Logo SilverFast Logo Logo
X-Rite 530 Spektraldensitometer
Article number: 46251
Listed in category: Measurement / Spectrophotometer > X-Rite 530 Spektraldensitometer from brakensiek.de
X-Rite 530 Spectrodensitometer

Advanced spectrodensitometer for pressroom, ink lab or testing lab providing spectral, color, and density measurements. Connects to X-Rite’s IntelliTrax auto scanning system, and complements X-Rite’s ColorMaster, InkFormulation and other software applications.

Functions

[X] Density

[X] Color*

[X] Match*

[X] Dot

[X] Trap

[X] Print Contrast

[X] Hue Error / Grayness

[X] Paper Indices

[X] Compare

[X] Electronic Function Select (EFS)

*Contains reflectance values ​​and graphical representation


Specifications

Measurement conditions

Illuminant types:                        A, C, D50, D55, D65, D75, F2, F7, F11, F12
Standard observers:                   2°, 10°
Response types:                         ISO Status T, ISO Status E, ISO Status I, ISO Status A, G, Tx, Ax, Ex, Hi-Fi


Measurement technology

Spectral range:                         400nm to 700nm
Measurement geometry:                  45°/0° per ANSI, DIN & ISO Standards
Measurement aperture:                  3.4mm (.13in) standard
                                    2.0mm (.078in) optional
                                    6.0mm (.236in) optional
                                    Micro-Spot: 1.6mm (.063in, H) x 3.2mm (.125in, W) optional
Light source:                              Gas Pressure @ 2856°
Physical filters:                        No (incandescent lamp light), Optional Polarized, Optional UV cutoff
Measurement time:                        Approx. 1.4 seconds per single measurement
                                    Approx. 0.9 seconds in Speed Read mode
Measurement range:                  0.00D–2.5D; 0–160%R
Inter-instrument agreement:            ±0.01 D or 1% for typical printing processes
                                    0.40 ΔE CMC MAX on 12 BCRA Tiles
Density repeatability:                   ±0.005D for 0.00–2.00D*
                                    ±0.010D for 2.00–2.50D*
                                    *Polarized Yellow: ±0.010D for 0.00–1.80D
                                    Micro-Spot: ±0.010D for 0.0–1.8D


Data interface

Serial data interface:                   RS-232 with baud rates 1200 to 57.6K


Power supply

Power source:                         Ni-MH battery pack, 4.8v rated @ 1650mAh
Charge time:                         Approximately 3 hours


Environmental

Operating temperature:                  +10°to +35°C
Humidity:                               30%–85%RH non condensing


Mechanical data

Physical dimensions:                  Length: 197mm (7.8in) Width: 76mm (3.0in) Height: 81mm (3.2in)
Weight:                              1050 grams (2.3lbs.)














X-Rite 530 Spectrodensitometer

Advanced spectrodensitometer for pressroom, ink lab or testing lab providing spectral, color, and density measurements. Connects to X-Rite’s IntelliTrax auto scanning system, and complements X-Rite’s ColorMaster, InkFormulation and other software applications.

Functions

[X] Density

[X] Color*

[X] Match*

[X] Dot

[X] Trap

[X] Print Contrast

[X] Hue Error / Grayness

[X] Paper Indices

[X] Compare

[X] Electronic Function Select (EFS)

*Contains reflectance values ​​and graphical representation


Specifications

Measurement conditions

Illuminant types:                        A, C, D50, D55, D65, D75, F2, F7, F11, F12
Standard observers:                   2°, 10°
Response types:                         ISO Status T, ISO Status E, ISO Status I, ISO Status A, G, Tx, Ax, Ex, Hi-Fi


Measurement technology

Spectral range:                         400nm to 700nm
Measurement geometry:                  45°/0° per ANSI, DIN & ISO Standards
Measurement aperture:                  3.4mm (.13in) standard
                                    2.0mm (.078in) optional
                                    6.0mm (.236in) optional
                                    Micro-Spot: 1.6mm (.063in, H) x 3.2mm (.125in, W) optional
Light source:                              Gas Pressure @ 2856°
Physical filters:                        No (incandescent lamp light), Optional Polarized, Optional UV cutoff
Measurement time:                        Approx. 1.4 seconds per single measurement
                                    Approx. 0.9 seconds in Speed Read mode
Measurement range:                  0.00D–2.5D; 0–160%R
Inter-instrument agreement:            ±0.01 D or 1% for typical printing processes
                                    0.40 ΔE CMC MAX on 12 BCRA Tiles
Density repeatability:                   ±0.005D for 0.00–2.00D*
                                    ±0.010D for 2.00–2.50D*
                                    *Polarized Yellow: ±0.010D for 0.00–1.80D
                                    Micro-Spot: ±0.010D for 0.0–1.8D


Data interface

Serial data interface:                   RS-232 with baud rates 1200 to 57.6K


Power supply

Power source:                         Ni-MH battery pack, 4.8v rated @ 1650mAh
Charge time:                         Approximately 3 hours


Environmental

Operating temperature:                  +10°to +35°C
Humidity:                               30%–85%RH non condensing


Mechanical data

Physical dimensions:                  Length: 197mm (7.8in) Width: 76mm (3.0in) Height: 81mm (3.2in)
Weight:                              1050 grams (2.3lbs.)


















