg Chromagraph S3300/S3400, Nexscan F4100/F4200, Primescan 7100, 8200, 8400 and Tango/Tango XL sowie Topaz HighEnd scanners provide quality and are able to reach Delta E 1 scales after reprofiling. Therefore we provide spare parts and preventive service. Service contracts are possible. After service we peform an new DIN VDE 701 report.

Dowload and print this article as PDF data sheet: Data Sheet Konica Minolta FD-7
Terms and conditions:
Please only contact us via our registration form and only if you are a business person yourself. Every offer is subject to prior sale and includes your acceptance to our terms & conditions Terms and conditions (AGB) All logos and trademarks on this site are the property of their respective owners.

You will always receive an invoice including tax, which can be paid via wire transfer, in advance or cash. If you register on paypal, you may also pay by charging your paypal account with your credit card. If you are an EU member and you have a validated tax number which can be validated here: VIES VAT number validation / MwSt.-Informationsaustauschsystem MIAS) Validierung der MWSt.-Nummer then you pay tax-free. If you are from outside the EU, you can only pay tax-free, if the export is done with the transport company, called 'Schenker'. If you are not using 'Schenker', we cannot guarantee that we will get the export confirmation in time. In that case, you have to pay tax and you get it.

The website was generated by matchflow and the PDF version was released by matchflow-adust: communicate, control, confirm. Matchflow-adjust provides browser-based PDF correction and PDF annotation with web2print features.
Login | Subscribe to Newsletter | Imprint | Terms and Conditions(AGB) | Contact | Links | Remote Control Win Mac| Stocklist | Purchase List |