Spare Parts:
As certified matchpart GmbH (Germany) Distributor we provide some spare Parts. Also we can try to find spareparts for you if you have been unsuccsessful to find them. If you have a demand for spare parts use the e-Mail adress service (at) brakensiek (dot) com for inquiries



This item is without packaging:
Not New Sale according to §7 of our AGB, which can bei downloaded here www.brakensiek.com/AGB.pdf The item is used.


Package Deals welcome:
Please make us an reasonable offer for a package deal.


Recertification:
Brakensiek Systemhaus GmbH & Co. KG icertified for the service of recertification. Please contact us for a quote if you need a recertification.


Manuals:
The manual will be send as PDF and the original one will be shipped at additional cost.


Other matching items:
We have other matching items for you, if you use the "search" button on our homepage.


Purchase and Dismantling:
Please offer us your surplus equipment for purchase. Use the mailadress purchase (at) brakensiek (dot) com
Our partner Systembau Dortmund GmbH & Co. KG can dismantle the goods and transport them to us. They are specialists in that and have own all risk insurrance. Our Equipment is seller owned.


We are not authorized reseller of this brand we use the names only for description






Payment:
only wire transfer, no paypal


Translation:
If parties communicate in any other language, the German wording shall still prevail.
The German version of these terms and conditions has precedence over any foreign language versions and is binding in case of doubt.


Advice: Pick up the phone and call us!
Of course you can send questions via the Contact Form.



We are in the process of implementing a new contact form:

Please send your request meantime to

mail (at) Brakensiek (dot) com

Fax +49 231 9852000

or call us

+49 231 9850010

Your Brakensiek Systemhaus GmbH & Co. KG Sales and Support Team

Contact:
Your contact person: Tim Brakensiek
Ampel gebrauchtprodukt     last update:   02.08.2018
Topimage
worldprintmarket.com

Visit the new marketplace for prepress, press und postpress: www.worldprintmarket.com
Optimize your cash-flow by selling your no longer required machines.
Intellitrax

X-Rite IntelliTrax System - automatic spectral color measurement system for sheet, and roll-feed printing units and package-printing units according to PSO for Heidelberg, MAN Roland, KBA, Ryobi, Komori, Wifag, Mitsubishi. In at least 15 seconds you will measure the print control strip and receive a graphic printout of what to change in which zone to meet your deposited standard e.g. PSO.
matchflow adjust

With Matchflow-adjust you can share a pdf-document over the internet for detailed checking and annotation. In this document all project-members (depending on their access-rights) can acquire comments and modifications. By using the "Generated Print Report Button", you generate an new PDF which contains annotation number, username, date, annotation text and type. All comments are saved in a database. So the whole coordination-process is reconstructable at any time. You will save proof and dispatcher costs an maybe need only one final proof. We recommend to insert a flat PDF which can be written from any common workflow system. AGFA Apogee, Heidelberg Prinect, Creo Prinergy, Di Plot, if this function is enabled.
FireWire
SilverFast

Order your FR1SX Firewire-Adapter offer here.
A CD-ROM with actual SilverFast AI Studio + HDR Demo-Version is included in delivery. Please specify your scanner type. We are sure that only an perfect maintained Linotype Hell/Heidelberg Chromagraph S3300/S3400, Nexscan F4100/F4200, Primescan 7100, 8200, 8400 and Tango/Tango XL sowie Topaz HighEnd scanners provide quality and are able to reach Delta E 1 scales after reprofiling. Therefore we provide spare parts and preventive service. Service contracts are possible. After service we peform an new DIN VDE 701 report.
PDF

Dowload and print this article as PDF data sheet: Data Sheet X-Rite 530 Spektraldensitometer
Terms and conditions:
Please only contact us via our registration form and only if you are a business person yourself. Every offer is subject to prior sale and includes your acceptance to our terms & conditions Terms and conditions (AGB) All logos and trademarks on this site are the property of their respective owners.

You will always receive an invoice including tax, which can be paid via wire transfer, in advance or cash. If you register on paypal, you may also pay by charging your paypal account with your credit card. If you are an EU member and you have a validated tax number which can be validated here: VIES VAT number validation / MwSt.-Informationsaustauschsystem MIAS) Validierung der MWSt.-Nummer then you pay tax-free. If you are from outside the EU, you can only pay tax-free, if the export is done with the transport company, called 'Schenker'. If you are not using 'Schenker', we cannot guarantee that we will get the export confirmation in time. In that case, you have to pay tax and you get it.

The website was generated by matchflow and the PDF version was released by matchflow-adust: communicate, control, confirm. Matchflow-adjust provides browser-based PDF correction and PDF annotation with web2print features.
Login | Subscribe to Newsletter | Imprint | Terms and Conditions(AGB) | Contact | Links | Remote Control Win Mac| Stocklist | Purchase List |